Hi!

Today's installer images for ia64 [1] include a fix for GRUB so that the
images are finally bootable again. Since the 5.10 kernel in use already contains a lot of ia64 fixes, it will work on many ia64 machines already
except for larger machines like the RX2800 which require at least kernel
5.12.

Since Debian unstable is currently effectively frozen due to testing being frozen for the imminent release, the kernel package in Debian unstable is currently stuck at version 5.10 until Debian Bullseye is released which
should happen within the next weeks [2].

So while installing on RX2800 and similar machines currently does not work
yet, most smaller ia64 machines should work and I would therefore like to
get some installation reports for ia64 with today's images.

Thanks,
Adrian

[1] https://cdimage.debian.org/cdimage/ports/snapshots/2021-04-17/
[2] https://lists.debian.org/debian-release/2021/04/msg00187.html

--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

Hello!

On 4/17/21 8:58 PM, John Paul Adrian Glaubitz wrote:

Today's installer images for ia64 [1] include a fix for GRUB so that the images are finally bootable again. Since the 5.10 kernel in use already contains a lot of ia64 fixes, it will work on many ia64 machines already except for larger machines like the RX2800 which require at least kernel 5.12.

Just to confirm: I built and installed kernel 5.12-rc8 on an RX2800 today and it boots fine without any additional patches. That means once 5.12 hits Debian unstable, we will have working installer images for RX2800 and similar machines again for the first time since Debian Wheezy (or even Squeeze since Wheezy had elilo issues on some of these machines).

Adrian

--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On 4/19/21 11:54 PM, John Paul Adrian Glaubitz wrote:

Let's move this to the list.

Here is the firmware information for my RX2660:

[mp0017a499dd1c] MP:CM> sysrev

And my RAID controller has firmware 7.24. I did actually have SMP issues
when the firmware version of the RAID controller was too old.

The machine booted fine with "nosmp" with the old RAID firmware though.

Make sure your RAID controller firmware is very recent as well. I think
7.24 was the most recent version that was publicly available.

Adrian

--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

Hi Pedro!

On 4/19/21 11:45 PM, Pedro Miguel Justo wrote:

On Apr 19, 2021, at 10:30 PM, Pedro Miguel Justo <pmsjt@texair.net<mailto:pmsjt@texair.net>> wrote:

When I try to boot the new install image on my rx2660 this is what I get:

Try updating to the latest firmware versions for EFI and the RAID controller.

Let's move this to the list.

Here is the firmware information for my RX2660:

[mp0017a499dd1c] MP:CM> sysrev


SYSREV

Current firmware revisions

MP FW : F.02.17
BMC FW : 05.23
EFI FW : ROM A 05.63, ROM B 07.12
System FW : ROM A 01.00, ROM B 04.04, Boot ROM B
PDH FW : 50.07
UCIO FW : 03.0b
PRS FW : 00.08 UpSeqRev: 02, DownSeqRev: 01




[mp0017a499dd1c] MP:CM>

Adrian

--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On 4/20/21 12:07 AM, Pedro Miguel Justo wrote:

Regarding the storage, isn’t it too early in the boot process for this to be storage FW related?

I can only say that I did have kernel crashes due to an outdated firmware version on the RAID controller which could be worked around by booting
with "nosmp".

I currently have no other idea as the kernel boots fine on my RX2660 and
it's already late here.

Adrian

--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On 4/20/21 12:14 AM, Pedro Miguel Justo wrote:

On 2021/Apr/19, at 15:10, John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> wrote:

On 4/20/21 12:07 AM, Pedro Miguel Justo wrote:

Regarding the storage, isn’t it too early in the boot process for this to be storage FW related?

I can only say that I did have kernel crashes due to an outdated firmware
version on the RAID controller which could be worked around by booting
with "nosmp".

My RAID controller has 7.18, so that is older. I should get that upgraded.

I tried with “nosmp” - still no dice. Same crash followed by the same hang.

Then I'm currently out of ideas. It boots fine on my RX2660, as I said.

You might want to try 5.12-rc8 on your machine.

Adrian

--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

Hi Sergei!

Below is a backtrace of a crash on an RX-2660 that one user is reporting.

Not sure what the problem is as the same kernel boots fine on my RX-2660,
but maybe you have an idea?

