• webcam and Inspiron 15R N5110 (2/3)

    From Mohsen Pahlevanzadeh@21:1/5 to All on Fri Apr 10 04:00:02 2020
    [continued from previous message]

    [ 0.485747] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
    [ 0.485754] pci 0000:00:1c.1: bridge window [mem 0xf3200000-0xf32fffff 64bit pref]
    [ 0.485761] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
    [ 0.485766] pci 0000:00:1c.3: bridge window [mem 0xf7a00000-0xf7afffff]
    [ 0.485775] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
    [ 0.485780] pci 0000:00:1c.4: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.485789] pci 0000:00:1c.7: PCI bridge to [bus 11-1f]
    [ 0.485792] pci 0000:00:1c.7: bridge window [io 0xb000-0xcfff]
    [ 0.485797] pci 0000:00:1c.7: bridge window [mem 0xf6800000-0xf78fffff]
    [ 0.485801] pci 0000:00:1c.7: bridge window [mem 0xf2100000-0xf31fffff 64bit pref]
    [ 0.485809] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
    [ 0.485810] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
    [ 0.485812] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
    [ 0.485813] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
    [ 0.485814] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
    [ 0.485816] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
    [ 0.485817] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.485818] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.485820] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.485821] pci_bus 0000:00: resource 13 [mem 0xcfa00000-0xfeafffff window] [ 0.485822] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.485824] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.485825] pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf60fffff]
    [ 0.485827] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.485828] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
    [ 0.485830] pci_bus 0000:05: resource 2 [mem 0xf3200000-0xf32fffff 64bit pref]
    [ 0.485831] pci_bus 0000:09: resource 1 [mem 0xf7a00000-0xf7afffff]
    [ 0.485833] pci_bus 0000:0b: resource 1 [mem 0xf7900000-0xf79fffff]
    [ 0.485834] pci_bus 0000:11: resource 0 [io 0xb000-0xcfff]
    [ 0.485835] pci_bus 0000:11: resource 1 [mem 0xf6800000-0xf78fffff]
    [ 0.485836] pci_bus 0000:11: resource 2 [mem 0xf2100000-0xf31fffff 64bit pref]
    [ 0.485947] NET: Registered protocol family 2
    [ 0.486108] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
    [ 0.486125] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
    [ 0.486239] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
    [ 0.486388] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.486427] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
    [ 0.486453] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
    [ 0.486549] NET: Registered protocol family 1
    [ 0.486554] NET: Registered protocol family 44
    [ 0.486568] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
    [ 0.609876] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x645 took 120406 usecs
    [ 0.733864] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x645 took 121054 usecs
    [ 0.733896] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
    [ 0.734117] PCI: CLS 64 bytes, default 64
    [ 0.734164] Trying to unpack rootfs image as initramfs...
    [ 1.597950] Freeing initrd memory: 42360K
    [ 1.597969] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.597971] software IO TLB: mapped [mem 0xc64e1000-0xca4e1000] (64MB)
    [ 1.598576] Initialise system trusted keyrings
    [ 1.598589] Key type blacklist registered
    [ 1.598639] workingset: timestamp_bits=40 max_order=21 bucket_order=0
    [ 1.600177] zbud: loaded
    [ 1.600377] Platform Keyring initialized
    [ 1.600379] Key type asymmetric registered
    [ 1.600381] Asymmetric key parser 'x509' registered
    [ 1.600389] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
    [ 1.600438] io scheduler mq-deadline registered
    [ 1.600750] pcieport 0000:00:01.0: PME: Signaling with IRQ 24
    [ 1.600953] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
    [ 1.601173] pcieport 0000:00:1c.1: PME: Signaling with IRQ 26
    [ 1.601386] pcieport 0000:00:1c.3: PME: Signaling with IRQ 27
    [ 1.601511] pcieport 0000:00:1c.4: PME: Signaling with IRQ 28
    [ 1.601854] pcieport 0000:00:1c.7: PME: Signaling with IRQ 29
    [ 1.601887] pcieport 0000:00:1c.7: pciehp: Slot #7 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
    [ 1.602039] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 1.602054] intel_idle: MWAIT substates: 0x21120
    [ 1.602055] intel_idle: v0.4.1 model 0x2A
