Hi, I was going to see if the network installation image would work successfully to reinstall debian 11.00 with non-free firmware needed for my network cards. When I ran the installer at low priority so everything would work as expected and so I would have full control of the installation when
it got to the firmware loading it fails to load the firmware for any of my network cards when before on this same system in earlier versions of debian it worked just fine. Attached is the syslog from the installer. Can
someone please tell me what is going on with this installation image? Nick Gawronski
Feb 25 15:44:03 cdrom-detect: Detected CD 'Debian GNU/Linux 11.0.0 "Bullseye" - Unofficial amd64 NETINST with firmware 20210814-10:09'
Feb 25 15:44:04 cdrom-detect: Detected CD with 'stable' (bullseye) distribution
Feb 25 15:44:42 kernel: [ 87.728909] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, e8:03:9a:1e:91:3f, XID 2c9, IRQ 38
Feb 25 15:44:42 kernel: [ 87.728911] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
Feb 25 15:44:42 kernel: [ 87.734463] r8169 0000:03:00.0 enp3s0: renamed from eth0
Feb 25 15:44:42 kernel: [ 87.763346] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
Feb 25 15:44:42 kernel: [ 87.777430] Intel(R) Wireless WiFi driver for Linux
Feb 25 15:44:42 kernel: [ 87.777615] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
Feb 25 15:44:42 kernel: [ 87.777956] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-6000g2b-6.ucode (-2)
Feb 25 15:44:42 kernel: [ 87.777957] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
Feb 25 15:44:42 kernel: [ 87.777958] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000g2b-6.ucode failed with error -2
Feb 25 15:44:42 kernel: [ 87.777969] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-6000g2b-5.ucode (-2)
Feb 25 15:44:42 kernel: [ 87.777970] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000g2b-5.ucode failed with error -2
Feb 25 15:44:42 kernel: [ 87.777971] iwlwifi 0000:02:00.0: minimum version required: iwlwifi-6000g2b-5
Feb 25 15:44:42 kernel: [ 87.777972] iwlwifi 0000:02:00.0: maximum version supported: iwlwifi-6000g2b-6
Feb 25 15:44:42 kernel: [ 87.777973] iwlwifi 0000:02:00.0: check git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
Feb 25 15:44:56 kernel: [ 101.131549] platform regulatory.0: firmware: direct-loading firmware regulatory.db
Feb 25 15:44:56 kernel: [ 101.131561] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
Feb 25 15:44:56 kernel: [ 101.144553] Intel(R) Wireless WiFi driver for Linux
Feb 25 15:44:56 kernel: [ 101.144743] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
Feb 25 15:44:56 kernel: [ 101.145478] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-6000g2b-6.ucode (-2)
Feb 25 15:44:56 kernel: [ 101.145481] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000g2b-6.ucode failed with error -2
Feb 25 15:44:56 kernel: [ 101.145496] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-6000g2b-5.ucode (-2)
Feb 25 15:44:56 kernel: [ 101.145498] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000g2b-5.ucode failed with error -2
Feb 25 15:44:56 kernel: [ 101.145500] iwlwifi 0000:02:00.0: minimum version required: iwlwifi-6000g2b-5
Feb 25 15:44:56 kernel: [ 101.145502] iwlwifi 0000:02:00.0: maximum version supported: iwlwifi-6000g2b-6
Feb 25 15:44:56 kernel: [ 101.145503] iwlwifi 0000:02:00.0: check git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
Feb 25 15:44:57 check-missing-firmware: looking at dmesg again, restarting from timestamp: [ 87.777973]
Feb 25 15:44:57 check-missing-firmware: timestamp found, truncating dmesg accordingly
Feb 25 15:44:57 check-missing-firmware: saving timestamp for a later use: [ 101.145503]
Feb 25 15:44:57 check-missing-firmware: looking for firmware file iwlwifi-6000g2b-6.ucode requested by iwlwifi
Feb 25 15:44:57 check-missing-firmware: looking for firmware file iwlwifi-6000g2b-5.ucode requested by iwlwifi
Feb 25 15:44:57 check-missing-firmware: missing firmware files (iwlwifi-6000g2b-6.ucode iwlwifi-6000g2b-5.ucode) for iwlwifi
Feb 25 15:45:36 kernel: [ 141.144918] usb 3-1.2: USB disconnect, device number 3
Feb 25 15:45:36 kernel: [ 141.162899] sd 6:0:0:0: [sdc] Synchronizing SCSI cache
Feb 25 15:45:36 kernel: [ 141.162956] sd 6:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
Feb 25 15:47:44 init: starting pid 590, tty '/dev/tty2': '-/bin/sh'
Feb 25 15:48:09 kernel: [ 294.275973] EXT4-fs (sda1): recovery complete
Feb 25 15:48:09 kernel: [ 294.295831] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
On Wed, Sep 15, 2021 at 11:47:29AM -0500, Nick Gawronski wrote:
Feb 25 15:44:03 cdrom-detect: Detected CD 'Debian GNU/Linux 11.0.0 "Bullseye" - Unofficial amd64 NETINST with firmware 20210814-10:09'
Feb 25 15:44:04 cdrom-detect: Detected CD with 'stable' (bullseye) distribution
This is the official Debian media installer
Try the unofficial non-free CD : from the lines I've selected, it looks as
if you might be able to install via wired interface without loading firmware.