Adrian

On 4/19/21 10:30 PM, Pedro Miguel Justo wrote:

When I try to boot the new install image on my rx2660 this is what I get:

[ 0.592000] usercopy: Kernel memory overwrite attempt detected to linear kernel text (offset 7733248, size 1)!
[ 0.592000] cryptomgr_test[65]: bugcheck! 0 [1]
[ 0.592000] Modules linked in:
[ 0.592000]
[ 0.592000] CPU: 6 PID: 65 Comm: cryptomgr_test Not tainted 5.10.0-6-itanium #1 Debian 5.10.28-1
[ 0.596000] Hardware name: hp server rx2660 , BIOS 04.30 03/05/2012
[ 0.596000] psr : 00001010084a6010 ifs : 8000000000000410 ip : [<a0000001011e06b0>] Not tainted (5.10.0-6-itanium Debian 5.10.28-1)
[ 0.596000] ip is at usercopy_abort+0x120/0x130
[ 0.596000] unat: 0000000000000000 pfs : 0000000000000410 rsc : 0000000000000003
[ 0.596000] rnat: 0000000000000000 bsps: 0000000000000000 pr : 00000021559aaa55
[ 0.596000] ldrs: 0000000000000000 ccv : 00000000fffff08d fpsr: 0009804c8a70433f
[ 0.596000] csd : 0000000000000000 ssd : 0000000000000000
[ 0.596000] b0 : a0000001011e06b0 b6 : a0000001009e9a80 b7 : a0000001007aef00
[ 0.596000] f6 : 1003e0000000000000000 f7 : 1003e0044b82fa09b5a53
[ 0.596000] f8 : 1003e00000000000004bc f9 : 1003e0000000004692680
[ 0.596000] f10 : 1003e20c49ba5e353f7cf f11 : 1003e0000000000908800
[ 0.596000] r1 : a000000101a4b5d0 r2 : a0000001017e4b18 r3 : a0000001017e4b20
[ 0.596000] r8 : 000000000000001f r9 : 0000000000000001 r10 : 0000000000000000
[ 0.596000] r11 : 00000000ffffefff r12 : e000000100757c70 r13 : e000000100750000
[ 0.596000] r14 : ffffffffffd99548 r15 : a0000001017e4b20 r16 : e0000000012c0000
[ 0.596000] r17 : 0000000000004000 r18 : 000000000000008e r19 : 000000000000051a
[ 0.596000] r20 : 000000000000051a r21 : 000000000000051a r22 : 000000000000051c
[ 0.596000] r23 : 000000000000051c r24 : 000000000000051c r25 : 0000000000004000
[ 0.596000] r26 : 000000000000000c r27 : a0000001017ccb18 r28 : 0000000000001000
[ 0.596000] r29 : ffffffffffd18c61 r30 : a000000101764231 r31 : 0000000000000001
[ 0.596000]
[ 0.596000] Call Trace:
[ 0.596000] [<a000000100014c50>] show_stack+0x90/0xc0
[ 0.596000] sp=e0000001007578b0 bsp=e000000100751560
[ 0.596000] [<a000000100015360>] show_regs+0x6e0/0xa40
[ 0.596000] sp=e000000100757a80 bsp=e0000001007514f0
[ 0.596000] [<a0000001000275d0>] die+0x1b0/0x4a0
[ 0.596000] sp=e000000100757aa0 bsp=e0000001007514b0
[ 0.596000] [<a0000001011fb460>] ia64_bad_break+0x740/0x760
[ 0.596000] sp=e000000100757aa0 bsp=e000000100751480
[ 0.596000] [<a00000010000ca20>] ia64_leave_kernel+0x0/0x270
[ 0.596000] sp=e000000100757aa0 bsp=e000000100751480
[ 0.596000] [<a0000001011e06b0>] usercopy_abort+0x120/0x130
[ 0.596000] sp=e000000100757c70 bsp=e000000100751400
[ 0.596000] [<a00000010047c6b0>] __check_object_size+0x330/0x3a0
[ 0.596000] sp=e000000100757c80 bsp=e0000001007513c0
[ 0.596000] [<a0000001007bc580>] build_test_sglist+0x500/0x8c0
[ 0.596000] sp=e000000100757c80 bsp=e000000100751300
[ 0.596000] [<a0000001007be240>] test_shash_vec_cfg+0x1e0/0xcc0
[ 0.596000] sp=e000000100757d00 bsp=e000000100751250
[ 0.596000] [<a0000001007c35f0>] __alg_test_hash.constprop.0+0x2d0/0x740 [ 0.596000] sp=e000000100757da0 bsp=e000000100751198
[ 0.596000] [<a0000001007c3b70>] alg_test_hash+0x110/0x2e0
[ 0.596000] sp=e000000100757db0 bsp=e000000100751140
[ 0.596000] [<a0000001007bf930>] alg_test+0xc10/0xe80
[ 0.596000] sp=e000000100757db0 bsp=e0000001007510c0
[ 0.596000] [<a0000001007b8e40>] cryptomgr_test+0x80/0xc0
[ 0.596000] sp=e000000100757e30 bsp=e0000001007510a0
[ 0.596000] [<a0000001000ba870>] kthread+0x270/0x2a0
[ 0.596000] sp=e000000100757e30 bsp=e000000100751058
[ 0.596000] [<a00000010000c810>] call_payload+0x50/0x80
[ 0.596000] sp=e000000100757e30 bsp=e000000100751040
[ 0.596000] Disabling lock debugging due to kernel taint
[ 6.796000] random: crng init done

