1. Forum
  2. Usenet
  3. COMP.SYS.SINCLAIR

  • Spectrum to ham radio interface designs?

    From OldbieOne@21:1/5 to All on Sat Apr 10 16:10:52 2021
    Does anyone have a schematic for a basic ham radio interface for a Spectrum
    16 or 48k?

    Thanks
    --
    OldbieOne
    The Guy Who Tells It Like It Is (TM)

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Ian Spencer@21:1/5 to All on Sun Apr 11 18:26:10 2021
    Hi,
    back in the day we did things like transmit and receive SSTV, RTTY and
    CW using just the cassette input and output ports of the Spectrum withut
    any additional hardware interface.

    Ian

    Am 10.04.2021 um 22:10 schrieb OldbieOne:

    Does anyone have a schematic for a basic ham radio interface for a Spectrum 16 or 48k?

    Thanks
    --
    OldbieOne
    The Guy Who Tells It Like It Is (TM)



    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From OldbieOne@21:1/5 to Ian Spencer on Mon Apr 12 13:41:25 2021
    "Ian Spencer" <ianspencer@hotmail.com> wrote in message news:idgm92F427kU1@mid.individual.net...
    Hi,
    back in the day we did things like transmit and receive SSTV, RTTY and
    CW using just the cassette input and output ports of the Spectrum withut
    any additional hardware interface.


    I remember that, but it didn't work very well for high impedence tube gear,
    and there were some isolation boxes out there, like the one from Technical Software somewhere in Wales, but that coimpany is long since gone
    apparently. Even if it's not, googling "technical software" leads to a dead
    end due to all the noise.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)