In article <ru041v$2l99$
59@gallifrey.nk.ca>,
The Doctor <
doctor@doctor.nl2k.ab.ca> wrote:
Finally got a 4GB SAS drive to work with my system
Loaded FreeBSD 12.2 running nicely.
Except
1)
Openvpn
I am trying to set up an openvpn client.
It reaches the lan but chokes in www
when it tires to reach the outside world.
ftp work.
Huh?
The configuration is
client
dev tun
proto udp
remote server-ip 1194
nobind
#revolv-retry infinite
redirect-gateway def1
script-security 2
dhcp-option DNS ns1
dhcp-option DNS ns2
dhcp-option DNS 8.8.8.8
dhcp-option DOMAIN nk.ca
compress lz4-v2
persist-key
persist-tun
route 0.0.0.0 192.0.0.0 10.8.0.1
route 64.0.0.0 192.0.0.0 10.8.0.1
route 128.0.0.0 192.0.0.0 10.8.0.1
route 192.0.0.0 192.0.0.0 10.8.0.1
mute-replay-warnings
#auth-user-pass
remote-cert-tls server
cipher AES-256-CBC
auth SHA512
verb 9
mute 5
<ca>
CA CERT
</ca>
<cert>
CERT
</cert>
<key>
KEY
</key>
<tls-crypt>
CRYPT
</tls-crypt>
I used this in a Win10 client no problem.
Still just stops at the gateway.
2 ) Xwindows
Either not finding my screen or card
hostb0@pci0:0:0:0: class=0x060000 card=0x080415d9 chip=0x0c088086 >rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
device = 'Xeon E3-1200 v3 Processor DRAM Controller'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x080415d9 chip=0x0c018086 >rev=0x06 hdr=0x01
vendor = 'Intel Corporation'
device = 'Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16
Controller'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:1:1: class=0x060400 card=0x080415d9 chip=0x0c058086 >rev=0x06 hdr=0x01
vendor = 'Intel Corporation'
device = 'Xeon E3-1200 v3/4th Gen Core Processor PCI Express x8
Controller'
class = bridge
subclass = PCI-PCI
xhci0@pci0:0:20:0: class=0x0c0330 card=0x080415d9 chip=0x8c318086 >rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family USB xHCI'
class = serial bus
subclass = USB
ehci0@pci0:0:26:0: class=0x0c0320 card=0x080415d9 chip=0x8c2d8086 >rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family USB EHCI'
class = serial bus
subclass = USB
pcib3@pci0:0:28:0: class=0x060400 card=0x080415d9 chip=0x8c108086 >rev=0xd5 hdr=0x01
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family PCI Express Root Port'
class = bridge
subclass = PCI-PCI
pcib5@pci0:0:28:2: class=0x060400 card=0x080415d9 chip=0x8c148086 >rev=0xd5 hdr=0x01
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family PCI Express Root Port'
class = bridge
subclass = PCI-PCI
pcib6@pci0:0:28:3: class=0x060400 card=0x080415d9 chip=0x8c168086 >rev=0xd5 hdr=0x01
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family PCI Express Root Port'
class = bridge
subclass = PCI-PCI
ehci1@pci0:0:29:0: class=0x0c0320 card=0x080415d9 chip=0x8c268086 >rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family USB EHCI'
class = serial bus
subclass = USB
isab0@pci0:0:31:0: class=0x060100 card=0x080415d9 chip=0x8c528086 >rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'C222 Series Chipset Family Server Essential SKU LPC
Controller'
class = bridge
subclass = PCI-ISA
ahci0@pci0:0:31:2: class=0x010601 card=0x080415d9 chip=0x8c028086 >rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family 6-port SATA
Controller 1 [AHCI mode]'
class = mass storage
subclass = SATA
none0@pci0:0:31:3: class=0x0c0500 card=0x080415d9 chip=0x8c228086 >rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family SMBus Controller'
class = serial bus
subclass = SMBus
none1@pci0:0:31:6: class=0x118000 card=0x080415d9 chip=0x8c248086 >rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series Chipset Family Thermal Management Controller'
class = dasp
vgapci0@pci0:1:0:0: class=0x030000 card=0x22f71458 chip=0x67df1002 >rev=0xef hdr=0x00
vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]'
device = 'Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]'
class = display
subclass = VGA
hdac0@pci0:1:0:1: class=0x040300 card=0xaaf01458 chip=0xaaf01002 >rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]'
device = 'Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]'
class = multimedia
subclass = HDA
mps0@pci0:2:0:0: class=0x010700 card=0x069115d9 chip=0x00861000 rev=0x05 >hdr=0x00
vendor = 'Broadcom / LSI'
device = 'SAS2308 PCI-Express Fusion-MPT SAS-2'
class = mass storage
subclass = SAS
pcib4@pci0:3:0:0: class=0x060400 card=0x080415d9 chip=0x11501a03 >rev=0x03 hdr=0x01
vendor = 'ASPEED Technology, Inc.'
