In article <5958cfd367Spambin@argonet.co.uk>,
Stuart <Spambin@argonet.co.uk> wrote:
Is there a simple, idiots guide to VNC and how to set it up between a PI
and a Kinetic running 4.39
First set up a VNC server on the one computer and then a VNC client on the other.
Server: http://www.phlamethrower.co.uk/riscos/vnc_serv.php
Client: http://effarig.co.uk/riscos/ (Avalanche)
Is there a simple, idiots guide to VNC and how to set it up between a PI
and a Kinetic running 4.39
In message <5958e57b75Paul@sprie.nl>
Paul Sprangers <Paul@sprie.nl> wrote:
In article <5958cfd367Spambin@argonet.co.uk>,
Stuart <Spambin@argonet.co.uk> wrote:
Is there a simple, idiots guide to VNC and how to set it up between a PI >>> and a Kinetic running 4.39
The performance is going to be very very painful to a Kinetic. Its
pretty awful with an Iyonix, but just about usable with ARMx6 and Pi3Bs.
The Pi4B is the only one I've found which is almost transparent in use.
A Pi4B will be the "master", the Kinetic, which has a NET100 card, will
be the "slave".
Sysop: | Keyop |
---|---|
Location: | Huddersfield, West Yorkshire, UK |
Users: | 296 |
Nodes: | 16 (2 / 14) |
Uptime: | 36:58:09 |
Calls: | 6,648 |
Calls today: | 3 |
Files: | 12,193 |
Messages: | 5,329,127 |