--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On Tue, 27 Apr 2021 09:18:38 +0200
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> wrote:

Hi Sergei!

Below is a backtrace of a crash on an RX-2660 that one user is reporting.

Not sure what the problem is as the same kernel boots fine on my RX-2660,
but maybe you have an idea?

Adrian

On 4/19/21 10:30 PM, Pedro Miguel Justo wrote:

When I try to boot the new install image on my rx2660 this is what I get:

[ 0.592000] usercopy: Kernel memory overwrite attempt detected to linear kernel text (offset 7733248, size 1)!
[ 0.592000] cryptomgr_test[65]: bugcheck! 0 [1]
[ 0.592000] Modules linked in:
[ 0.592000]
[ 0.592000] CPU: 6 PID: 65 Comm: cryptomgr_test Not tainted 5.10.0-6-itanium #1 Debian 5.10.28-1
[ 0.596000] Hardware name: hp server rx2660 , BIOS 04.30 03/05/2012
[ 0.596000] psr : 00001010084a6010 ifs : 8000000000000410 ip : [<a0000001011e06b0>] Not tainted (5.10.0-6-itanium Debian 5.10.28-1)
[ 0.596000] ip is at usercopy_abort+0x120/0x130
[ 0.596000] unat: 0000000000000000 pfs : 0000000000000410 rsc : 0000000000000003
[ 0.596000] rnat: 0000000000000000 bsps: 0000000000000000 pr : 00000021559aaa55
[ 0.596000] ldrs: 0000000000000000 ccv : 00000000fffff08d fpsr: 0009804c8a70433f
[ 0.596000] csd : 0000000000000000 ssd : 0000000000000000
[ 0.596000] b0 : a0000001011e06b0 b6 : a0000001009e9a80 b7 : a0000001007aef00
[ 0.596000] f6 : 1003e0000000000000000 f7 : 1003e0044b82fa09b5a53
[ 0.596000] f8 : 1003e00000000000004bc f9 : 1003e0000000004692680
[ 0.596000] f10 : 1003e20c49ba5e353f7cf f11 : 1003e0000000000908800
[ 0.596000] r1 : a000000101a4b5d0 r2 : a0000001017e4b18 r3 : a0000001017e4b20
[ 0.596000] r8 : 000000000000001f r9 : 0000000000000001 r10 : 0000000000000000
[ 0.596000] r11 : 00000000ffffefff r12 : e000000100757c70 r13 : e000000100750000
[ 0.596000] r14 : ffffffffffd99548 r15 : a0000001017e4b20 r16 : e0000000012c0000
[ 0.596000] r17 : 0000000000004000 r18 : 000000000000008e r19 : 000000000000051a
[ 0.596000] r20 : 000000000000051a r21 : 000000000000051a r22 : 000000000000051c
[ 0.596000] r23 : 000000000000051c r24 : 000000000000051c r25 : 0000000000004000
[ 0.596000] r26 : 000000000000000c r27 : a0000001017ccb18 r28 : 0000000000001000
[ 0.596000] r29 : ffffffffffd18c61 r30 : a000000101764231 r31 : 0000000000000001
[ 0.596000]
[ 0.596000] Call Trace:
[ 0.596000] [<a000000100014c50>] show_stack+0x90/0xc0
[ 0.596000] sp=e0000001007578b0 bsp=e000000100751560
[ 0.596000] [<a000000100015360>] show_regs+0x6e0/0xa40
[ 0.596000] sp=e000000100757a80 bsp=e0000001007514f0
[ 0.596000] [<a0000001000275d0>] die+0x1b0/0x4a0
[ 0.596000] sp=e000000100757aa0 bsp=e0000001007514b0
[ 0.596000] [<a0000001011fb460>] ia64_bad_break+0x740/0x760
[ 0.596000] sp=e000000100757aa0 bsp=e000000100751480
[ 0.596000] [<a00000010000ca20>] ia64_leave_kernel+0x0/0x270
[ 0.596000] sp=e000000100757aa0 bsp=e000000100751480
[ 0.596000] [<a0000001011e06b0>] usercopy_abort+0x120/0x130
[ 0.596000] sp=e000000100757c70 bsp=e000000100751400
[ 0.596000] [<a00000010047c6b0>] __check_object_size+0x330/0x3a0
[ 0.596000] sp=e000000100757c80 bsp=e0000001007513c0
[ 0.596000] [<a0000001007bc580>] build_test_sglist+0x500/0x8c0
[ 0.596000] sp=e000000100757c80 bsp=e000000100751300
[ 0.596000] [<a0000001007be240>] test_shash_vec_cfg+0x1e0/0xcc0
[ 0.596000] sp=e000000100757d00 bsp=e000000100751250
[ 0.596000] [<a0000001007c35f0>] __alg_test_hash.constprop.0+0x2d0/0x740
[ 0.596000] sp=e000000100757da0 bsp=e000000100751198
[ 0.596000] [<a0000001007c3b70>] alg_test_hash+0x110/0x2e0
[ 0.596000] sp=e000000100757db0 bsp=e000000100751140
[ 0.596000] [<a0000001007bf930>] alg_test+0xc10/0xe80
[ 0.596000] sp=e000000100757db0 bsp=e0000001007510c0
[ 0.596000] [<a0000001007b8e40>] cryptomgr_test+0x80/0xc0
[ 0.596000] sp=e000000100757e30 bsp=e0000001007510a0
[ 0.596000] [<a0000001000ba870>] kthread+0x270/0x2a0
[ 0.596000] sp=e000000100757e30 bsp=e000000100751058
[ 0.596000] [<a00000010000c810>] call_payload+0x50/0x80
[ 0.596000] sp=e000000100757e30 bsp=e000000100751040
[ 0.596000] Disabling lock debugging due to kernel taint
[ 6.796000] random: crng init done