device = 'AST1150 PCI-to-PCI Bridge'
class = bridge
subclass = PCI-PCI
vgapci1@pci0:4:0:0: class=0x030000 card=0x080415d9 chip=0x20001a03 >rev=0x30 hdr=0x00
vendor = 'ASPEED Technology, Inc.'
device = 'ASPEED Graphics Family'
class = display
subclass = VGA
igb0@pci0:5:0:0: class=0x020000 card=0x153315d9 chip=0x15338086 rev=0x03 >hdr=0x00
vendor = 'Intel Corporation'
device = 'I210 Gigabit Network Connection'
class = network
subclass = ethernet
igb1@pci0:6:0:0: class=0x020000 card=0x153315d9 chip=0x15338086 rev=0x03 >hdr=0x00
vendor = 'Intel Corporation'
device = 'I210 Gigabit Network Connection'
class = network
subclass = ethernet
DCHP works, but why is X-Windows refusing to run?
More stuff
[ 1060.793]
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[ 1060.793] Build Operating System: FreeBSD 12.2-RELEASE-p2 amd64
[ 1060.793] Current Operating System: FreeBSD homebox 12.2-RELEASE-p2 FreeBSD 12.2-RELEASE-p2 GENERIC amd64
[ 1060.794] Build Date: 16 January 2021 01:56:15PM
[ 1060.794]
[ 1060.794] Current version of pixman: 0.40.0
[ 1060.794] Before reporting problems, check
http://wiki.x.org
to make sure that you have the latest version.
[ 1060.794] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1060.794] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 17 22:21:06 2021
[ 1060.794] (==) Using config directory: "/usr/local/etc/X11/xorg.conf.d"
[ 1060.794] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[ 1060.794] (==) No Layout section. Using the first Screen section.
[ 1060.794] (==) No screen section available. Using defaults.
[ 1060.794] (**) |-->Screen "Default Screen Section" (0)
[ 1060.794] (**) | |-->Monitor "<default monitor>"
[ 1060.794] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1060.794] (**) | |-->Device "Card0"
[ 1060.794] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1060.794] (==) Automatically adding devices
[ 1060.794] (==) Automatically enabling devices
[ 1060.794] (==) Not automatically adding GPU devices
[ 1060.794] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 1060.794] (==) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/,
catalogue:/usr/local/etc/X11/fontpath.d
[ 1060.794] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[ 1060.794] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1060.794] (II) Loader magic: 0x434a80
[ 1060.794] (II) Module ABI versions:
[ 1060.794] X.Org ANSI C Emulation: 0.4
[ 1060.794] X.Org Video Driver: 24.1
[ 1060.794] X.Org XInput driver : 24.1
[ 1060.794] X.Org Server Extension : 10.0
[ 1060.794] (!!) More than one possible primary device found
[ 1060.794] (--) PCI: (1@0:0:0) 1002:67df:1458:22f7 rev 239, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xf7500000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/65536
[ 1060.794] (--) PCI: (4@0:0:0) 1a03:2000:15d9:0804 rev 48, Mem @ 0xf6000000/16777216, 0xf7000000/131072, I/O @ 0x0000c000/128, BIOS @ 0x????????/65536
[ 1060.795] (II) LoadModule: "glx"
[ 1060.795] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 1060.796] (II) Module glx: vendor="X.Org Foundation"
[ 1060.796] compiled for 1.20.9, module version = 1.0.0
[ 1060.796] ABI class: X.Org Server Extension, version 10.0
[ 1060.796] (II) LoadModule: "amdgpu"
[ 1060.796] (II) Loading /usr/local/lib/xorg/modules/drivers/amdgpu_drv.so
[ 1060.817] (II) Module amdgpu: vendor="X.Org Foundation"
[ 1060.817] compiled for 1.20.9, module version = 19.1.0
[ 1060.817] Module class: X.Org Video Driver
[ 1060.817] ABI class: X.Org Video Driver, version 24.1
[ 1060.817] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 1060.817] (--) Using syscons driver with X support (version 2.0)
[ 1060.817] (--) using VT number 9
[ 1061.173] (EE) No devices detected.