    [ 1.602464] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 1.616794] thermal LNXTHERM:00: registered as thermal_zone0
    [ 1.616796] ACPI: Thermal Zone [THM] (72 C)
    [ 1.616958] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [ 1.617613] Linux agpgart interface v0.103
    [ 1.617698] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
    [ 1.617699] AMD-Vi: AMD IOMMUv2 functionality not available on this system
    [ 1.618343] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
    [ 1.621043] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.621049] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.621195] mousedev: PS/2 mouse device common for all mice
    [ 1.621234] rtc_cmos 00:01: RTC can wake from S4
    [ 1.621449] rtc_cmos 00:01: registered as rtc0
    [ 1.621469] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.621481] intel_pstate: Intel P-state driver initializing
    [ 1.622183] ledtrig-cpu: registered to indicate activity on CPUs
    [ 1.622762] drop_monitor: Initializing network drop monitor service
    [ 1.623275] NET: Registered protocol family 10
    [ 1.637559] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.650287] Segment Routing with IPv6
    [ 1.650346] mip6: Mobile IPv6
    [ 1.650351] NET: Registered protocol family 17
    [ 1.650621] mpls_gso: MPLS GSO support
    [ 1.652139] microcode: sig=0x206a7, pf=0x10, revision=0x1b
    [ 1.652589] microcode: Microcode Update Driver: v2.2.
    [ 1.652598] IPI shorthand broadcast: enabled
    [ 1.652617] sched_clock: Marking stable (1649948885, 2007257)->(1676354510, -24398368)
    [ 1.653008] registered taskstats version 1
    [ 1.653012] Loading compiled-in X.509 certificates
    [ 1.653065] zswap: loaded using pool lzo/zbud
    [ 1.653498] Key type ._fscrypt registered
    [ 1.653501] Key type .fscrypt registered
    [ 1.653502] Key type fscrypt-provisioning registered
    [ 1.653543] AppArmor: AppArmor sha1 policy hashing enabled
    [ 1.654909] rtc_cmos 00:01: setting system clock to 2020-04-10T00:58:21 UTC (1586480301)
    [ 1.657852] Freeing unused kernel image (initmem) memory: 1608K
    [ 1.701781] Write protecting the kernel read-only data: 16384k
    [ 1.703170] Freeing unused kernel image (text/rodata gap) memory: 2044K
    [ 1.703476] Freeing unused kernel image (rodata/data gap) memory: 180K
    [ 1.744600] x86/mm: Checked W+X mappings: passed, no W+X pages found.
    [ 1.744601] x86/mm: Checking user space page tables
    [ 1.776481] x86/mm: Checked W+X mappings: passed, no W+X pages found.
    [ 1.776483] Run /init as init process
    [ 1.776484] with arguments:
    [ 1.776485] /init
    [ 1.776485] with environment:
    [ 1.776486] HOME=/
    [ 1.776486] TERM=linux
    [ 1.776487] BOOT_IMAGE=/boot/vmlinuz-5.6.3
    [ 1.902530] button: module verification failed: signature and/or required key missing - tainting kernel
    [ 1.902849] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
    [ 1.902907] ACPI: Lid Switch [LID0]
    [ 1.902972] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
    [ 1.902999] ACPI: Power Button [PWRB]
    [ 1.903057] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
    [ 1.903075] ACPI: Sleep Button [SBTN]
    [ 1.903135] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 1.903183] ACPI: Power Button [PWRF]
    [ 1.904813] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
    [ 1.918187] ACPI: bus type USB registered
    [ 1.918212] usbcore: registered new interface driver usbfs
    [ 1.918224] usbcore: registered new interface driver hub
    [ 1.918265] usbcore: registered new device driver usb
    [ 1.924482] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.925599] SCSI subsystem initialized
    [ 1.927529] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
    [ 1.930044] ehci-pci: EHCI PCI platform driver
    [ 1.930139] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200110/utaddress-204)
    [ 1.930147] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.930156] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20200110/utaddress-204)
    [ 1.930160] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200110/utaddress-204)
    [ 1.930165] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.930171] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20200110/utaddress-204)
    [ 1.930174] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200110/utaddress-204)
    [ 1.930181] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.930343] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 1.930351] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.930365] ehci-pci 0000:00:1a.0: debug port 2
    [ 1.931313] cryptd: max_cpu_qlen set to 1000
    [ 1.932242] libata version 3.00 loaded.
