I'm currently trying to get a Cyclades-Y multiserial card running
under NetBSD 7. Dmesg shows the card:
cy0 at pci4 dev 6 function 0: Cyclades-Y multiport serial
cy0: interrupting at ioapic0 pin 20
cy0: 8 channels (ttyCY000..ttyCY007)
In /etc/ttys they are defined (ttyCY000 to ttyCY007) like this:
ttyCY000 "/usr/libexec/getty std.9600" vt220 on
Anyhow, "ps -axuc | grep getty" shows a question mark instead of the
terminal line. Also, a connected hardware vt320 device doesn't show a
login prompt.
Any hint about what I've forgotten?
I'm currently trying to get a Cyclades-Y multiserial card running
under NetBSD 7. Dmesg shows the card:
cy0 at pci4 dev 6 function 0: Cyclades-Y multiport serial
cy0: interrupting at ioapic0 pin 20
cy0: 8 channels (ttyCY000..ttyCY007)
In /etc/ttys they are defined (ttyCY000 to ttyCY007) like this:
..
Any hint about what I've forgotten?
On 1/29/20 10:22 AM, eh41 wrote:
I'm currently trying to get a Cyclades-Y multiserial card running
under NetBSD 7. Dmesg shows the card:
cy0 at pci4 dev 6 function 0: Cyclades-Y multiport serial
cy0: interrupting at ioapic0 pin 20
cy0: 8 channels (ttyCY000..ttyCY007)
In /etc/ttys they are defined (ttyCY000 to ttyCY007) like this:
ttyCY000 "/usr/libexec/getty std.9600" vt220 on
Anyhow, "ps -axuc | grep getty" shows a question mark instead of the
terminal line. Also, a connected hardware vt320 device doesn't show a
login prompt.
Any hint about what I've forgotten?
You might want to re-post on one of the NetBSD mailing lists to get
better feedback; this news group is pretty dead unfortunately.
Sysop: | Keyop |
---|---|
Location: | Huddersfield, West Yorkshire, UK |
Users: | 296 |
Nodes: | 16 (2 / 14) |
Uptime: | 83:00:44 |
Calls: | 6,658 |
Calls today: | 4 |
Files: | 12,203 |
Messages: | 5,333,520 |
Posted today: | 1 |