• rfkill geht nicht persistent

    From Christian Knoke@21:1/5 to All on Mon Sep 6 11:00:01 2021
    [Da habe ich eben Unsinn gemacht und 180 KB Logs gesendet. Hoffentlich wird
    das gelöscht.]

    [Redacted - Resend]

    Hallo,

    % rfkill block all

    blockt WLAN und BT soft. Nur beim Starten ist wieder alles entsperrt.
    Das ist nicht sinnvoll.

    In der Annahme, ich brauche einen Dienst, der es beim Start richtet,
    habe ich urfkill installiert. Das half nicht.

    Gestern habe ich noch liburfkill-glib0 installiert. Das half auch nicht.

    Nun ist das systemd Journal voll von Meldungen zu rfkill. Vielleicht mag
    jemand hineingucken.

    Wie soll das funktionieren? systemd startet einen Dienst, der beim booten
    die Geräte einstellt, ggffls blockt, und beim runterfahren wieder
    speichert? Kann man die Einstellungen nicht einfach in eine conf Datei schreiben? Das würde reichen, die Tasten (USB-Tastatur) sind weniger wichtig.

    Und wie kriege ich einen "hard block"?

    TIA

    Gruß
    Christian

    -----------------------
    Sep 06 10:08:33 localhost systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
    Sep 06 10:08:35 localhost URfkill[669]: Starting urfkilld version 0.5.0
    Sep 06 10:08:35 localhost dbus-daemon[630]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service' requested by ':1.6' (uid=0 pid=669 comm="/usr/lib/x86_64-linux-gnu/urfkill/urfkilld ")
    Sep 06 10:08:35 localhost kernel: rfkill: input handler disabled
    Sep 06 10:08:35 localhost URfkill[669]: <warning> Failed to write persistence data: Failed to create file “/var/lib/urfkill/saved-states.OTE280”: No such file or directory
    Sep 06 10:08:35 localhost kernel: rfkill: input handler enabled
    Sep 06 10:08:35 localhost systemd[1]: urfkill.service: Main process exited, code=exited, status=1/FAILURE
    Sep 06 10:08:35 localhost systemd[1]: urfkill.service: Failed with result 'exit-code'.
    Sep 06 10:08:35 localhost systemd[1]: urfkill.service: Scheduled restart job, restart counter is at 1.
    Sep 06 10:08:35 localhost URfkill[891]: Starting urfkilld version 0.5.0
    Sep 06 10:08:35 localhost kernel: rfkill: input handler disabled
    Sep 06 10:08:35 localhost URfkill[891]: <warning> Failed to write persistence data: Failed to create file “/var/lib/urfkill/saved-states.Z8ML90”: No such file or directory
    Sep 06 10:08:35 localhost systemd[1]: urfkill.service: Main process exited, code=exited, status=1/FAILURE
    Sep 06 10:08:35 localhost systemd[1]: urfkill.service: Failed with result 'exit-code'.
    Sep 06 10:08:35 localhost kernel: rfkill: input handler enabled
    Sep 06 10:08:35 localhost systemd[1]: urfkill.service: Scheduled restart job, restart counter is at 2.
    Sep 06 10:08:35 localhost URfkill[897]: Starting urfkilld version 0.5.0
    Sep 06 10:08:35 localhost kernel: rfkill: input handler disabled
    Sep 06 10:08:35 localhost URfkill[897]: <warning> Failed to write persistence data: Failed to create file “/var/lib/urfkill/saved-states.DEHO90”: No such file or directory
    Sep 06 10:08:35 localhost systemd[1]: urfkill.service: Main process exited, code=exited, status=1/FAILURE
    Sep 06 10:08:35 localhost systemd[1]: urfkill.service: Failed with result 'exit-code'.
    Sep 06 10:08:35 localhost kernel: rfkill: input handler enabled
    Sep 06 10:08:35 localhost NetworkManager[633]: <info> [1630915715.6649] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/ieee80211/phy0/rfkill1) (driver iwlwifi)
    Sep 06 10:08:35 localhost NetworkManager[633]: <info> [1630915715.6650] manager[0x55b913e12040]: rfkill: Wi-Fi hardware radio set enabled
    Sep 06 10:08:35 localhost NetworkManager[633]: <info> [1630915715.6650] manager[0x55b913e12040]: rfkill: WWAN hardware radio set enabled
