This is a multi-part MIME message sent by reportbug.


Source: libverto
Version: 0.3.1-1
Severity: serious
Tags: patch pending sid trixie
Justification: library ABI skew on upgrade
User: debian-arm@lists.debian.org
Usertags: time-t

NOTICE: these changes must not be uploaded to unstable yet!

Dear maintainer,

As part of the 64-bit time_t transition required to support 32-bit architectures in 2038 and beyond (https://wiki.debian.org/ReleaseGoals/64bit-time), we have identified
libverto as a source package shipping runtime libraries whose ABI
either is affected by the change in size of time_t, or could not be
analyzed via abi-compliance-checker (and therefore to be on the safe
side we assume is affected).

To ensure that inconsistent combinations of libraries with their reverse-dependencies are never installed together, it is necessary to
have a library transition, which is most easily done by renaming the
runtime library package.

Since turning on 64-bit time_t is being handled centrally through a change
to the default dpkg-buildflags (https://bugs.debian.org/1037136), it is important that libraries affected by this ABI change all be uploaded close together in time. Therefore I have prepared a 0-day NMU for libverto
which will initially be uploaded to experimental if possible, then to
unstable after packages have cleared binary NEW.

Please find the patch for this NMU attached.

If you have any concerns about this patch, please reach out ASAP. Although this package will be uploaded to experimental immediately, there will be a period of several days before we begin uploads to unstable; so if information becomes available that your package should not be included in the transition, there is time for us to amend the planned uploads.



-- System Information:
Debian Release: trixie/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 6.5.0-14-generic (SMP w/12 CPU threads; PREEMPT)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE
Locale: LANG=C, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)

diff -Nru libverto-0.3.1/debian/changelog libverto-0.3.1/debian/changelog
--- libverto-0.3.1/debian/changelog 2020-06-08 13:37:48.000000000 +0000
+++ libverto-0.3.1/debian/changelog 2024-02-02 18:18:10.000000000 +0000
@@ -1,3 +1,10 @@
+libverto (0.3.1-1.1) experimental; urgency=medium
+
+ * Non-maintainer upload.
+ * Rename libraries for 64-bit time_t transition.
+
+ -- Steve Langasek <vorlon@debian.org> Fri, 02 Feb 2024 18:18:10 +0000
+
libverto (0.3.1-1) unstable; urgency=medium

[ Debian Janitor ]
diff -Nru libverto-0.3.1/debian/control libverto-0.3.1/debian/control
--- libverto-0.3.1/debian/control 2020-06-08 13:34:34.000000000 +0000
+++ libverto-0.3.1/debian/control 2024-02-02 18:18:10.000000000 +0000
@@ -12,7 +12,7 @@
Package: libverto-dev
Section: libdevel
Architecture: any
-Depends: ${misc:Depends}, libverto1 (= ${binary:Version}), libverto-glib1 (= ${binary:Version}), libverto-libev1 (= ${binary:Version})
+Depends: ${misc:Depends}, libverto1t64 (= ${binary:Version}), libverto-glib1t64 (= ${binary:Version}), libverto-libev1t64 (= ${binary:Vers

This is a multi-part message in MIME format...

Your message dated Wed, 28 Feb 2024 23:47:20 +0000
with message-id <E1rfTdw-008YxB-1S@fasolo.debian.org>
and subject line Bug#1062696: fixed in libverto 0.3.1-1.1
has caused the Debian Bug report #1062696,
regarding libverto: NMU diff for 64-bit time_t transition
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


--
1062696: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1062696
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

