1. Forum
  2. Usenet
  3. COMP.LANG.XHARBOUR

  • Re: hb_CheckSpanMode

    From Enrico Maria Giordano@21:1/5 to All on Thu Sep 30 21:39:53 2021
    Il 30/09/2021 21:35, Robert Campsmith ha scritto:

    Hey Everybody,

    I just moved my xHarbour from my old WinXP box to a newer Win10 machine. After getting everything moved over, I was actually able to build the
    project (with the same old warnings, but no errors). However, when I try
    to launch the executable, I get the following message:

    "The procedure entry point hb_CheckSpanMode could not be located in the dynamic link library."

    It seems that the only place I can find the phrase 'hb_CheckSpanMode' is
    in the xHbZipDll.dll

    Any ideas or suggestions. It still builds and executes on the old XP box.

    If you are using xHarbour.com (not xHarbour.org) distribution then you
    have to ask them for support, I'm afraid.

    EMG

    http://www.emagsoftware.it
    http://www.emagsoftware.it/emgmusic
    http://www.emagsoftware.it/spectrum
    http://www.emagsoftware.it/tbosg

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Robert Campsmith@21:1/5 to All on Thu Sep 30 15:35:42 2021
    Hey Everybody,

    I just moved my xHarbour from my old WinXP box to a newer Win10 machine.
    After getting everything moved over, I was actually able to build the
    project (with the same old warnings, but no errors). However, when I try
    to launch the executable, I get the following message:

    "The procedure entry point hb_CheckSpanMode could not be located in the
    dynamic link library."

    It seems that the only place I can find the phrase 'hb_CheckSpanMode' is
    in the xHbZipDll.dll

    Any ideas or suggestions. It still builds and executes on the old XP box.

    Thanks,
    -- Robert

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Robert Campsmith@21:1/5 to Enrico Maria Giordano on Fri Oct 1 15:05:19 2021
    Thanks Enrico,

    Do you know how I go about contacting the xHarbour.com group?

    Thanks,
    --Robert

    On 9/30/2021 3:39 PM, Enrico Maria Giordano wrote:
    Il 30/09/2021 21:35, Robert Campsmith ha scritto:

    Hey Everybody,

    I just moved my xHarbour from my old WinXP box to a newer Win10
    machine. After getting everything moved over, I was actually able to
    build the project (with the same old warnings, but no errors).
    However, when I try to launch the executable, I get the following
    message:

    "The procedure entry point hb_CheckSpanMode could not be located in
    the dynamic link library."

    It seems that the only place I can find the phrase 'hb_CheckSpanMode'
    is in the xHbZipDll.dll

    Any ideas or suggestions. It still builds and executes on the old XP box.

    If you are using xHarbour.com (not xHarbour.org) distribution then you
    have to ask them for support, I'm afraid.

    EMG

    http://www.emagsoftware.it
    http://www.emagsoftware.it/emgmusic
    http://www.emagsoftware.it/spectrum
    http://www.emagsoftware.it/tbosg

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Enrico Maria Giordano@21:1/5 to All on Fri Oct 1 21:19:51 2021
    Il 01/10/2021 21:05, Robert Campsmith ha scritto:

    Thanks Enrico,

    Do you know how I go about contacting the xHarbour.com group?

    www.xharbour.com

    Or just migrate to xharbour.org official distribution. :-)

    EMG

    http://www.emagsoftware.it
    http://www.emagsoftware.it/emgmusic
    http://www.emagsoftware.it/spectrum
    http://www.emagsoftware.it/tbosg

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)