    Sep 06 10:08:35 localhost NetworkManager[633]: <info> [1630915715.6720] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
    Sep 06 10:08:35 localhost NetworkManager[633]: <info> [1630915715.6721] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
    Sep 06 10:08:36 localhost systemd[1]: urfkill.service: Scheduled restart job, restart counter is at 3.
    Sep 06 10:08:36 localhost URfkill[905]: Starting urfkilld version 0.5.0
    Sep 06 10:08:36 localhost kernel: rfkill: input handler disabled
    Sep 06 10:08:36 localhost URfkill[905]: <warning> Failed to write persistence data: Failed to create file “/var/lib/urfkill/saved-states.DH6980”: No such file or directory
    Sep 06 10:08:36 localhost kernel: rfkill: input handler enabled
    Sep 06 10:08:36 localhost systemd[1]: urfkill.service: Main process exited, code=exited, status=1/FAILURE
    Sep 06 10:08:36 localhost systemd[1]: urfkill.service: Failed with result 'exit-code'.
    Sep 06 10:08:36 localhost systemd[1]: urfkill.service: Scheduled restart job, restart counter is at 4.
    Sep 06 10:08:36 localhost URfkill[909]: Starting urfkilld version 0.5.0
    Sep 06 10:08:36 localhost kernel: rfkill: input handler disabled
    Sep 06 10:08:36 localhost URfkill[909]: <warning> Failed to write persistence data: Failed to create file “/var/lib/urfkill/saved-states.KXN280”: No such file or directory
    Sep 06 10:08:36 localhost systemd[1]: urfkill.service: Main process exited, code=exited, status=1/FAILURE
    Sep 06 10:08:36 localhost systemd[1]: urfkill.service: Failed with result 'exit-code'.
    Sep 06 10:08:36 localhost kernel: rfkill: input handler enabled
    Sep 06 10:08:36 localhost systemd[1]: urfkill.service: Scheduled restart job, restart counter is at 5.
    Sep 06 10:08:36 localhost systemd[1]: urfkill.service: Start request repeated too quickly.
    Sep 06 10:08:36 localhost systemd[1]: urfkill.service: Failed with result 'exit-code'.
    Sep 06 10:08:40 localhost systemd[1]: systemd-rfkill.service: Succeeded.
    Sep 06 10:08:43 localhost systemd-xdg-autostart-generator[1416]: Exec binary '/usr/libexec/gsd-rfkill' does not exist: No such file or directory
    Sep 06 10:08:54 localhost systemd-xdg-autostart-generator[1539]: Exec binary '/usr/libexec/gsd-rfkill' does not exist: No such file or directory
    Sep 06 10:09:03 localhost rfkill[1854]: block set for all
    Sep 06 10:09:03 localhost NetworkManager[633]: <info> [1630915743.9307] manager: rfkill: Wi-Fi now disabled by radio killswitch
    Sep 06 10:09:08 localhost systemd[1]: systemd-rfkill.service: Succeeded.
    Sep 06 10:13:37 localhost systemd-xdg-autostart-generator[2100]: Exec binary '/usr/libexec/gsd-rfkill' does not exist: No such file or directory
    --------------

    --
    http://cknoke.de

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Ulf Volmer@21:1/5 to Christian Knoke on Mon Sep 6 18:10:02 2021
    On 06.09.21 10:50, Christian Knoke wrote:

    % rfkill block all

    blockt WLAN und BT soft. Nur beim Starten ist wieder alles entsperrt.
    Das ist nicht sinnvoll.

    Das mag stimmen, ist aber meines Wissens nicht vorgesehen.
    Schreib Dir halt eine Unit, die den Status wegspeichert und nach dem
    Reboot wieder restauriert.

    Und wie kriege ich einen "hard block"?

    Indem Du den Schalter am Gerät betätigst.

    Viele Grüße
    Ulf

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Christoph Schmees@21:1/5 to All on Mon Sep 6 19:50:02 2021
    Am 06.09.21 um 16:04 schrieb Ulf Volmer:
    On 06.09.21 10:50, Christian Knoke wrote:

    % rfkill block all

    blockt WLAN und BT soft. Nur beim Starten ist wieder alles entsperrt.
    Das ist nicht sinnvoll.

