• Re: Porter roll call for Debian Bookworm

    From Manuel A. Fernandez Montecelo@21:1/5 to All on Thu Dec 30 14:10:01 2021
    Hello,

    2021-10-02 11:57 Graham Inggs:
    Hi

    We are doing a roll call for porters of all prospective release >architectures. If you are an active porter behind one of these
    architectures [1] and intend to continue for the development cycle of
    Debian Bookworm (est. release mid-2023), please respond with a signed
    email containing the following before Saturday, January 1, 2022:

    * Which architectures are you committing to be an active porter for?
    * Please describe recent relevant porter contributions.
    * Are you running/using Debian testing or sid on said port(s)?
    * Are you testing/patching d-i for the port(s)?

    Please note that no response is required for amd64 because our
    toolchain maintainers are happy to support amd64 as-is.

    Feel free to use the following template as your reply:
    [...]

    I have been working on the riscv64 port since 2015 or so, even if the successful and definitive initial bootstrap only happened in 2018. Some
    people joined from the start and more people joined lately, but I have a
    keen interest in pushing this port further :)

    Thus, I am an active porter for riscv64 and I intend to continue for the development cycle of Debian Bookworm (est. release mid-2023).

    In the last year or two the contributions were a bit diminished for a
    variety of issues (especially in the realm of attending bugs and looking
    at specific issues of packages and submitting patches), and will
    continue to be this way for a while, but I hope to pick-up pace again
    during this development cycle.


    For riscv64, I plan to:

    - maintain buildds

    --- I have set-up or was involved in getting hardware and necessary
    resources and setting up most of the buildds of the architecture so
    far, and I plan to continue doing this in the foreseeable future

    - maintain/provide hardware for (or assist with) automated tests on ci.d.n,
    jenkins.d.n (etc.)

    --- I though about doing do this in the past, I think that it's a good
    idea to do this if new suitable hardware becomes available, but
    there's been scarcity until now.

    - run a Debian testing or unstable system on port that I use regularly

    - test (most|all) packages on this architecture

    --- not sure if saying (most|all) is realistic with the current size of
    the archive, but I hope to use regularly the most important
    packages by using them on real systems.

    The following I will try to do as more time becomes available, and
    paying more attention if this port is considered to be supported for
    bookworm and becoming a more official architecture (but other people
    wit