1. Forum
  2. Usenet
  3. COMP.SYS.IBM.PS2.HARDWARE

  • Does the 50z support SCSI?

    From Louis Ohland@21:1/5 to All on Sun Sep 3 07:32:37 2023
    There is a gung-ho member of VCF that is trying to install a Spock on a
    50z and use an ZuluSCSI.

    IBM SCSI w/cache in PS/2 Model 50 troubles https://forum.vcfed.org/index.php?threads/ibm-scsi-w-cache-in-ps-2-model-50-troubles.1244438/#post-1335705

    I >THINK< removing the integrated HD and running just SPOCK would do. Of course, the bootable image should be at ID6.

    BUT... I have >ZEE-RO< knowledge of ANY functioning, file-based SCSI
    emulator working in a PS/2, either as a boot device -OR- as a ROM-less
    device.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From gfretwell@aol.com@21:1/5 to All on Sun Sep 3 11:48:47 2023
    On Sun, 3 Sep 2023 07:32:37 -0500, Louis Ohland <ohland@charter.net>
    wrote:

    There is a gung-ho member of VCF that is trying to install a Spock on a
    50z and use an ZuluSCSI.

    IBM SCSI w/cache in PS/2 Model 50 troubles >https://forum.vcfed.org/index.php?threads/ibm-scsi-w-cache-in-ps-2-model-50-troubles.1244438/#post-1335705

    I >THINK< removing the integrated HD and running just SPOCK would do. Of >course, the bootable image should be at ID6.

    BUT... I have >ZEE-RO< knowledge of ANY functioning, file-based SCSI
    emulator working in a PS/2, either as a boot device -OR- as a ROM-less >device.

    I ran a Mod 70 SCSI only.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From richard smice@21:1/5 to James Hall on Sun Sep 3 15:56:34 2023
    On Sunday, September 3, 2023 at 6:42:57 PM UTC-4, James Hall wrote:
    On Sunday, September 3, 2023 at 11:48:55 AM UTC-4, gfre...@aol.com wrote:
    On Sun, 3 Sep 2023 07:32:37 -0500, Louis Ohland <ohl...@charter.net> wrote:
    There is a gung-ho member of VCF that is trying to install a Spock on a >50z and use an ZuluSCSI.

    IBM SCSI w/cache in PS/2 Model 50 troubles >https://forum.vcfed.org/index.php?threads/ibm-scsi-w-cache-in-ps-2-model-50-troubles.1244438/#post-1335705

    I >THINK< removing the integrated HD and running just SPOCK would do. Of >course, the bootable image should be at ID6.

    BUT... I have >ZEE-RO< knowledge of ANY functioning, file-based SCSI >emulator working in a PS/2, either as a boot device -OR- as a ROM-less >device.
    I ran a Mod 70 SCSI only.
    Future Domain MS-700 runs fine in my 50Z
    Almost any third party scsi adapter will work. it will need a power connector on it or you will need to modify the power supply cables to allow for one..
    future domain, adaptec, were the upgrades back then... scsi , bus logic... arco for IDE procom pira,,, as well..

    or if you could afford it,,,, Kingston on board hard card with memory...

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From James Hall@21:1/5 to gfre...@aol.com on Sun Sep 3 15:42:56 2023
    On Sunday, September 3, 2023 at 11:48:55 AM UTC-4, gfre...@aol.com wrote:
    On Sun, 3 Sep 2023 07:32:37 -0500, Louis Ohland <ohl...@charter.net>
    wrote:
    There is a gung-ho member of VCF that is trying to install a Spock on a >50z and use an ZuluSCSI.

    IBM SCSI w/cache in PS/2 Model 50 troubles >https://forum.vcfed.org/index.php?threads/ibm-scsi-w-cache-in-ps-2-model-50-troubles.1244438/#post-1335705

    I >THINK< removing the integrated HD and running just SPOCK would do. Of >course, the bootable image should be at ID6.

    BUT... I have >ZEE-RO< knowledge of ANY functioning, file-based SCSI >emulator working in a PS/2, either as a boot device -OR- as a ROM-less >device.
    I ran a Mod 70 SCSI only.

    Future Domain MS-700 runs fine in my 50Z

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From IBMMuseum@21:1/5 to All on Mon Sep 4 11:10:39 2023
    If just to support a solid-state drive, better to get a different SCSI adapter - or an MCIDE/MCIDE-CF.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From IBMMuseum@21:1/5 to IBMMuseum on Mon Sep 4 11:11:55 2023
    On Monday, September 4, 2023 at 12:10:40 PM UTC-6, IBMMuseum wrote:
    If just to support a solid-state drive, better to get a different SCSI adapter - or an MCIDE/MCIDE-CF.

    Maybe just a 'where angels fear to tread' effort...

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)