    Das mag stimmen, ist aber meines Wissens nicht vorgesehen.
    Schreib Dir halt eine Unit, die den Status wegspeichert und nach dem
    Reboot wieder restauriert.

    Und wie kriege ich einen "hard block"?

    Indem Du den Schalter am Gerät betätigst.
    ...
    ..., den nicht alle Geräte haben!

    Aber was immer geht ist per BIOS deaktivieren.

    hth
    Christoph

    --
    Bitte keine Mails von USA-Providern wie AOL, me.com(icloud (Apple),
    gmail (Google), hotmail/outlook.com (Microsoft) oder yahoo.
    Solche Mails werden ohne Rückmeldung gelöscht.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Ulf Volmer@21:1/5 to Christoph Schmees on Mon Sep 6 19:50:02 2021
    On 06.09.21 19:31, Christoph Schmees wrote:
    Am 06.09.21 um 16:04 schrieb Ulf Volmer:
    On 06.09.21 10:50, Christian Knoke wrote:

    Und wie kriege ich einen "hard block"?

    Indem Du den Schalter am Gerät betätigst.
    ...
    ..., den nicht alle Geräte haben!

    Ja, dann geht halt kein Hard Block.

    Aber was immer geht ist per BIOS deaktivieren.

    Was aber nicht zum gleichen Resultat führt.

    Viele Grüße
    Ulf

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Christian Knoke@21:1/5 to Ulf Volmer on Tue Sep 7 12:50:01 2021
    Moin,

    On Mon, 6 Sep 2021 18:04:24 +0200
    Ulf Volmer <u.volmer@u-v.de> wrote:

    On 06.09.21 10:50, Christian Knoke wrote:

    % rfkill block all

    blockt WLAN und BT soft. Nur beim Starten ist wieder alles entsperrt.
    Das ist nicht sinnvoll.

    Das mag stimmen, ist aber meines Wissens nicht vorgesehen.
    Schreib Dir halt eine Unit, die den Status wegspeichert und nach dem
    Reboot wieder restauriert.

    Glücklicherweise hat das schon jemand gemacht:

    ~$ apropos rfkill
    rfkill (8) - Werkzeug zum Aktivieren und Deaktivieren von Drahtlosgeräten
    systemd-rfkill (8) - Laden und Speichern des RF-Kill-Schalters beim Systemstart...
    ...

    Es sieht so aus als ob er läuft, oder doch nicht:

    root@localhost:~# systemctl status systemd-rfkill.socket
    ● systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch
    Loaded: loaded (/lib/systemd/system/systemd-rfkill.socket; static)
    Active: active (listening) since Tue 2021-09-07 11:42:58 CEST; 39min ago
    Triggers: ● systemd-rfkill.service
    Docs: man:systemd-rfkill.socket(8)
    Listen: /dev/rfkill (Special)
    CGroup: /system.slice/systemd-rfkill.socket

    Sep 07 11:42:58 localhost systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
    root@localhost:~# systemctl status systemd-rfkill
    ● systemd-rfkill.service - Load/Save RF Kill Switch Status
    Loaded: loaded (/lib/systemd/system/systemd-rfkill.service; static)
    Active: inactive (dead) since Tue 2021-09-07 11:44:26 CEST; 39min ago TriggeredBy: ● systemd-rfkill.socket
    Docs: man:systemd-rfkill.service(8)
    Process: 1841 ExecStart=/lib/systemd/systemd-rfkill (code=exited, status=0/SUCCESS)
    Main PID: 1841 (code=exited, status=0/SUCCESS)
    CPU: 9ms

    Sep 07 11:44:21 localhost systemd[1]: Starting Load/Save RF Kill Switch Status...
    Sep 07 11:44:21 localhost systemd[1]: Started Load/Save RF Kill Switch Status. Sep 07 11:44:26 localhost systemd[1]: systemd-rfkill.service: Succeeded.

    Den Logfiles nach wird er gestartet, und schaltet Wi-Fi frei. Dann deaktiviere ich es von Hand. Beim Shutdown wird aber nichts gespeichert.