Feb 25 15:44:42 kernel: [ 87.777956] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-6000g2b-6.ucode (-2)
Feb 25 15:44:42 kernel: [ 87.777957] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
Feb 25 15:44:42 kernel: [ 87.777958] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000g2b-6.ucode failed with error -2
Feb 25 15:44:42 kernel: [ 87.777969] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-6000g2b-5.ucode (-2)
Feb 25 15:44:42 kernel: [ 87.777970] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000g2b-5.ucode failed with error -2
Feb 25 15:44:42 kernel: [ 87.777971] iwlwifi 0000:02:00.0: minimum version required: iwlwifi-6000g2b-5
Feb 25 15:44:42 kernel: [ 87.777972] iwlwifi 0000:02:00.0: maximum version supported: iwlwifi-6000g2b-6
Hi,
"Andrew M.A. Cater" <amacater@einval.com> wrote (Wed, 15 Sep 2021 17:25:52 +0000):
On Wed, Sep 15, 2021 at 11:47:29AM -0500, Nick Gawronski wrote:The lines you quoted above show, that Nick already used the unofficial image with firmware included.
Feb 25 15:44:03 cdrom-detect: Detected CD 'Debian GNU/Linux 11.0.0 "Bullseye" - Unofficial amd64 NETINST with firmware 20210814-10:09'This is the official Debian media installer
Feb 25 15:44:04 cdrom-detect: Detected CD with 'stable' (bullseye) distribution
Try the unofficial non-free CD : from the lines I've selected, it looks as >> if you might be able to install via wired interface without loading firmware.
I guess this lines are related:
Feb 25 15:44:42 kernel: [ 87.777956] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-6000g2b-6.ucode (-2)However, I have no clue what happens here...
Feb 25 15:44:42 kernel: [ 87.777957] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
Feb 25 15:44:42 kernel: [ 87.777958] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000g2b-6.ucode failed with error -2
Feb 25 15:44:42 kernel: [ 87.777969] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-6000g2b-5.ucode (-2)
Feb 25 15:44:42 kernel: [ 87.777970] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000g2b-5.ucode failed with error -2
Feb 25 15:44:42 kernel: [ 87.777971] iwlwifi 0000:02:00.0: minimum version required: iwlwifi-6000g2b-5
Feb 25 15:44:42 kernel: [ 87.777972] iwlwifi 0000:02:00.0: maximum version supported: iwlwifi-6000g2b-6
The iwlwifi-6000g2b-6.ucode file is included in firmware-iwlwifi package, so should also be available on the image in question.
Holger
Hi, Yes as I looked and it appears as if the firmware package is on the network installation image. This system has debian already installed on it is there a way I could send you the installation report from this system so you could take a look at it like where is it stored on the system? Nick Gawronski
Hi,
"Andrew M.A. Cater" <amacater@einval.com> wrote (Wed, 15 Sep 2021 17:25:52 +0000):
On Wed, Sep 15, 2021 at 11:47:29AM -0500, Nick Gawronski wrote:The lines you quoted above show, that Nick already used the unofficial image with firmware included.
Feb 25 15:44:03 cdrom-detect: Detected CD 'Debian GNU/Linux 11.0.0 "Bullseye" - Unofficial amd64 NETINST with firmware 20210814-10:09'This is the official Debian media installer
Feb 25 15:44:04 cdrom-detect: Detected CD with 'stable' (bullseye) distribution
Try the unofficial non-free CD : from the lines I've selected, it looks as >> if you might be able to install via wired interface without loading firmware.
I guess this lines are related:
Feb 25 15:44:42 kernel: [ 87.777956] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-6000g2b-6.ucode (-2)However, I have no clue what happens here...
Feb 25 15:44:42 kernel: [ 87.777957] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
Feb 25 15:44:42 kernel: [ 87.777958] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000g2b-6.ucode failed with error -2
Feb 25 15:44:42 kernel: [ 87.777969] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-6000g2b-5.ucode (-2)
Feb 25 15:44:42 kernel: [ 87.777970] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000g2b-5.ucode failed with error -2
Feb 25 15:44:42 kernel: [ 87.777971] iwlwifi 0000:02:00.0: minimum version required: iwlwifi-6000g2b-5
Feb 25 15:44:42 kernel: [ 87.777972] iwlwifi 0000:02:00.0: maximum version supported: iwlwifi-6000g2b-6
The iwlwifi-6000g2b-6.ucode file is included in firmware-iwlwifi package, so should also be available on the image in question.
Holger
Hi, I just tried this same process with the debian non-free DVD and educational versions with the same results. My system was installed
with an earlier version of debian-installer so where can I locate the installation report on my system as sending this to you might help?
Hi, Here is the syslog file from the working installed system. Possibly someone can look at it and find out what is different and why the newer installers are not loading the needed firmware. Nick Gawronski
From your "successful installation" syslog file, the relevant part for loading the firmware is this:
Sysop: | Keyop |
---|---|
Location: | Huddersfield, West Yorkshire, UK |
Users: | 296 |
Nodes: | 16 (2 / 14) |
Uptime: | 31:17:03 |
Calls: | 6,648 |
Calls today: | 3 |
Files: | 12,193 |
Messages: | 5,328,493 |