Received: (at submit) by bugs.debian.org; 2 Feb 2024 18:18:43 +0000 X-Spam-Checker-Version: SpamAssassin 3.4.6-bugs.debian.org_2005_01_02
(2021-04-09) on buxtehude.debian.org
X-Spam-Level:
X-Spam-Status: No, score=-112.0 required=4.0 tests=BAYES_00,DKIMWL_WL_HIGH,
DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,FOURLA,FROMDEVELOPER,
HEADER_FROM_DIFFERENT_DOMAINS,SPF_HELO_NONE,SPF_NONE,
T_SCC_BODY_TEXT_LINE,USER_IN_DKIM_WELCOMELIST,USER_IN_DKIM_WHITELIST,
XMAILER_REPORTBUG autolearn=ham autolearn_force=no
version=3.4.6-bugs.debian.org_2005_01_02
X-Spam-Bayes: score:0.0000 Tokens: new, 116; hammy, 150; neutral, 279; spammy,
0. spammytokens: hammytokens:0.000-+--sk:taint_o, 0.000-+--sk:TAINT_O,
0.000-+--trixie, 0.000-+--langasek, 0.000-+--Langasek
Return-path: <vorlon@homer.dodds.net>
Received: from becquer.dodds.net ([2001:470:e980::2]:37979)
by buxtehu

--Th5ktxFk6x0SE1WY
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

An overlooked hard-coded dependency in debian/control has made libverto uninstallable. Please find the debdiff for an updated NMU attached.

On Fri, Feb 02, 2024 at 06:18:40PM +0000, Steve Langasek wrote:

Source: libverto
Version: 0.3.1-1
Severity: serious
Tags: patch pending sid trixie
Justification: library ABI skew on upgrade
User: debian-arm@lists.debian.org
Usertags: time-t

NOTICE: these changes must not be uploaded to unstable yet!

Dear maintainer,

As part of the 64-bit time_t transition required to support 32-bit architectures in 2038 and beyond (https://wiki.debian.org/ReleaseGoals/64bit-time), we have identified libverto as a source package shipping runtime libraries whose ABI
either is affected by the change in size of time_t, or could not be
analyzed via abi-compliance-checker (and therefore to be on the safe
side we assume is affected).

To ensure that inconsistent combinations of libraries with their reverse-dependencies are never installed together, it is necessary to
have a library transition, which is most easily done by renaming the
runtime library package.

Since turning on 64-bit time_t is being handled centrally through a change
to the default dpkg-buildflags (https://bugs.debian.org/1037136), it is important that libraries affected by this ABI change all be uploaded close together in time. Therefore I have prepared a 0-day NMU for libverto
which will initially be uploaded to experimental if possible, then to unstable after packages have cleared binary NEW.

Please find the patch for this NMU attached.

If you have any concerns about this patch, please reach out ASAP. Although this package will be uploaded to experimental immediately, there will be a period of several days before we begin uploads to unstable; so if information becomes available that your package should not be included in the transition, there is time for us to amend the planned uploads.

-- System Information:
Debian Release: trixie/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 6.5.0-14-generic (SMP w/12 CPU threads; PREEMPT)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE
Locale: LANG=C, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)

diff -Nru libverto-0.3.1/debian/changelog libverto-0.3.1/debian/changelog
--- libverto-0.3.1/debian/changelog 2020-06-08 13:37:48.000000000 +0000
+++ libverto-0.3.1/debian/changelog 2024-02-02 18:18:10.000000000 +0000
@@ -1,3 +1,10 @@
+libverto (0.3.1-1.1) experimental; urgency=medium
+
+ * Non-maintainer upload.
+ * Rename libraries for 64-bit time_t transition.
+
+ -- Steve Langasek <vorlon@debian.org> Fri, 02 Feb 2024 18:18:10 +0000
+
libverto (0.3.1-1) unstable; urgency=medium

[ Debian Janitor ]
diff -Nru libverto-0.3.1/debian/control libverto-0.3.1/debian/control
--- libverto-0.3.1/debian/control 2020-06-08 13:34:34.000000000 +0000
+++ libverto-0.3.1/debian/control 2024-02-02 18:18:10.000000000 +0000
@@ -12,7 +12,7 @@
Package: libverto-dev
Section: libdevel
Architecture: any
-Depends: ${misc:Depends}, libverto1 (= ${binary:Version}), libverto-glib1 (= ${binary:Version}), libverto-libev1 (= ${binary:Version})
+Depends: ${misc:Depends}, libverto1t64 (= ${binary:Version}), libverto-glib1t64 (= ${binary:Version}), libverto-libev1t64 (= ${binary:Version})
Description: Event loop abstraction for Libraries - Development
Libverto exists to isolate libraries from the particular event loop
chosen by an application. Libverto provides an asynchronous
@@ -22,7 +22,10 @@
.
This package includes development libraries.