    Die entsprechenden Meldungen des heutigen Boots hänge ich unten an den Text. Ich kann den WLAN Status wirksam ändern, aber gespeichert wird er nicht.

    chris@localhost:~$ ls -l /var/lib/systemd/rfkill/*
    -rw-r--r-- 1 root root 2 7. Sep 11:43 /var/lib/systemd/rfkill/pci-0000:00:14.0-usb-0:10:1.0:bluetooth
    -rw-r--r-- 1 root root 2 7. Sep 11:44 /var/lib/systemd/rfkill/pci-0000:02:00.0:wlan
    chris@localhost:~$ cat /var/lib/systemd/rfkill/*
    1
    1

    Beide sind als "enabled" gespeichert. Das sind sie aber nicht:

    root@localhost:~# LANG= rfkill
    ID TYPE DEVICE SOFT HARD
    0 bluetooth hci0 blocked unblocked
    1 wlan phy0 blocked unblocked

    Gruß
    Christian



    SHUTDOWN 2
    --
    Sep 07 00:23:17 localhost systemd-xdg-autostart-generator[2035]: Not generating service for XDG autostart app-org.gnome.Evolution\x2dalarm\x2dnotify-autostart.service, error parsing Exec= line: No such file or directory
    Sep 07 00:23:17 localhost systemd-xdg-autostart-generator[2035]: Exec binary '/usr/libexec/gsd-rfkill' does not exist: No such file or directory
    Sep 07 00:23:17 localhost systemd-xdg-autostart-generator[2035]: Not generating service for XDG autostart app-org.gnome.SettingsDaemon.Rfkill-autostart.service, error parsing Exec= line: No such file or directory
    --
    Sep 07 00:25:29 localhost systemd[1]: Closed LVM2 poll daemon socket.
    Sep 07 00:25:29 localhost systemd[1]: systemd-rfkill.socket: Succeeded.
    Sep 07 00:25:29 localhost systemd[1]: Closed Load/Save RF Kill Switch Status /dev/rfkill Watch.
    Sep 07 00:25:29 localhost ModemManager[804]: <info> caught signal, shutting down...
    --

