From David Martin@21:1/5 to All on Fri Sep 3 14:30:01 2021
Bonjour à tous,
J'utilise une connexion VPN pour des accès distant sur des serveurs au
boulot.
J'ai donc configuré une connexion VPN dans network-manager, mais pour retrouver internet je dois le désactiver, et ainsi de suite.
Mes collègues sous windows eux, le net fonctionne et ont accès au serveur
via le vpn.
la commande route -n avant d'activer le vpn
Destination Passerelle Genmask Indic Metric Ref Use
Iface
0.0.0.0 192.168.157.1 0.0.0.0 UG 100 0 0 eth
0
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth
0
192.168.157.0 0.0.0.0 255.255.255.0 U 100 0 0 eth
0
et après l'avoir activé
Table de routage IP du noyau
Destination Passerelle Genmask Indic Metric Ref Use
Iface
0.0.0.0 0.0.0.0 0.0.0.0 U 50 0 0 ppp
0
0.0.0.0 192.168.157.1 0.0.0.0 UG 100 0 0 eth
0
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth
0
172.16.0.0 10.0.194.22 255.255.0.0 UG 50 0 0 ppp
0
172.17.0.0 10.0.194.22 255.255.0.0 UG 50 0 0 ppp
0
172.18.0.0 10.0.194.22 255.255.0.0 UG 50 0 0 ppp
0
172.19.0.0 10.0.194.22 255.255.0.0 UG 50 0 0 ppp
0
172.22.234.0 10.0.194.22 255.255.254.0 UG 50 0 0 ppp
0
192.0.2.1 0.0.0.0 255.255.255.255 UH 50 0 0 ppp
0
192.168.157.0 0.0.0.0 255.255.255.0 U 100 0 0 eth
0
192.168.157.1 0.0.0.0 255.255.255.255 UH 100 0 0 eth
0
195.83.235.250 192.168.157.1 255.255.255.255 UGH 100 0 0 eth
0
Comment puis-je faire ? si sous linux c'est possible