Hi!
Is that how it should be? Is this normal or am I doing something wrong?
gcc 10.3.0
...
[ 89%] Building C object CMakeFiles/libyottadb.dir/sr_unix/ftok_main.c.o
[ 89%] Linking C shared module libyottadb.so /tmp/tmp/YDB/sr_port/gdsfhead.h:1101:21: warning: type of ‘pin_fail_bt’ does not match original declaration [-Wlto-type-mismatch]
1101 | GBLREF bt_rec_ptr_t pin_fail_bt; /* Pointer to bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:891:21: note: ‘pin_fail_bt’ was previously declared here
891 | GBLDEF bt_rec_ptr_t pin_fail_bt; /* Pointer to bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:891:21: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
/tmp/tmp/YDB/sr_port/gdsfhead.h:1102:16: warning: type of ‘pin_fail_bt_contents’ does not match original declaration [-Wlto-type-mismatch]
1102 | GBLREF bt_rec pin_fail_bt_contents; /* Contents of bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:892:16: note: ‘pin_fail_bt_contents’ was previously declared here
892 | GBLDEF bt_rec pin_fail_bt_contents; /* Contents of bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:892:16: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
/tmp/tmp/YDB/sr_port/dm_setup.c:20:18: warning: type of ‘gtm_err_dev’ does not match original declaration [-Wlto-type-mismatch]
20 | GBLREF io_desc *gtm_err_dev;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:412:19: note: ‘gtm_err_dev’ was previously declared here
412 | GBLDEF io_desc *gtm_err_dev;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:412:19: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
/tmp/tmp/YDB/sr_port/m_zwrite.c:47:25: warning: type of ‘svn_data’ does not match original declaration [-Wlto-type-mismatch]
47 | LITREF svn_data_type svn_data[];
| ^
/tmp/tmp/YDB/sr_port/expritem.c:147:22: note: ‘svn_data’ was previously declared here
147 | LITDEF svn_data_type svn_data[] =
| ^
/tmp/tmp/YDB/sr_port/op_close.c:27:18: warning: type of ‘active_device’ does not match original declaration [-Wlto-type-mismatch]
27 | GBLREF io_desc *active_device;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:161:18: note: ‘active_device’ was previously declared here
161 | GBLDEF io_desc *active_device;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:161:18: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
[ 89%] Built target libyottadb
Scanning dependencies of target dse
Scanning dependencies of target gtcm_pkdisp
Scanning dependencies of target yottadb
Scanning dependencies of target dbcertify
Scanning dependencies of target lke
Scanning dependencies of target mupip
Scanning dependencies of target gtmsecshr_real
[ 89%] Building C object CMakeFiles/dse.dir/sr_unix/dse.c.o
[ 89%] Building C object CMakeFiles/semstat2.dir/sr_unix/semstat2.c.o
[ 89%] Building C object CMakeFiles/gtcm_pkdisp.dir/sr_unix_cm/gtcm_pkdisp.c.o
...
On Saturday, October 2, 2021 at 10:52:26 AM UTC-4, suka...@gmail.com wrote:
Hi!
Is that how it should be? Is this normal or am I doing something wrong? gcc 10.3.0
...Are you following the instructions in the README, or are you trying to compile it yourself with your own gcc flags? gcc flags do matter. Also, which Linux distribution/version are you using? Thank you.