-Package: libverto1
+Package: libverto1t64
+Provides: ${t64:Provides}
+Replaces: libverto1
+Breaks: libverto1 (<< ${source:Version})
Section: libs
Architecture: any
PRe-Depends: ${misc:Pre-Depends}
@@ -37,7 +40,10 @@
.
This package includes the main runtime library.

-Package: libverto-libev1
+Package: libverto-libev1t64
+Provides: ${t64:Provides}
+Replaces: libverto-libev1
+Breaks: libverto-libev1 (<< ${source:Version})
Section: libs
Architecture: any
PRe-Depends: ${misc:Pre-Depends}
@@ -52,7 +58,10 @@
.
This package includes support for the libev event loop.

-Package: libverto-glib1
+Package: libverto-glib1t64
+Provides: ${t64:Provides}
+Replaces: libverto-glib1
+Breaks: libverto-glib1 (<< ${source:Version})
Section: libs
Architecture: any
PRe-Depends: ${misc:Pre-Depends}
diff -Nru libverto-0.3.1/debian/libverto-glib1.install libverto-0.3.1/debian/libverto-glib1.install
--- libverto-0.3.1/debian/libverto-glib1.install 2014-05-29 00:36:01.000000000 +0000
+++ libverto-0.3.1/debian/libverto-glib1.install 1970-01-01 00:00:00.000000000 +0000
@@ -1 +0,0 @@
-usr/lib/*/libverto-glib.so.*
diff -Nru libverto-0.3.1/debian/libverto-glib1t64.install libverto-0.3.1/debian/libverto-glib1t64.install
--- libverto-0.3.1/debian/libverto-glib1t64.install 1970-01-01 00:00:00.000000000 +0000
+++ libverto-0.3.1/debian/libverto-glib1t64.install 2014-05-29 00:36:01.000000000 +0000
@@ -0,0 +1 @@
+usr/lib/*/libverto-glib.so.*
diff -Nru libverto-0.3.1/debian/libverto-glib1t64.lintian-overrides libverto-0.3.1/debian/libverto-glib1t64.lintian-overrides
--- libverto-0.3.1/debian/libverto-glib1t64.lintian-overrides 1970-01-01 00:00:00.000000000 +0000
+++ libverto-0.3.1/debian/libverto-glib1t64.lintian-overrides 2024-02-02 18:18:10.000000000 +0000
@@ -0,0 +1 @@
+libverto-glib1t64: package-name-doesnt-match-sonames libverto-glib1
diff -Nru libverto-0.3.1/debian/libverto-libev1.install libverto-0.3.1/debian/libverto-libev1.install
--- libverto-0.3.1/debian/libverto-libev1.install 2014-05-29 00:36:01.000000000 +0000
+++ libverto-0.3.1/debian/libverto-libev1.install 1970-01-01 00:00:00.000000000 +0000
@@ -1 +0,0 @@
-usr/lib/*/libverto-libev.so.*
diff -Nru libverto-0.3.1/debian/libverto-libev1t64.install libverto-0.3.1/debian/libverto-libev1t64.install
--- libverto-0.3.1/debian/libverto-libev1t64.install 1970-01-01 00:00:00.000000000 +0000
+++ libverto-0.3.1/debian/libverto-libev1t64.install 2014-05-29 00:36:01.000000000 +0000
@@ -0,0 +1 @@
+usr/lib/*/libverto-libev.so.*
diff -Nru libverto-0.3.1/debian/libverto-libev1t64.lintian-overrides libverto-0.3.1/debian/libverto-libev1t64.lintian-overrides