    [ 1.933699] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20200110/utaddress-204)
    [ 1.933704] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200110/utaddress-204)
    [ 1.933711] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.933712] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 1.934276] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.934909] AVX version of gcm_enc/dec engaged.
    [ 1.934911] AES CTR mode by8 optimization enabled
    [ 1.935348] ahci 0000:00:1f.2: version 3.0
    [ 1.935581] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 1.937051] libphy: r8169: probed
    [ 1.937630] r8169 0000:05:00.0 eth0: RTL8105e, 18:03:73:60:b4:4e, XID 40a, IRQ 30
    [ 1.941721] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7b08000
    [ 1.945777] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
    [ 1.945782] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
    [ 1.948867] r8169 0000:05:00.0 enp5s0: renamed from eth0
    [ 1.954101] battery: ACPI: Battery Slot [BAT0] (battery present)
    [ 1.961703] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.961812] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
    [ 1.961814] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 1.961815] usb usb1: Product: EHCI Host Controller
    [ 1.961816] usb usb1: Manufacturer: Linux 5.6.3 ehci_hcd
    [ 1.961817] usb usb1: SerialNumber: 0000:00:1a.0
    [ 1.961963] hub 1-0:1.0: USB hub found
    [ 1.961971] hub 1-0:1.0: 2 ports detected
    [ 1.962103] xhci_hcd 0000:0b:00.0: xHCI Host Controller
    [ 1.962114] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 2
    [ 1.962259] xhci_hcd 0000:0b:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
    [ 1.962554] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
    [ 1.962555] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 1.962557] usb usb2: Product: xHCI Host Controller
    [ 1.962558] usb usb2: Manufacturer: Linux 5.6.3 xhci-hcd
    [ 1.962559] usb usb2: SerialNumber: 0000:0b:00.0
    [ 1.962672] hub 2-0:1.0: USB hub found
    [ 1.962687] hub 2-0:1.0: 2 ports detected
    [ 1.962843] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 1.962849] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
    [ 1.962862] ehci-pci 0000:00:1d.0: debug port 2
    [ 1.962882] xhci_hcd 0000:0b:00.0: xHCI Host Controller
    [ 1.962887] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 4
    [ 1.962892] xhci_hcd 0000:0b:00.0: Host supports USB 3.0 SuperSpeed
    [ 1.965726] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
    [ 1.965745] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
    [ 1.965746] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 1.965748] usb usb4: Product: xHCI Host Controller
    [ 1.965749] usb usb4: Manufacturer: Linux 5.6.3 xhci-hcd
    [ 1.965750] usb usb4: SerialNumber: 0000:0b:00.0
    [ 1.965860] hub 4-0:1.0: USB hub found
    [ 1.965874] hub 4-0:1.0: 2 ports detected
    [ 1.966771] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.966787] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7b07000
    [ 1.974411] scsi host0: ahci
    [ 1.974645] scsi host1: ahci
    [ 1.974786] scsi host2: ahci
    [ 1.974895] scsi host3: ahci
    [ 1.974999] scsi host4: ahci
    [ 1.975108] scsi host5: ahci
    [ 1.975163] ata1: SATA max UDMA/133 abar m2048@0xf7b06000 port 0xf7b06100 irq 31
    [ 1.975165] ata2: DUMMY
    [ 1.975165] ata3: DUMMY
    [ 1.975166] ata4: DUMMY
    [ 1.975168] ata5: SATA max UDMA/133 abar m2048@0xf7b06000 port 0xf7b06300 irq 31
    [ 1.975171] ata6: SATA max UDMA/133 abar m2048@0xf7b06000 port 0xf7b06380 irq 31
    [ 1.981707] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.981808] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
    [ 1.981810] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 1.981812] usb usb3: Product: EHCI Host Controller
    [ 1.981814] usb usb3: Manufacturer: Linux 5.6.3 ehci_hcd
    [ 1.981816] usb usb3: SerialNumber: 0000:00:1d.0
    [ 1.982084] hub 3-0:1.0: USB hub found
    [ 1.982096] hub 3-0:1.0: 2 ports detected
    [ 2.012548] i915 0000:00:02.0: vgaarb: deactivate vga console
    [ 2.012957] Console: switching to colour dummy device 80x25
    [ 2.013736] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 2.013737] [drm] Driver supports precise vblank timestamp query.