[ 1061.173] (EE)
Fatal server error:
[ 1061.173] (EE) no screens found(EE)
[ 1061.173] (EE)
Please consult the The X.Org Foundation support
at
http://wiki.x.org
for help.
[ 1061.173] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 1061.174] (EE)
[ 1061.531] (EE) Server terminated with error (1). Closing log file.
and
FreeBSD 12.2-RELEASE-p2 GENERIC amd64
FreeBSD 12.2-RELEASE-p2 GENERIC amd64
FreeBSD 12.2-RELEASE-p2 GENERIC amd64
FreeBSD 12.2-RELEASE-p2 GENERIC amd64
[drm] amdgpu kernel modesetting enabled.
amdgpu/polaris10_mc.bin: could not load firmware image, error 2
drmn0: fail (0) to get firmware image with name: amdgpu/polaris10_mc.bin
drmn0: successfully loaded firmware image with mapped name: amdgpu_polaris10_mc_bin
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
amdgpu/polaris10_pfp_2.bin: could not load firmware image, error 2
drmn0: fail (0) to get firmware image with name: amdgpu/polaris10_pfp_2.bin drmn0: successfully loaded firmware image with mapped name: amdgpu_polaris10_pfp_2_bin
amdgpu/polaris10_me_2.bin: could not load firmware image, error 2
drmn0: fail (0) to get firmware image with name: amdgpu/polaris10_me_2.bin drmn0: successfully loaded firmware image with mapped name: amdgpu_polaris10_me_2_bin
amdgpu/polaris10_ce_2.bin: could not load firmware image, error 2
drmn0: fail (0) to get firmware image with name: amdgpu/polaris10_ce_2.bin drmn0: successfully loaded firmware image with mapped name: amdgpu_polaris10_ce_2_bin
amdgpu/polaris10_rlc.bin: could not load firmware image, error 2
drmn0: fail (0) to get firmware image with name: amdgpu/polaris10_rlc.bin drmn0: successfully loaded firmware image with mapped name: amdgpu_polaris10_rlc_bin
amdgpu/polaris10_mec_2.bin: could not load firmware image, error 2
drmn0: fail (0) to get firmware image with name: amdgpu/polaris10_mec_2.bin drmn0: successfully loaded firmware image with mapped name: amdgpu_polaris10_mec_2_bin
amdgpu/polaris10_mec2_2.bin: could not load firmware image, error 2
drmn0: fail (0) to get firmware image with name: amdgpu/polaris10_mec2_2.bin drmn0: successfully loaded firmware image with mapped name: amdgpu_polaris10_mec2_2_bin
amdgpu/polaris10_sdma.bin: could not load firmware image, error 2
drmn0: fail (0) to get firmware image with name: amdgpu/polaris10_sdma.bin drmn0: successfully loaded firmware image with mapped name: amdgpu_polaris10_sdma_bin
amdgpu/polaris10_sdma1.bin: could not load firmware image, error 2
drmn0: fail (0) to get firmware image with name: amdgpu/polaris10_sdma1.bin drmn0: successfully loaded firmware image with mapped name: amdgpu_polaris10_sdma1_bin
amdgpu/polaris10_uvd.bin: could not load firmware image, error 2
drmn0: fail (0) to get firmware image with name: amdgpu/polaris10_uvd.bin drmn0: successfully loaded firmware image with mapped name: amdgpu_polaris10_uvd_bin
amdgpu/polaris10_vce.bin: could not load firmware image, error 2
drmn0: fail (0) to get firmware image with name: amdgpu/polaris10_vce.bin drmn0: successfully loaded firmware image with mapped name: amdgpu_polaris10_vce_bin
amdgpu/polaris10_k_smc.bin: could not load firmware image, error 2
drmn0: fail (0) to get firmware image with name: amdgpu/polaris10_k_smc.bin drmn0: successfully loaded firmware image with mapped name: amdgpu_polaris10_k_smc_bin
drmn0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.23.0 20150101 for drmn0 on minor 0
Finally I will make this a bhyve.
I wish to copy and image of a 300GB Win10 drive
over to a 900GB byhve Img.
Is this possible
??
--
Member - Liberal International This is doctor@@nl2k.ab.ca Ici doctor@@nl2k.ab.ca
Yahweh, Queen & country!Never Satan President Republic!Beware AntiChrist rising!
Look at Psalms 14 and 53 on Atheism
https://www.empire.kred/ROOTNK?t=94a1f39b Born 29 Jan 1969 Redhill, Surrey, UK
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)