Maybe you can do something with a WSCST?
You would need to know what special hex sequences are sent to the printer for the size codes and cut. Unfortunately I dont know anything much about these things except I never had a lot of luck. You might get lucky & find one which just works, otherwise
you will be reduced to cut & paste from examples or even reading the manual :(
HTH
Jonathan.
On Monday, 24 September 2018 12:39:08 UTC+1, CENTRINO wrote:
Hi
I'd like to know if an Epson Tikets printer with Ethernet is
controllable from IBM I system.
The printer is an EPSON model TM-T20II
The printer data current is ESC/POS
If so, What should be the CRTDEVPRT command to issue ?
I have tried with:
CRTDEVPRT DEVD(IMTK02) DEVCLS(*LAN) TYPE(3812) MODEL(1) +
LANATTACH(*IP) PORT(9100) ATTACH(*DIRECT) ONLINE(*YES) +
FONT(11 *NONE) FORMFEED(*CONT) SEPDRAWER(*FILE) +
PRTERRMSG(*INFO) MSGQ(*CTLD) ACTTMR(170) INACTTMR(*SEC15) +
LINESPEED(19200) WORDLEN(8) PARITY(*NONE) STOPBITS(1) +
TRANSFORM(*YES) MFRTYPMDL(*WSCST) PPRSRC1(*CONT80) +
PPRSRC2(*NONE) ENVELOPE(*NONE) ASCII899(*NO) +
IMGCFG(*NONE) CHRID(*SYSVAL) RMTLOCNAME('XXX.XXX.XXX.XXX') +
WSCST(*LIBL/QWPDEFAULT) SYSDRVPGM(*IBMSNMPDRV) +
TEXT(' Tikets Nº 2') +
PUBLISHINF(*UNKNOWN *UNKNOWN *UNKNOWN *UNKNOWN *BLANK +
(*UNKNOWN))
I can print but the printer does not cut the ticket at the end of file
nor does recognise any character size changes ...
Thanks in advance.
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)