The GUP page says:
"Have you INSTALL-ed your monitor's scan rates into the ATI EEPROM?Once that has been done correctly, you can use 8514/A drivers if all
else fails (ATI GUP is 8514/A register compatible)."
(https://ardent-tool.com/video/ATI_Graphics_Ultra_Pro.html#Trivia)
So, the 1Kbit EEPROM (U2) is there to store scan rates? Why EEPROM? Why
not set this thru the driver (on boot/mode change)?
"Have you INSTALL-ed your monitor's scan rates into the ATI EEPROM?Once that has been done correctly, you can use 8514/A drivers if all
The GUP page says:
"Have you INSTALL-ed your monitor's scan rates into the ATI EEPROM?Once that has been done correctly, you can use 8514/A drivers if all
else fails (ATI GUP is 8514/A register compatible)."
(https://ardent-tool.com/video/ATI_Graphics_Ultra_Pro.html#Trivia)
So, the 1Kbit EEPROM (U2) is there to store scan rates? Why EEPROM? Why
not set this thru the driver (on boot/mode change)?
Sysop: | Keyop |
---|---|
Location: | Huddersfield, West Yorkshire, UK |
Users: | 399 |
Nodes: | 16 (2 / 14) |
Uptime: | 98:13:44 |
Calls: | 8,363 |
Calls today: | 2 |
Files: | 13,162 |
Messages: | 5,897,715 |