• B011 and A T800

    From Mike B.@21:1/5 to All on Sun May 23 09:34:54 2021
    Hi!

    Has someone ever run an B011 with an T800?

    When I change the T414B-20 to an T800C-20 or T800D-25 everything works fine (at 20MHz as configured) but get stucked when accessing external memory (e.g the first word after internal memory). Changing back to the T414 (without modifying any jumper), the
    memory works normally. Parity is disabled.

    rspy -l -mc -me 2048
    # Part rt Link0 Link1 Link2 Link3 RAM@cycle
    0 T414B 20 291K ... ... ... 2K@1,2046K@5|

    -Mike

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From pahihu@21:1/5 to All on Tue May 25 03:01:39 2021
    Hi,

    I am a noob, but the doc says (Default Jumper and Switch Settings)
    for 5 LKxx jumpers that "Reserved for T800 use".

    pahihu

    Mike B. ezt írta (2021. május 23., vasárnap, 18:34:55 UTC+2):
    Hi!

    Has someone ever run an B011 with an T800?


    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Mike B.@21:1/5 to All on Sun Jun 20 14:07:47 2021
    Hi!

    Yes the additional jumper are for the additional T800 pins (ProcSpeedSelect and so on). I've checked them and set them accordingly. Also the speed is set to 20MHz.

    My problem is the external memory access which is not working.
    From my level of knowledge all T414 internal memory configurations are identical to the T800 configs.

    -Mike

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)