1. Forum
  2. Usenet
  3. COMP.SYS.ACORN.APPS

  • Issues with ProCad+

    From Stuart@21:1/5 to All on Sat Apr 3 09:32:54 2021
    Yesterday I did some work with ProCad, having finished I saved the file
    and shutdown ProCad. Later in the afternoon, I wanted to make some small alteration and it just kept giving the error message "abort on data
    transfer at &000DA850", every time I tried to load the file.

    I shutdown and restarted the computer, several times, all other normally running apps shut down with no improvement.

    I have tried again this morning with some older files with the same result.

    I have experienced this before and after several attempts, I recall, I
    just gave up but it is very frustrating.

    It isn't an application I use very often but when I need it, it is
    important.

    Iyonix running 5.24

    --
    Stuart Winsor

    Tools With A Mission
    sending tools across the world
    http://www.twam.co.uk/

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From druck@21:1/5 to Stuart on Sat Apr 3 21:21:37 2021
    On 03/04/2021 09:32, Stuart wrote:
    Yesterday I did some work with ProCad, having finished I saved the file
    and shutdown ProCad. Later in the afternoon, I wanted to make some small alteration and it just kept giving the error message "abort on data
    transfer at &000DA850", every time I tried to load the file.

    I shutdown and restarted the computer, several times, all other normally running apps shut down with no improvement.

    I have tried again this morning with some older files with the same result.

    The file has been corrupted. Have a look at it in an editor, it will be
    mostly meaningless binary, but you may find a chunk of an unrelated text
    file written through the middle of it. If so note which other
    applications you have running at the time.

    ---druck

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)