Confusing.
System Board Enable, 0094h, bit 3 [SCSI]?. There is no "SCSI" group defined
"When this bit is set to 0, the system board SCSI controller is placed
in setup mode and is controlled through POS Register 2 (0102h). When
this bit is set to 1 and Bit 0 in POS Register 2 is set to 1, the system
board SCSI controller is enabled."
POS Register 2 (0102h),
Bit 0 is the SCSI Enable bit.
Bit 0 = 1, Enabled
Bit 0 = 0, Disabled
On 8/11/2021 08:00, Louis Ohland wrote:
I was idly clearing up some debris, and foundt the 56/57 tech ref for
486SLC3 systems. Y'know, for the little DEBby...
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)