    [ 2.014297] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
    [ 2.030470] MXM: GUID detected in BIOS
    [ 2.030533] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200110/nsarguments-59)
    [ 2.030727] i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
    [ 2.030763] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200110/nsarguments-59)
    [ 2.030925] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
    [ 2.030930] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
    [ 2.030947] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
    [ 2.031066] nouveau 0000:01:00.0: NVIDIA GF108 (0c1a80a1)
    [ 2.034389] [drm] Initialized i915 1.6.0 20200114 for 0000:00:02.0 on minor 0
    [ 2.036374] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
    [ 2.071300] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 2.071414] nouveau 0000:01:00.0: bios: version 70.08.56.00.0a
    [ 2.072138] acpi device:1c: registered as cooling_device8
    [ 2.072195] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1a/LNXVIDEO:00/input/input7
    [ 2.073128] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 2.073640] acpi device:3b: registered as cooling_device9
    [ 2.073806] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
    [ 2.086090] fbcon: i915drmfb (fb0) is primary device
    [ 2.187738] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
    [ 2.247859] vga_switcheroo: enabled
    [ 2.248071] [TTM] Zone kernel: Available graphics memory: 2998318 KiB
    [ 2.248072] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
    [ 2.248073] [TTM] Initializing pool allocator
    [ 2.248079] [TTM] Initializing DMA pool allocator
    [ 2.248100] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
    [ 2.248102] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
    [ 2.248106] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
    [ 2.248107] nouveau 0000:01:00.0: DRM: DCB version 4.0
    [ 2.248110] nouveau 0000:01:00.0: DRM: DCB outp 00: 02011300 00000000
    [ 2.248112] nouveau 0000:01:00.0: DRM: DCB outp 01: 02022362 00020010
    [ 2.248114] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000040
    [ 2.248115] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
    [ 2.248116] nouveau 0000:01:00.0: DRM: DCB conn 02: 00001261
    [ 2.249038] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
    [ 2.249577] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 2.249577] [drm] Driver supports precise vblank timestamp query.
    [ 2.287111] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo (____ptrval____)
    [ 2.287991] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.291668] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 2.292025] ata1.00: ATA-8: WDC WD7500BPVT-75HXZT3, 01.01A01, max UDMA/133
    [ 2.292030] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.295819] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 2.296121] ata1.00: configured for UDMA/133
    [ 2.296519] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPVT-7 1A01 PQ: 0 ANSI: 5
    [ 2.297748] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.321800] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 2.326758] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
    [ 2.326763] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 2.327393] hub 1-1:1.0: USB hub found
    [ 2.327507] hub 1-1:1.0: 6 ports detected
    [ 2.350774] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
    [ 2.350779] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 2.351412] hub 3-1:1.0: USB hub found
    [ 2.351555] hub 3-1:1.0: 8 ports detected
    [ 2.613130] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.613768] tsc: Refined TSC clocksource calibration: 1995.466 MHz
    [ 2.613789] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3986e6ba568, max_idle_ns: 881590718426 ns
    [ 2.613861] clocksource: Switched to clocksource tsc
    [ 2.616367] ata5.00: ATAPI: PLDS DVD+/-RW DS-8A5SH, XD13, max UDMA/100
    [ 2.617750] ata5.00: configured for UDMA/100
    [ 2.625907] scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DS-8A5SH XD13 PQ: 0 ANSI: 5
    [ 2.972753] ata6: SATA link down (SStatus 0 SControl 300)
    [ 3.022642] Console: switching to colour frame buffer device 170x48
    [ 3.046653] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
    [ 3.047046] nouveau 0000:01:00.0: fb1: nouveaudrmfb frame buffer device
    [ 3.062554] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
    [ 3.073564] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
