Hello!
*snip*
* alpha
- There have been reports about missing firmware for storage devices.
The firmware required for these devices is located in the
"firmware-linux" and "firmware-linux-nonfree" packages but currently
don't have a floppy driver in debian-installer to load additional
firmware. I will figure out how to build CD images including firmware
similar to the images available for i386 and amd64.
- The images now includes the pata-modules package so users previously
missing PATA drivers should be able to install their machines now.
I burned 2 copies of the CD image and put one in each CD drive. The
SRM console can only boot the SCSI drives, and I could successfully
boot the CD. When it got to the point of scanning for hardware, the
installer found the disc in the IDE CDROM (but not the SCSI drive) and
was able to continue the installation by using the second disc. It
found the Ethernet (tulip) as well.
When it came to disk partitioning, the installer could see the IDE
HDDs but not the SCSI ones. I was able to install onto the IDE drives
but since SRM cannot boot them that's not a full solution.
As previously, the installer asked me to install firmware from
removable media, in this case qlogic/1040.bin, and at some point I was
some output mentioning missing qla1280. So these SCSI firmware seem to
be the only real issue at the moment, assuming the required kernel
modules are also available.
Sysop: | Keyop |
---|---|
Location: | Huddersfield, West Yorkshire, UK |
Users: | 355 |
Nodes: | 16 (3 / 13) |
Uptime: | 04:34:11 |
Calls: | 7,656 |
Calls today: | 8 |
Files: | 12,812 |
Messages: | 5,700,753 |