Yeah, usercopy check is currently broken.

I workaround it locally with using linear mapping (seems not to break
anything on ia64), but I'm not sure it's correct for all arches.

Need to spend some time before sending out in a proper form.

--- a/arch/ia64/include/asm/processor.h
+++ b/arch/ia64/include/asm/processor.h
@@ -642,6 +642,12 @@ ia64_imva (void *addr)
result = (void *) ia64_tpa(addr);
return __va(result);
}
+/* ia64 has multiple virtual-to-physical kernel mappings:
+ * 1. identity mapping (kernel region=7)
+ * 2. gate mapping (gate region=5)
+ * we convert both to identity mapping, do we break contiguity assumption?
+ */
+#define lm_alias(x) ia64_imva((void*)(x))

#define ARCH_HAS_PREFETCH
#define ARCH_HAS_PREFETCHW
diff --git a/mm/usercopy.c b/mm/usercopy.c
index b3de3c4eefba..a0f4682eac8e 100644
--- a/mm/usercopy.c
+++ b/mm/usercopy.c
@@ -262,6 +262,9 @@ void __check_object_size(const void *ptr, unsigned long n, bool to_user)
if (!n)
return;

+ /* Resolve virtual address to linear address. */
+ ptr = lm_alias(ptr);
+
/* Check for invalid addresses. */
check_bogus_address((const unsigned long)ptr, n, to_user);

--

Sergei

--- SoupGate-Win32 v1.05
* Origin: f

Hello Pedro!

I have run into the exact crash on an RX2800 on kernel 5.14.6.

However, I was able to mitigate the problem by passing

hardened_usercopy=off

on the kernel command line.

Please give it a try with the latest images which use kernel 5.14.6 [1].

Adrian

[1] https://cdimage.debian.org/cdimage/ports/snapshots/2021-09-21/

On 4/19/21 10:30 PM, Pedro Miguel Justo wrote:

When I try to boot the new install image on my rx2660 this is what I get:

