• Amitek Hawk jumper settings

    From siwilson65535@gmail.com@21:1/5 to Shaun Payne on Sat Jan 26 10:22:08 2019
    Greetings from 20 years in the future. It's worth noting that a version of this board has either the marking on the PCB the wrong way or an error in the manual, as the clock speed of the FPU shown in AIBB shows 14.3 with the jumper setting on INT, but 33.
    9Mhz (with a 40Mhz crystal fitted) with the jumper set to CPU, the opposite of what is given for setting LK4 on P10 of the manual.

    On Friday, 31 May 1996 08:00:00 UTC+1, Shaun Payne wrote:
    Hello there,

    I have an Amitek Hawk ram board in my A1200. I have bought an FPU for it and installed it successfuly. There is a jumper near the FPU
    labelled INT/CPU, everything runs ok with the jumper on either setting but
    I was wondering which position actually activates the FPU ? I bought the board second hand and so have no manual with it.

    What sort of performance increase should I expect (68882 20mhz
    FPU, 4meg of 60ns Fast and usual chip) ?

    Regards.

    ---
    <tsb> T i N M a N
    ---
    Amiga Veteran (10 years in the making!)
    A1200 / 6meg / 250HD
    A500 / 4meg / Scsi 500HD + CDRom

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)