H067282 8530 BUS ADAPTER BATTERY VOLTAGE
EARLY RELEASES OF THE 8530 HMS (3-RING BINDER) MAPS, SYSTEM
BOARD, PAGE 0100-4, SHOW INCORRECT PINS FOR CHECKING VOLTAGE
ON THE BUS ADAPTER CARD.
IN FIGURE ONE, THE PINS LABELED "0" AND "39" SHOULD ACTUALLY
BE LABELED PINS "1" AND "40". CORRECTLY MEASURING THE VOLTAGE
IS THEN DONE AT PINS 38 AND 39 (THE SECOND AND THIRD PINS FROM
THE RIGHT EDGE)
REPLACE THE BUS ADAPTER CARD IF VOLTAGE IS LESS THAN 2.5 VOLTS
BETWEEN THE CORRECT PINS.
H067282 8530 BUS ADAPTER BATTERY VOLTAGE
EARLY RELEASES OF THE 8530 HMS (3-RING BINDER) MAPS, SYSTEM
BOARD, PAGE 0100-4, SHOW INCORRECT PINS FOR CHECKING VOLTAGE
ON THE BUS ADAPTER CARD.
IN FIGURE ONE, THE PINS LABELED "0" AND "39" SHOULD ACTUALLY
BE LABELED PINS "1" AND "40". CORRECTLY MEASURING THE VOLTAGE
IS THEN DONE AT PINS 38 AND 39 (THE SECOND AND THIRD PINS FROM
THE RIGHT EDGE)
REPLACE THE BUS ADAPTER CARD IF VOLTAGE IS LESS THAN 2.5 VOLTS
BETWEEN THE CORRECT PINS.
Yes, the 2nd and 3rd pins on that side of the riser. I've never seen a battery voltage below 2.65VDC - after all these years.
H067282 8530 BUS ADAPTER BATTERY VOLTAGE
EARLY RELEASES OF THE 8530 HMS (3-RING BINDER) MAPS, SYSTEM
BOARD, PAGE 0100-4, SHOW INCORRECT PINS FOR CHECKING VOLTAGE
ON THE BUS ADAPTER CARD.
IN FIGURE ONE, THE PINS LABELED "0" AND "39" SHOULD ACTUALLY
BE LABELED PINS "1" AND "40". CORRECTLY MEASURING THE VOLTAGE
IS THEN DONE AT PINS 38 AND 39 (THE SECOND AND THIRD PINS FROM
THE RIGHT EDGE)
REPLACE THE BUS ADAPTER CARD IF VOLTAGE IS LESS THAN 2.5 VOLTS
BETWEEN THE CORRECT PINS.
Yes, the 2nd and 3rd pins on that side of the riser. I've never seen a battery voltage below 2.65VDC - after all these years.
H067282 8530 BUS ADAPTER BATTERY VOLTAGE
EARLY RELEASES OF THE 8530 HMS (3-RING BINDER) MAPS, SYSTEM
BOARD, PAGE 0100-4, SHOW INCORRECT PINS FOR CHECKING VOLTAGE
ON THE BUS ADAPTER CARD.
IN FIGURE ONE, THE PINS LABELED "0" AND "39" SHOULD ACTUALLY
BE LABELED PINS "1" AND "40". CORRECTLY MEASURING THE VOLTAGE
IS THEN DONE AT PINS 38 AND 39 (THE SECOND AND THIRD PINS FROM
THE RIGHT EDGE)
REPLACE THE BUS ADAPTER CARD IF VOLTAGE IS LESS THAN 2.5 VOLTS
BETWEEN THE CORRECT PINS.
| Sysop: | Keyop |
|---|---|
| Location: | Huddersfield, West Yorkshire, UK |
| Users: | 399 |
| Nodes: | 16 (2 / 14) |
| Uptime: | 98:36:21 |
| Calls: | 8,363 |
| Calls today: | 2 |
| Files: | 13,162 |
| Messages: | 5,897,721 |
