On 2017-12-13 09:04 AM, Tommy wrote:
Hi
So finally got a SGI O2 a machine some when i was young.. ;) the issue
is that the machine i have does boot and playes the little chime after
boot but the no matter the screen i plug it in to shows an output. the monitors i have tried it on does register that there is a signal but the screen is black
what am i missing ? or is there something special regarding screens i
have to be aware of.
The system might be set to use a serial console. Try connecting a null
modem cable between the O2 and another machine (PC, Mac, Linux, whatever
you have handy) running a terminal emulator and see what that says. You
may find an error message about failed graphics causing it to fall back
to a serial console or maybe that it's configured for one regardless.
If you haven't already, check out both
http://forums.nekochan.net/ and
the wiki there for more info about diagnosing and fixing SGI systems.
Those forums are much more active than this newsgroup. I have several
SGIs but I don't have any hands-on experience with an O2. So,
unfortunately, I can't offer any more advice than that.
Good luck!
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)