--- libverto-0.3.1/debian/libverto-libev1t64.lintian-overrides 1970-01-01 00:00:00.000000000 +0000
+++ libverto-0.3.1/debian/libverto-libev1t64.lintian-overrides 2024-02-02 18:18:10.000000000 +0000
@@ -0,0 +1 @@
+libverto-libev1t64: package-name-doesnt-match-sonames libverto-libev1
diff -Nru libverto-0.3.1/debian/libverto1.dirs libverto-0.3.1/debian/libverto1.dirs
--- libverto-0.3.1/debian/libverto1.dirs 2014-05-29 00:36:01.000000000 +0000
+++ libverto-0.3.1/debian/libverto1.dirs 1970-01-01 00:00:00.000000000 +0000
@@ -1 +0,0 @@
-usr/lib
diff -Nru libverto-0.3.1/debian/libverto1.install libverto-0.3.1/debian/libverto1.install
--- libverto-0.3.1/debian/libverto1.install 2014-05-29 00:36:01.000000000 +0000
+++ libverto-0.3.1/debian/libverto1.install 1970-01-01 00:00:00.000000000 +0000
@@ -1,2 +0,0 @@
-usr/lib/*/libverto.so.*
-
diff -Nru libverto-0.3.1/debian/libverto1.symbols libverto-0.3.1/debian/libverto1.symbols
--- libverto-0.3.1/debian/libverto1.symbols 2019-02-26 14:59:18.000000000 +0000
+++ libverto-0.3.1/debian/libverto1.symbols 1970-01-01 00:00:00.000000000 +0000
@@ -1,34 +0,0 @@
-libverto.so.1 libverto1 #MINVER#
- verto_add_child@Base 0.2.2
- verto_add_idle@Base 0.2.2
- verto_add_io@Base 0.2.2
- verto_add_signal@Base 0.2.2
- verto_add_timeout@Base 0.2.2
- verto_break@Base 0.2.2
- verto_cleanup@Base 0.3.0
- verto_convert_module@Base 0.2.2
- verto_default@Base 0.2.4
- verto_del@Base 0.2.2
- verto_fire@Base 0.2.4
- verto_free@Base 0.2.2
- verto_get_ctx@Base 0.2.2
- verto_get_fd@Base 0.2.2
- verto_get_fd_state@Base 0.2.2
- verto_get_flags@Base 0.2.2
- verto_get_interval@Base 0.2.2
- verto_get_private@Base 0.2.2
- verto_get_proc@Base 0.2.2
- verto_get_proc_status@Base 0.2.2
- verto_get_signal@Base 0.2.2
- verto_get_supported_types@Base 0.2.2
- verto_get_type@Base 0.2.2
- verto_new@Base 0.2.2
- verto_reinitialize@Base 0.2.2
- verto_run@Base 0.2.2
- verto_run_once@Base 0.2.2
- verto_set_allocator@Base 0.2.2
- verto_set_default@Base 0.2.2
- verto_set_fd_state@Base 0.2.2
- verto_set_flags@Base 0.2.4
- verto_set_private@Base 0.2.2
- verto_set_proc_status@Base 0.2.2
diff -Nru libverto-0.3.1/debian/libverto1t64.dirs libverto-0.3.1/debian/libverto1t64.dirs
--- libverto-0.3.1/debian/libverto1t64.dirs 1970-01-01 00:00:00.000000000 +0000
+++ libverto-0.3.1/debian/libverto1t64.dirs 2014-05-29 00:36:01.000000000 +0000
@@ -0,0 +1 @@
+usr/lib
diff -Nru libverto-0.3.1/debian/libverto1t64.install libverto-0.3.1/debian/libverto1t64.install
--- libverto-0.3.1/debian/libverto1t64.install 1970-01-01 00:00:00.000000000 +0000