[ 0.592000] usercopy: Kernel memory overwrite attempt detected to linear kernel text (offset 7733248, size 1)!
[ 0.592000] cryptomgr_test[65]: bugcheck! 0 [1]
[ 0.592000] Modules linked in:
[ 0.592000]
[ 0.592000] CPU: 6 PID: 65 Comm: cryptomgr_test Not tainted 5.10.0-6-itanium #1 Debian 5.10.28-1
[ 0.596000] Hardware name: hp server rx2660 , BIOS 04.30 03/05/2012
[ 0.596000] psr : 00001010084a6010 ifs : 8000000000000410 ip : [<a0000001011e06b0>] Not tainted (5.10.0-6-itanium Debian 5.10.28-1)
[ 0.596000] ip is at usercopy_abort+0x120/0x130
[ 0.596000] unat: 0000000000000000 pfs : 0000000000000410 rsc : 0000000000000003
[ 0.596000] rnat: 0000000000000000 bsps: 0000000000000000 pr : 00000021559aaa55
[ 0.596000] ldrs: 0000000000000000 ccv : 00000000fffff08d fpsr: 0009804c8a70433f
[ 0.596000] csd : 0000000000000000 ssd : 0000000000000000
[ 0.596000] b0 : a0000001011e06b0 b6 : a0000001009e9a80 b7 : a0000001007aef00
[ 0.596000] f6 : 1003e0000000000000000 f7 : 1003e0044b82fa09b5a53
[ 0.596000] f8 : 1003e00000000000004bc f9 : 1003e0000000004692680
[ 0.596000] f10 : 1003e20c49ba5e353f7cf f11 : 1003e0000000000908800
[ 0.596000] r1 : a000000101a4b5d0 r2 : a0000001017e4b18 r3 : a0000001017e4b20
[ 0.596000] r8 : 000000000000001f r9 : 0000000000000001 r10 : 0000000000000000
[ 0.596000] r11 : 00000000ffffefff r12 : e000000100757c70 r13 : e000000100750000
[ 0.596000] r14 : ffffffffffd99548 r15 : a0000001017e4b20 r16 : e0000000012c0000
[ 0.596000] r17 : 0000000000004000 r18 : 000000000000008e r19 : 000000000000051a
[ 0.596000] r20 : 000000000000051a r21 : 000000000000051a r22 : 000000000000051c
[ 0.596000] r23 : 000000000000051c r24 : 000000000000051c r25 : 0000000000004000
[ 0.596000] r26 : 000000000000000c r27 : a0000001017ccb18 r28 : 0000000000001000
[ 0.596000] r29 : ffffffffffd18c61 r30 : a000000101764231 r31 : 0000000000000001
[ 0.596000]
[ 0.596000] Call Trace:
[ 0.596000] [<a000000100014c50>] show_stack+0x90/0xc0
[ 0.596000] sp=e0000001007578b0 bsp=e000000100751560
[ 0.596000] [<a000000100015360>] show_regs+0x6e0/0xa40
[ 0.596000] sp=e000000100757a80 bsp=e0000001007514f0
[ 0.596000] [<a0000001000275d0>] die+0x1b0/0x4a0
[ 0.596000] sp=e000000100757aa0 bsp=e0000001007514b0
[ 0.596000] [<a0000001011fb460>] ia64_bad_break+0x740/0x760
[ 0.596000] sp=e000000100757aa0 bsp=e000000100751480
[ 0.596000] [<a00000010000ca20>] ia64_leave_kernel+0x0/0x270
[ 0.596000] sp=e000000100757aa0 bsp=e000000100751480
[ 0.596000] [<a0000001011e06b0>] usercopy_abort+0x120/0x130
[ 0.596000] sp=e000000100757c70 bsp=e000000100751400
[ 0.596000] [<a00000010047c6b0>] __check_object_size+0x330/0x3a0
[ 0.596000] sp=e000000100757c80 bsp=e0000001007513c0
[ 0.596000] [<a0000001007bc580>] build_test_sglist+0x500/0x8c0
[ 0.596000] sp=e000000100757c80 bsp=e000000100751300
[ 0.596000] [<a0000001007be240>] test_shash_vec_cfg+0x1e0/0xcc0
[ 0.596000] sp=e000000100757d00 bsp=e000000100751250
[ 0.596000] [<a0000001007c35f0>] __alg_test_hash.constprop.0+0x2d0/0x740 >> [ 0.596000] sp=e000000100757da0 bsp=e000000100751198
[ 0.596000] [<a0000001007c3b70>] alg_test_hash+0x110/0x2e0
[ 0.596000] sp=e000000100757db0 bsp=e000000100751140
[ 0.596000] [<a0000001007bf930>] alg_test+0xc10/0xe80
[ 0.596000] sp=e000000100757db0 bsp=e0000001007510c0
[ 0.596000] [<a0000001007b8e40>] cryptomgr_test+0x80/0xc0
[ 0.596000] sp=e000000100757e30 bsp=e0000001007510a0
[ 0.596000] [<a0000001000ba870>] kthread+0x270/0x2a0
[ 0.596000] sp=e000000100757e30 bsp=e000000100751058
[ 0.596000] [<a00000010000c810>] call_payload+0x50/0x80
[ 0.596000] sp=e000000100757e30 bsp=e000000100751040
[ 0.596000] Disabling lock debugging due to kernel taint
[ 6.796000] random: crng init done

--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)