How to Fix Display Issues on Atouch A7+ (4G 16GB) SP7731 with 2nd Update Firmware
If you are looking for a solution to fix the display problems on your Atouch A7+ (4G 16GB) SP7731 device, you have come to the right place. In this article, we will show you how to flash the 2nd update firmware on your device and resolve the display
issues.

The Atouch A7+ (4G 16GB) SP7731 is a budget-friendly tablet that runs on Android 6.0 Marshmallow. It has a 7-inch IPS display with a resolution of 1024 x 600 pixels. However, some users have reported that their device has display problems such as
flickering, black screen, white screen, or inverted colors. These problems can be caused by software bugs, hardware damage, or incompatible firmware.

Atouch A7 Flash File (4G 16GB) SP7731 Display Fix 2Nd Update Firmware
Download Zip https://cinurl.com/2wGBTB



One way to fix these display issues is to flash the 2nd update firmware on your device. The 2nd update firmware is a newer version of the software that can improve the performance and stability of your device. It can also fix some of the display problems
that you may encounter.

To flash the 2nd update firmware on your Atouch A7+ (4G 16GB) SP7731 device, you will need the following tools and files:


A USB cable
A PC or laptop
The Atouch A7+ (4G 16GB) SP7731 flash file[^1^]
The SP Flash Tool
The USB drivers for your device

Once you have downloaded and installed all the necessary tools and files, you can follow these steps to flash the 2nd update firmware on your device:


Turn off your device and remove the battery if possible.
Launch the SP Flash Tool on your PC or laptop.
Click on the "Download" tab and then click on the "Scatter-loading" button. Browse and select the scatter file from the Atouch A7+ (4G 16GB) SP7731 flash file folder.
Make sure that all the boxes are checked and then click on the "Download" button.
Connect your device to your PC or laptop using the USB cable while holding the volume down or volume up button.
The flashing process will begin and you will see a green circle when it is completed.
Disconnect your device and reboot it.

Congratulations! You have successfully flashed the 2nd update firmware on your Atouch A7+ (4G 16GB) SP7731 device. You should now be able to enjoy a better display quality on your device. If you still face any display issues, you may need to contact a
professional technician for further assistance.
In this article, we have shown you how to fix the display issues on your Atouch A7+ (4G 16GB) SP7731 device by flashing the 2nd update firmware. However, flashing the firmware is not the only solution to resolve the display problems. There are some other
tips and tricks that you can try to improve the display quality on your device. Here are some of them:




Adjust the brightness and contrast settings on your device. Sometimes, the display issues can be caused by improper brightness and contrast settings that make the screen too dark or too bright. You can adjust these settings from the Settings menu on your
device.
Clear the cache and data of your device. Sometimes, the display issues can be caused by corrupted or outdated cache and data files that interfere with the normal functioning of your device. You can clear these files from the Settings menu on your device.
Perform a factory reset on your device. Sometimes, the display issues can be caused by a software glitch or a virus that affects the system files of your device. You can perform a factory reset on your device to erase all the data and settings and
restore your device to its original state. However, you should backup your important data before doing this as it will delete everything on your device.

These are some of the tips and tricks that you can try to fix the display issues on your Atouch A7+ (4G 16GB) SP7731 device. We hope that this article has been helpful for you. If you have any questions or feedback, please feel free to leave a comment
below.
35727fac0c

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)