    BOOT 3
    --
    Sep 07 11:42:58 localhost systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
    Sep 07 11:42:58 localhost systemd[1]: Starting Load/Save RF Kill Switch Status...
    --
    Sep 07 11:43:00 localhost ModemManager[791]: <info> ModemManager (version 1.14.12) starting in system bus...
    Sep 07 11:43:00 localhost bluetoothd[621]: Failed to set mode: Blocked through rfkill (0x12)
    --
    Sep 07 11:43:01 localhost NetworkManager[627]: <info> [1631007781.0274] dns-mgr[0x561f798f1170]: init: dns=default,systemd-resolved rc-manager=resolvconf (auto)
    Sep 07 11:43:01 localhost NetworkManager[627]: <info> [1631007781.0278] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/ieee80211/phy0/rfkill1) (driver iwlwifi)
    Sep 07 11:43:01 localhost NetworkManager[627]: <info> [1631007781.0279] manager[0x561f798f7030]: rfkill: Wi-Fi hardware radio set enabled
    Sep 07 11:43:01 localhost NetworkManager[627]: <info> [1631007781.0279] manager[0x561f798f7030]: rfkill: WWAN hardware radio set enabled
    Sep 07 11:43:01 localhost NetworkManager[627]: <info> [1631007781.0299] Loaded device plugin: NMAtmManager (/usr/lib/x86_64-linux-gnu/NetworkManager/1.30.0/libnm-device-plugin-adsl.so)
    --
    Sep 07 11:43:01 localhost NetworkManager[627]: <info> [1631007781.0346] Loaded device plugin: NMWifiFactory (/usr/lib/x86_64-linux-gnu/NetworkManager/1.30.0/libnm-device-plugin-wifi.so)
    Sep 07 11:43:01 localhost NetworkManager[627]: <info> [1631007781.0347] manager: rfkill: Wi-Fi disabled by radio killswitch; enabled by state file
    Sep 07 11:43:01 localhost NetworkManager[627]: <info> [1631007781.0347] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
    Sep 07 11:43:01 localhost NetworkManager[627]: <info> [1631007781.0348] manager: Networking is disabled by state file
    --
    Sep 07 11:43:01 localhost NetworkManager[627]: <info> [1631007781.0401] manager: rfkill: Wi-Fi now enabled by radio killswitch
    Sep 07 11:43:01 localhost systemd[1]: Started Network Manager Script Dispatcher Service.
    --
    Sep 07 11:43:06 localhost systemd[1]: systemd-rfkill.service: Succeeded.
    --
    Sep 07 11:43:07 localhost systemd-xdg-autostart-generator[1451]: Not generating service for XDG autostart app-org.gnome.SettingsDaemon.Housekeeping-autostart.service, error parsing Exec= line: No such file or directory
    Sep 07 11:43:07 localhost systemd-xdg-autostart-generator[1451]: Exec binary '/usr/libexec/gsd-rfkill' does not exist: No such file or directory
    Sep 07 11:43:07 localhost systemd-xdg-autostart-generator[1451]: Not generating service for XDG autostart app-org.gnome.SettingsDaemon.Rfkill-autostart.service, error parsing Exec= line: No such file or directory
    --
    Sep 07 11:43:16 localhost systemd-xdg-autostart-generator[1514]: Not generating service for XDG autostart app-org.gnome.SettingsDaemon.PrintNotifications-autostart.service, error parsing Exec= line: No such file or directory
    Sep 07 11:43:16 localhost systemd-xdg-autostart-generator[1514]: Exec binary '/usr/libexec/gsd-rfkill' does not exist: No such file or directory
    Sep 07 11:43:16 localhost systemd-xdg-autostart-generator[1514]: Not generating service for XDG autostart app-org.gnome.SettingsDaemon.Rfkill-autostart.service, error parsing Exec= line: No such file or directory
    --
    Sep 07 11:44:21 localhost rfkill[1839]: block set for all
    Sep 07 11:44:21 localhost systemd[1]: Starting Load/Save RF Kill Switch Status...
    Sep 07 11:44:21 localhost NetworkManager[627]: <info> [1631007861.9658] manager: rfkill: Wi-Fi now disabled by radio killswitch
    Sep 07 11:44:21 localhost systemd[1]: Started Load/Save RF Kill Switch Status. Sep 07 11:44:26 localhost systemd[1]: systemd-rfkill.service: Succeeded.
    --


    --
    http://cknoke.de

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Ulf Volmer@21:1/5 to Christian Knoke on Tue Sep 7 16:10:01 2021
    On 07.09.21 12:42, Christian Knoke wrote:
    On Mon, 6 Sep 2021 18:04:24 +0200
    Ulf Volmer <u.volmer@u-v.de> wrote:

    Schreib Dir halt eine Unit, die den Status wegspeichert und nach dem
    Reboot wieder restauriert.

    Glücklicherweise hat das schon jemand gemacht:

    ~$ apropos rfkill
    rfkill (8) - Werkzeug zum Aktivieren und Deaktivieren von Drahtlosgeräten
    systemd-rfkill (8) - Laden und Speichern des RF-Kill-Schalters beim Systemstart...

    Danke, kannte ich noch nicht.

    chris@localhost:~$ ls -l /var/lib/systemd/rfkill/*
    -rw-r--r-- 1 root root 2 7. Sep 11:43 /var/lib/systemd/rfkill/pci-0000:00:14.0-usb-0:10:1.0:bluetooth
    -rw-r--r-- 1 root root 2 7. Sep 11:44 /var/lib/systemd/rfkill/pci-0000:02:00.0:wlan
    chris@localhost:~$ cat /var/lib/systemd/rfkill/*
    1
    1

    Beide sind als "enabled" gespeichert. Das sind sie aber nicht:

    root@localhost:~# LANG= rfkill
    ID TYPE DEVICE SOFT HARD
    0 bluetooth hci0 blocked unblocked
    1 wlan phy0 blocked unblocked

    Bist Du sicher, dass das 1 für enabled steht? Hier (ich habe gerade nur
    ein Fedora zur Hand, booten möchte ich auch nur ungern) sieht das anders
    aus:

    [ulf@p330 ~]$ rfkill
    ID TYPE DEVICE SOFT HARD
    0 bluetooth hci0 unblocked unblocked
    [ulf@p330 ~]$ cat /var/lib/systemd/rfkill/pci-0000\:00\:14.0-usb-0\:4\:1.0\:bluetooth

