Hello,

Maybe this will amuse some of you. Late last year I finally started on a
crazy project of mine (Covid confinement is boring), putting a modern
FPGA on a SBus board to add some functionalities to some trusty old SPARCstations (of course people had put FPGAs on SBus back in the day
for various reasons, but those boards are long gone, and I wanted the
benefits of a modern FPGA).

Everything is open-source here:
<https://github.com/rdolbeau/SBusFPGA>
There's some pictures of the board in there as well.

Hardware interface is working (the FPGA board itself is off-the-shelf,
only the adapter board is custom), gateware & software for NetBSD 9.0 is
an ongoing effort but the devices are recognized by the PROM and NetBSD,
I can do some crypto, and the micro-sd card support is (slowly) moving
forward :-)

Cordially,

--
Romain

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On 03/16/21 18:07, Romain Dolbeau wrote:

Hello,

Maybe this will amuse some of you. Late last year I finally started on a crazy project of mine (Covid confinement is boring), putting a modern
FPGA on a SBus board to add some functionalities to some trusty old SPARCstations (of course people had put FPGAs on SBus back in the day
for various reasons, but those boards are long gone, and I wanted the benefits of a modern FPGA).

Everything is open-source here:
<https://github.com/rdolbeau/SBusFPGA>
There's some pictures of the board in there as well.

Hardware interface is working (the FPGA board itself is off-the-shelf,
only the adapter board is custom), gateware & software for NetBSD 9.0 is
an ongoing effort but the devices are recognized by the PROM and NetBSD,
I can do some crypto, and the micro-sd card support is (slowly) moving forward :-)

Cordially,

Very good project by the sound of it. If an sd card could be made
visible to obp as a boot disk, that would be even better. scsi drives
are becoming an endangered species and while there are ssd type
replacements, they are expensive. and not open source.

Don't know where you are located, but have old sbus machines here in
the uk if you need some test hardware access...

Chris

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On 3/16/21 6:56 PM, chris wrote:

If an sd card could be made visible to obp as a boot disk, that would
be even better. scsi drives are becoming an endangered species and
while there are ssd type replacements, they are expensive. and not
open source.

Are you aware of the SCSI-to-SD (card) converters?

Are you aware of the bit banging that people have done to get a
Raspberry Pi, et al., to pretend to be an old SCSI device?



--
Grant. . . .
unix || die

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On 3/16/21 12:07 PM, Romain Dolbeau wrote:

Hello,

Hi,

Maybe this will amuse some of you.

It's not in my personal wheel house. But it is in the wheel house of
multiple friends that I've shared it with on IRC and Twitter.



--
Grant. . . .
unix || die

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On 3/17/21 1:56 AM, chris wrote:

Very good project by the sound of it. If an sd card could be made
visible to obp as a boot disk, that would be even better.

That would be the endgame, but it's a long way away - writing a Forth
driver doesn't look trivial. And I still need to convince NetBSD to use
the sd-card first, and then to figure out if I can get writing to work
(I've yet to see the FPGA write successfully to the sd-card on the
adapter board, even using FPGA designs from real HW designers...).

The original intent was to also have a modern video output (something
like HDMI or DisplayPort), but that was too complex to add for my first
PCB, so I stuck with micro-sd + internal devices.

Don't know where you are located, but have old sbus machines here in
the uk if you need some test hardware access...

Thanks for the kind offer, but I have SS20s and an IPX easily accessible
(yet to dare try the IPX!), and SS2/SS5 and an Ultra 1 that are less so
at the moment but could expand testing eventually. Given the documented 'issues' with the SS1 SBus, I'm not sure it's ever going to be a target
(though I do have one of unknown working status). I'm in France so UK
has been a source of old Sun hardware in the past, it's easier to ship
from there than from the USA.

Cordially,

--
Romain Dolbeau

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On 3/17/21 2:09 AM, Grant Taylor wrote:

Are you aware of the SCSI-to-SD (card) converters?

Can't answer for Chris, but my SS20 is booting from a SCSI2SD V6 and
another one is booting from a V5 :-) They're a bit expensive for what
they are I think, which is one of the reason I added a micro-sd slot to
my board... and having started the work I now understand the price
better :-)

Are you aware of the bit banging that people have done to get a
Raspberry Pi, et al., to pretend to be an old SCSI device?

I wasn't aware of that, googled it and found <https://github.com/akuker/RASCSI/>, an adapter board to turn a RPi into
a SCSI device. And now I want one... Thanks for the tip!

Cordially,

--
Romain Dolbeau

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On 03/17/21 01:09, Grant Taylor wrote:

On 3/16/21 6:56 PM, chris wrote:

If an sd card could be made visible to obp as a boot disk, that would
be even better. scsi drives are becoming an endangered species and
while there are ssd type replacements, they are expensive. and not
open source.

Are you aware of the SCSI-to-SD (card) converters?

Are you aware of the bit banging that people have done to get a
Raspberry Pi, et al., to pretend to be an old SCSI device?

Yes, but just too expensive for my taste and budget. At 50 ukp or
less, I might sample, but the current solution here is to use
ex IBM server 2.5 scsi drives. Lowest cost are usually 36Gb,
which is more than enough. Thet also fit ss20 etc directly with a
slightly modified 3.5 -> 2.5 metal tray. Fraction of the cost
of the sd solution as well...

Chris

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On 3/17/21 1:47 AM, Romain Dolbeau wrote:

I wasn't aware of that, googled it and found https://github.com/akuker/RASCSI/, an adapter board to turn a RPi into
a SCSI device. And now I want one... Thanks for the tip!

You're welcome.

That's why I shared.



--
Grant. . . .
unix || die

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)