    [ 3.073567] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 3.073576] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.073577] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.073591] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.111417] random: fast init done
    [ 3.135612] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
    [ 3.172411] sda: sda1 sda2 < sda5 >
    [ 3.174020] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.228894] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 3.228901] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.258831] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [ 3.841683] raid6: sse2x4 gen() 13386 MB/s
    [ 3.909683] raid6: sse2x4 xor() 7469 MB/s
    [ 3.977683] raid6: sse2x2 gen() 14207 MB/s
    [ 4.045680] raid6: sse2x2 xor() 7894 MB/s
    [ 4.113684] raid6: sse2x1 gen() 11216 MB/s
    [ 4.181681] raid6: sse2x1 xor() 6392 MB/s
    [ 4.181682] raid6: using algorithm sse2x2 gen() 14207 MB/s
    [ 4.181683] raid6: .... xor() 7894 MB/s, rmw enabled
    [ 4.181684] raid6: using ssse3x2 recovery algorithm
    [ 4.182135] xor: automatically using best checksumming function avx
    [ 4.182508] async_tx: api initialized (async)
    [ 4.268915] Btrfs loaded, crc32c=crc32c-intel
    [ 4.446667] process '/usr/bin/fstype' started with executable stack
    [ 4.461515] PM: Image not found (code -22)
    [ 4.467602] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff]
    [ 4.467605] PM: hibernation: Marking nosave pages: [mem 0x0009d000-0x000fffff]
    [ 4.467609] PM: hibernation: Marking nosave pages: [mem 0x20000000-0x201fffff]
    [ 4.467623] PM: hibernation: Marking nosave pages: [mem 0x40000000-0x401fffff]
    [ 4.467638] PM: hibernation: Marking nosave pages: [mem 0xca4e1000-0xca523fff]
    [ 4.467641] PM: hibernation: Marking nosave pages: [mem 0xca793000-0xca966fff]
    [ 4.467653] PM: hibernation: Marking nosave pages: [mem 0xcaba7000-0xffffffff]
    [ 4.468953] PM: hibernation: Basic memory bitmaps created
    [ 4.470059] PM: hibernation: Basic memory bitmaps freed
    [ 4.473081] video LNXVIDEO:00: Restoring backlight state
    [ 4.473234] video LNXVIDEO:01: Restoring backlight state
    [ 4.754557] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 5.149360] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
    [ 6.472129] random: crng init done
    [ 7.423861] systemd[1]: Inserted module 'autofs4'
    [ 7.693170] systemd[1]: systemd 245.4-1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
    [ 7.710022] systemd[1]: Detected architecture x86-64.
    [ 7.739221] systemd[1]: Set hostname to <debian>.
    [ 8.150119] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
    [ 12.617747] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
    [ 13.918592] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly.
    [ 13.992679] systemd[1]: Created slice system-getty.slice.
    [ 13.993259] systemd[1]: Created slice system-modprobe.slice.
    [ 13.993806] systemd[1]: Created slice system-postgresql.slice.
    [ 13.994369] systemd[1]: Created slice User and Session Slice.
    [ 13.994472] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 13.994764] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 13.994849] systemd[1]: Reached target User and Group Name Lookups.
    [ 13.994869] systemd[1]: Reached target Remote File Systems.
    [ 13.994887] systemd[1]: Reached target Slices.
    [ 13.995046] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 13.995218] systemd[1]: Listening on LVM2 poll daemon socket.
    [ 14.021854] systemd[1]: Listening on Syslog Socket.
    [ 14.022254] systemd[1]: Listening on fsck to fsckd communication Socket.
    [ 14.022458] systemd[1]: Listening on initctl Compatibility Named Pipe.
    [ 14.022939] systemd[1]: Listening on Journal Audit Socket.
    [ 14.023204] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 14.023522] systemd[1]: Listening on Journal Socket.
    [ 14.023833] systemd[1]: Listening on udev Control Socket.
    [ 14.024028] systemd[1]: Listening on udev Kernel Socket.
    [ 14.027038] systemd[1]: Mounting Huge Pages File System...
    [ 14.028745] systemd[1]: Mounting POSIX Message Queue File System...
    [ 14.029841] systemd[1]: Mounting Kernel Debug File System...
    [ 14.030921] systemd[1]: Mounting Kernel Trace File System...
    [ 14.032016] systemd[1]: Starting Availability of block devices...
    [ 14.033215] systemd[1]: Starting Set the console keyboard layout...
    [ 14.034316] systemd[1]: Starting Create list of static device nodes for the current kernel...
    [ 14.035331] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
    [ 14.035371] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
    [ 14.036405] systemd[1]: Started Nameserver information manager.
