1. Forum
  2. Usenet
  3. COMP.SYS.TANDEM

  • Re: experiences with visual inspect?

    From Rooting Close@21:1/5 to Frank Seiter on Fri Apr 8 12:05:34 2022
    On Tuesday, April 15, 1997 at 2:00:00 PM UTC+7, Frank Seiter wrote:
    I'd like to start an trial run of V.I. at our company.
    any reviews from actual users out there?
    Thanks,
    Frank Seiter
    Pacific Northwest Users of Tandem Systems.

    It is not good for install & difficult to configure

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Bill Honaker@21:1/5 to Rooting Close on Fri Apr 8 14:21:10 2022
    On Fri, 8 Apr 2022 12:05:34 -0700 (PDT), Rooting Close <rootingclose@gmail.com> wrote:

    On Tuesday, April 15, 1997 at 2:00:00 PM UTC+7, Frank Seiter wrote:
    I'd like to start an trial run of V.I. at our company.
    any reviews from actual users out there?
    Thanks,
    Frank Seiter
    Pacific Northwest Users of Tandem Systems.

    It is not good for install & difficult to configure

    The original post was written almost 25 years ago. I'm fairly certain that Frank,
    the Original Poster, has long since retired and no longer needs this information.

    Bill

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Randall@21:1/5 to Bill Honaker on Sat Apr 9 14:09:30 2022
    On Friday, April 8, 2022 at 3:21:13 p.m. UTC-4, Bill Honaker wrote:
    On Fri, 8 Apr 2022 12:05:34 -0700 (PDT), Rooting Close <rootin...@gmail.com> wrote:

    On Tuesday, April 15, 1997 at 2:00:00 PM UTC+7, Frank Seiter wrote:
    I'd like to start an trial run of V.I. at our company.
    any reviews from actual users out there?
    Thanks,
    Frank Seiter
    Pacific Northwest Users of Tandem Systems.

    It is not good for install & difficult to configure
    The original post was written almost 25 years ago. I'm fairly certain that Frank,
    the Original Poster, has long since retired and no longer needs this information.

    Bill

    I was using Visual Inspect 25 years ago and am still waiting to retire some day ... hopefully before the Y2038 bug hits. But yes, you need portmapper, RPC, firewall rules going from the NonStop to your workstation for port 111 (UDP or TCP) and a static
    IP address for your workstation.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)