Dreamplug, unable to authenticate on wifi AP.
From
agriveaux@deutnet.info@21:1/5 to
All on Mon Oct 18 08:20:01 2021
Hello,
I have some difficults to get wifi working on a dreamplug SBC, i can list wifi network with nmcli :
sudo nmcli device wifi list
IN-USE BSSID SSID MODE CHAN RATE SIGNAL BARS SECURITY
<BSSID> Turris Infra 6 270 Mbit/s 100 ▂▄▆█ WPA2
But when I use this command to login:
sudo nmcli device wifi connect "Turris" password "<password>" ifname wlan0
I get:
Error: Connection activation failed: (7) Secrets were required, but not provided.
The command uses to connect above was used on Raspberry pi 2, Banana pi, Nanopi neo plus 2 without problems.
I use WPA2-PSK with CCMP on access point.
This board doesn't have wifi node on devicetree but the driver seem to autodiscover the wifi adapter:
sudo dmesg | grep libertas
[ 18.097922] libertas_sdio: Libertas SDIO driver
[ 18.102540] libertas_sdio: Copyright Pierre Ossman
[ 19.570800] libertas_sdio mmc0:0001:1 (unnamed net_device) (uninitialized): 00:24:23:3e:f8:ce, fw 10.38.1p25, cap 0x00000303
[ 19.631519] libertas_sdio mmc0:0001:1 wlan0: Marvell WLAN 802.11 adapter
If you have any clues.
Thanks.
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)