+++ libverto-0.3.1/debian/libverto1t64.install 2014-05-29 00:36:01.000000000 +0000
@@ -0,0 +1,2 @@
+usr/lib/*/libverto.so.*
+
diff -Nru libverto-0.3.1/debian/libverto1t64.lintian-overrides libverto-0.3.1/debian/libverto1t64.lintian-overrides
--- libverto-0.3.1/debian/libverto1t64.lintian-overrides 1970-01-01 00:00:00.000000000 +0000
+++ libverto-0.3.1/debian/libverto1t64.lintian-overrides 2024-02-02 18:18:10.000000000 +0000
@@ -0,0 +1 @@
+libverto1t64: package-name-doesnt-match-sonames libverto1
diff -Nru libverto-0.3.1/debian/libverto1t64.symbols libverto-0.3.1/debian/libverto1t64.symbols
--- libverto-0.3.1/debian/libverto1t64.symbols 1970-01-01 00:00:00.000000000 +0000
+++ libverto-0.3.1/debian/libverto1t64.symbols 2024-02-02 18:18:10.000000000 +0000
@@ -0,0 +1,34 @@
+libverto.so.1 libverto1t64 #MINVER#
+ verto_add_child@Base 0.2.2
+ verto_add_idle@Base 0.2.2
+ verto_add_io@Base 0.2.2
+ verto_add_signal@Base 0.2.2
+ verto_add_timeout@Base 0.2.2
+ verto_break@Base 0.2.2
+ verto_cleanup@Base 0.3.0
+ verto_convert_module@Base 0.2.2
+ verto_default@Base 0.2.4
+ verto_del@Base 0.2.2
+ verto_fire@Base 0.2.4
+ verto_free@Base 0.2.2
+ verto_get_ctx@Base 0.2.2
+ verto_get_fd@Base 0.2.2
+ verto_get_fd_state@Base 0.2.2
+ verto_get_flags@Base 0.2.2
+ verto_get_interval@Base 0.2.2
+ verto_get_private@Base 0.2.2
+ verto_get_proc@Base 0.2.2
+ verto_get_proc_status@Base 0.2.2
+ verto_get_signal@Base 0.2.2
+ verto_get_supported_types@Base 0.2.2
+ verto_get_type@Base 0.2.2
+ verto_new@Base 0.2.2
+ verto_reinitialize@Base 0.2.2
+ verto_run@Base 0.2.2
+ verto_run_once@Base 0.2.2
+ verto_set_allocator@Base 0.2.2
+ verto_set_default@Base 0.2.2
+ verto_set_fd_state@Base 0.2.2
+ verto_set_flags@Base 0.2.4
+ verto_set_private@Base 0.2.2
+ verto_set_proc_status@Base 0.2.2

--
Steve Langasek Give me a lever long enough and a Free OS Debian Developer to set it on, and I can move the world. Ubuntu Developer https://www.debian.org/ slangasek@ubuntu.com vorlon@debian.org

--Th5ktxFk6x0SE1WY
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="nmu_libverto.debdiff" Content-Transfer-Encoding: quoted-printable

diff -Nru libverto-0.3.1/debian/changelog libverto-0.3.1/debian/changelog
--- libverto-0.3.1/debian/changelog 2020-06-08 13:37:48.000000000 +0000
+++ libverto-0.3.1/debian/changelog 2024-03-04 03:22:10.000000000 +0000
@@ -1,3 +1,17 @@
+libverto (0.3.1-1.2) unstable; urgency=medium
+
+ * Non-maintainer upload.
+ * Fix hard-coded dep on libverto-ev1|libverto-glib1.
+
+ -- Steve Langasek <vorlon@debian.org> Mon, 04 Mar 2024 03:22:10 +0000
+
+libverto (0.3.1-1.1) unstable; urgency=medium
+
+ * Non-maintainer upload.