On Sunday, April 2, 2006 at 3:58:52 PM UTC+5:30, Kai wrote:

hi,

the preceding posts all gave u important information.

But I want to emphasize that u should connect the 2 serial ports in a
correct way.IE, u should use null modem cable ( http://www.nullmodem.com/NullModem.htm )to connect the 2 serial
ports, or simply make sure that
the 3 vital pins Tx,Rx,Gnd are connected as follows

PortA PortB
TX ------ RX
RX ------ TX
GND ---- GND

you can make use of the 2 serial ports in your device. If u have only
one serial port, u have to make use of one more serial port in another
PC, and u can have some com debug software install on the host.

Good luck.

_________________
If you ask for help to your problem and someone answers, return the
favor by telling if the suggested fix works!

vxworks_quary wrote:

I'm beginner of Vxworks.I want to know how to access the data through serial port.i am using VxWorks 5.5.
good day.

Do we have any idea on how to get notified when a USB device is connected(plugged in) or disconnected(plugged out) for serial communication (Serial to USB based)?

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)