    [ 14.036594] systemd[1]: Reached target Network (Pre).
    [ 14.178698] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
    [ 14.178810] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
    [ 14.183407] systemd[1]: Starting Journal Service...
    [ 14.258544] systemd[1]: Starting Load Kernel Modules...
    [ 14.259381] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 14.260280] systemd[1]: Starting udev Coldplug all Devices...
    [ 14.262328] systemd[1]: Finished Availability of block devices.
    [ 14.293276] systemd[1]: Mounted Huge Pages File System.
    [ 14.293436] systemd[1]: Mounted POSIX Message Queue File System.
    [ 14.293566] systemd[1]: Mounted Kernel Debug File System.
    [ 14.293707] systemd[1]: Mounted Kernel Trace File System.
    [ 14.435168] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
    [ 14.467785] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
    [ 14.470984] systemd[1]: Finished Remount Root and Kernel File Systems.
    [ 14.621311] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
    [ 14.621484] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
    [ 14.624128] systemd[1]: Starting Load/Save Random Seed...
    [ 14.626371] systemd[1]: Starting Create System Users...
    [ 14.627032] systemd[1]: Started Journal Service.
    [ 14.673080] systemd-journald[450]: Received client request to flush runtime journal.
    [ 15.270249] lp: driver loaded but no devices found
    [ 15.405334] ppdev: user-space parallel port driver
    [ 20.214219] audit: type=1400 audit(1586480320.054:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="postgresql_akonadi" pid=489 comm="apparmor_parser"
    [ 20.277008] audit: type=1400 audit(1586480320.114:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=486 comm="apparmor_parser"
    [ 20.292680] audit: type=1400 audit(1586480320.130:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd" pid=485 comm="apparmor_parser"
    [ 20.292690] audit: type=1400 audit(1586480320.130:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd//qemu_bridge_helper" pid=485 comm="apparmor_parser"
    [ 20.324147] audit: type=1400 audit(1586480320.162:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=482 comm="apparmor_parser"
    [ 20.324158] audit: type=1400 audit(1586480320.162:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=482 comm="apparmor_parser"
    [ 20.452319] audit: type=1400 audit(1586480320.290:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=492 comm="apparmor_parser"
    [ 20.594531] audit: type=1400 audit(1586480320.434:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=493 comm="apparmor_parser"
    [ 20.594535] audit: type=1400 audit(1586480320.434:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=493 comm="apparmor_parser"
    [ 20.594537] audit: type=1400 audit(1586480320.434:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=493 comm="apparmor_parser"
    [ 24.242667] ACPI: AC Adapter [AC] (on-line)
    [ 24.246891] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
    [ 24.246893] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
    [ 24.246893] RAPL PMU: hw unit of domain package 2^-16 Joules
    [ 24.246894] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
    [ 24.285182] input: PC Speaker as /devices/platform/pcspkr/input/input9
    [ 24.351865] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
    [ 24.398409] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
    [ 24.416801] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10
    [ 25.107496] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 25.107547] sr 4:0:0:0: Attached scsi generic sg1 type 5
    [ 25.468220] iTCO_vendor_support: vendor-support=0
    [ 25.633544] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 25.633641] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 25.634009] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 25.924448] cfg80211: Loading compiled-in X.509 certificates for regulatory database
    [ 25.973794] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
    [ 26.490610] Error: Driver 'pcspkr' is already registered, aborting...
    [ 26.731742] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops intel_plane_helper_funcs [i915])
    [ 26.848353] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD87B1/3: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
    [ 26.848359] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 26.848363] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
    [ 26.848366] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
    [ 26.848368] snd_hda_codec_idt hdaudioC0D0: inputs:
    [ 26.848373] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
    [ 26.848376] snd_hda_codec_idt hdaudioC0D0: Mic=0xa
    [ 26.890154] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 26.890231] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 26.890296] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 26.927171] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
    [ 27.283254] ath: phy0: ASPM enabled: 0x42
    [ 27.283257] ath: EEPROM regdomain: 0x60
    [ 27.283257] ath: EEPROM indicates we should expect a direct regpair map
    [ 27.283258] ath: Country alpha2 being used: 00
    [ 27.283259] ath: Regpair used: 0x60
    [ 27.284853] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'

    [continued in next message]

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)