    0
    [ulf@p330 ~]$ rfkill block 0
    [ulf@p330 ~]$ rfkill
    ID TYPE DEVICE SOFT HARD
    0 bluetooth hci0 blocked unblocked
    [ulf@p330 ~]$ cat /var/lib/systemd/rfkill/pci-0000\:00\:14.0-usb-0\:4\:1.0\:bluetooth
    1

    Viele Grüße
    Ulf

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Michael Biebl@21:1/5 to All on Tue Sep 7 17:20:01 2021
    On 07.09.21 12:42, Christian Knoke wrote:
    On Mon, 6 Sep 2021 18:04:24 +0200
    Ulf Volmer <u.volmer@u-v.de> wrote:

    Schreib Dir halt eine Unit, die den Status wegspeichert und nach dem
    Reboot wieder restauriert.

    Glücklicherweise hat das schon jemand gemacht:

    ~$ apropos rfkill
    rfkill (8) - Werkzeug zum Aktivieren und Deaktivieren von
    Drahtlosgeräten
    systemd-rfkill (8) - Laden und Speichern des RF-Kill-Schalters beim
    Systemstart...

    Danke, kannte ich noch nicht.

    chris@localhost:~$ ls -l /var/lib/systemd/rfkill/*
    -rw-r--r-- 1 root root 2 7. Sep 11:43 /var/lib/systemd/rfkill/pci-
    0000:00:14.0-usb-0:10:1.0:bluetooth
    -rw-r--r-- 1 root root 2 7. Sep 11:44 /var/lib/systemd/rfkill/pci-
    0000:02:00.0:wlan
    chris@localhost:~$ cat /var/lib/systemd/rfkill/*
    1
    1

    Beide sind als "enabled" gespeichert. Das sind sie aber nicht:

    root@localhost:~# LANG= rfkill
    ID TYPE DEVICE SOFT HARD
    0 bluetooth hci0 blocked unblocked
    1 wlan phy0 blocked unblocked

    Bist Du sicher, dass das 1 für enabled steht?

    1 bedeuted disabled. Das passt zu dem output von rfkill, der beide geräte
    als soft-blocked anzeigt.

    -----BEGIN PGP SIGNATURE-----

    iQIzBAABCAAdFiEECbOsLssWnJBDRcxUauHfDWCPItwFAmE3gRoACgkQauHfDWCP Itzk/xAAhok8yV0ZUIvc6+zO5PoAEfQ1Ow3EJXGYk7999JoghQo/a3mJlvPmmR18 pZgIY5glSMcD1HFNaH+d5Xo+jp66+5KW+QL6v4Ajc0xk+SwGRQSPFJghWyG8jVmd NlHOnnKWsZSBMoSSl6VIFmSjfvWaxhpyp39C9SQmF4omEVlY2MoTlI6zX1llxLA2 lH9O3Uu3QZ+IfSFUMvv28IRxsywfypIe0DnelvrJ4UXwCkwzioE9csPc1gj8l1Bn r89G17bc43YthqhfokaUWwTIJg5iEwqfZiXcnQmHvcKhCZvo7w+MQSXb1Tcpx/PI IfOsyV2Uchy+/h4EeCcLVOTCpj6ktWBMJc8MfesCZ4ltx01YC1SiP0AelvU+0CfR PncRCDJCmUFh2wjPIa/AolcnxH3WS02JX1IEKMfQIJyWZF5Tk6Zq6yZmzXtL6rIV /svAr1rlDMSYZaSd9JSqOos23XahahjBa2lI/pb+TYGtkoOkKBOV2s3M03wQ9p2R QOieP9zXzJxenKA79rZO5paUvrMFpr1/7S04Go6d+kDGJQLKTgUfCnfewVBNBz62 +FeYBoDDKCWlmXKa8Ctrk8d0AWnW6WN4RBEe0pA8SVHvncS0nS/U4ACWszMHIc0U dYkkmE+Caa0H/bF+nEQT2+HUf58IEn/uG2PZ06oQcIezud5EJDA=
    =/z0c
    -----END PGP SIGNATURE-----

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)