[ 89%] Building C object CMakeFiles/libyottadb.dir/sr_unix/ftok_main.c.o
[ 89%] Linking C shared module libyottadb.so /tmp/tmp/YDB/sr_port/gdsfhead.h:1101:21: warning: type of ‘pin_fail_bt’ does not match original declaration [-Wlto-type-mismatch]
1101 | GBLREF bt_rec_ptr_t pin_fail_bt; /* Pointer to bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:891:21: note: ‘pin_fail_bt’ was previously declared here
891 | GBLDEF bt_rec_ptr_t pin_fail_bt; /* Pointer to bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:891:21: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
/tmp/tmp/YDB/sr_port/gdsfhead.h:1102:16: warning: type of ‘pin_fail_bt_contents’ does not match original declaration [-Wlto-type-mismatch]
1102 | GBLREF bt_rec pin_fail_bt_contents; /* Contents of bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:892:16: note: ‘pin_fail_bt_contents’ was previously declared here
892 | GBLDEF bt_rec pin_fail_bt_contents; /* Contents of bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:892:16: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
/tmp/tmp/YDB/sr_port/dm_setup.c:20:18: warning: type of ‘gtm_err_dev’ does not match original declaration [-Wlto-type-mismatch]
20 | GBLREF io_desc *gtm_err_dev;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:412:19: note: ‘gtm_err_dev’ was previously declared here
412 | GBLDEF io_desc *gtm_err_dev;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:412:19: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
/tmp/tmp/YDB/sr_port/m_zwrite.c:47:25: warning: type of ‘svn_data’ does not match original declaration [-Wlto-type-mismatch]
47 | LITREF svn_data_type svn_data[];
| ^
/tmp/tmp/YDB/sr_port/expritem.c:147:22: note: ‘svn_data’ was previously declared here
147 | LITDEF svn_data_type svn_data[] =
| ^
/tmp/tmp/YDB/sr_port/op_close.c:27:18: warning: type of ‘active_device’ does not match original declaration [-Wlto-type-mismatch]
27 | GBLREF io_desc *active_device;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:161:18: note: ‘active_device’ was previously declared here
161 | GBLDEF io_desc *active_device;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:161:18: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
[ 89%] Built target libyottadb
Scanning dependencies of target dse
Scanning dependencies of target gtcm_pkdisp
Scanning dependencies of target yottadb
Scanning dependencies of target dbcertify
Scanning dependencies of target lke
Scanning dependencies of target mupip
Scanning dependencies of target gtmsecshr_real
[ 89%] Building C object CMakeFiles/dse.dir/sr_unix/dse.c.o
[ 89%] Building C object CMakeFiles/semstat2.dir/sr_unix/semstat2.c.o
[ 89%] Building C object CMakeFiles/gtcm_pkdisp.dir/sr_unix_cm/gtcm_pkdisp.c.o
...
Regards
– Bhaskar
As newer versions of gcc generate more warnings, part of our development activity is to check those warnings, determine which are legitimate (and should be addressed) vs. those which are “check this out” (and should be suppressed with flags).Hi!
Is that how it should be? Is this normal or am I doing something wrong? gcc 10.3.0
...Are you following the instructions in the README, or are you trying to compile it yourself with your own gcc flags? gcc flags do matter. Also, which Linux distribution/version are you using? Thank you.
[ 89%] Building C object CMakeFiles/libyottadb.dir/sr_unix/ftok_main.c.o [ 89%] Linking C shared module libyottadb.so /tmp/tmp/YDB/sr_port/gdsfhead.h:1101:21: warning: type of ‘pin_fail_bt’ does not match original declaration [-Wlto-type-mismatch]
1101 | GBLREF bt_rec_ptr_t pin_fail_bt; /* Pointer to bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:891:21: note: ‘pin_fail_bt’ was previously declared here
891 | GBLDEF bt_rec_ptr_t pin_fail_bt; /* Pointer to bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:891:21: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
/tmp/tmp/YDB/sr_port/gdsfhead.h:1102:16: warning: type of ‘pin_fail_bt_contents’ does not match original declaration [-Wlto-type-mismatch]
1102 | GBLREF bt_rec pin_fail_bt_contents; /* Contents of bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:892:16: note: ‘pin_fail_bt_contents’ was previously declared here
892 | GBLDEF bt_rec pin_fail_bt_contents; /* Contents of bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:892:16: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
/tmp/tmp/YDB/sr_port/dm_setup.c:20:18: warning: type of ‘gtm_err_dev’ does not match original declaration [-Wlto-type-mismatch]
20 | GBLREF io_desc *gtm_err_dev;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:412:19: note: ‘gtm_err_dev’ was previously declared here
412 | GBLDEF io_desc *gtm_err_dev;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:412:19: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
/tmp/tmp/YDB/sr_port/m_zwrite.c:47:25: warning: type of ‘svn_data’ does not match original declaration [-Wlto-type-mismatch]
47 | LITREF svn_data_type svn_data[];
| ^
/tmp/tmp/YDB/sr_port/expritem.c:147:22: note: ‘svn_data’ was previously declared here
147 | LITDEF svn_data_type svn_data[] =
| ^
/tmp/tmp/YDB/sr_port/op_close.c:27:18: warning: type of ‘active_device’ does not match original declaration [-Wlto-type-mismatch]
27 | GBLREF io_desc *active_device;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:161:18: note: ‘active_device’ was previously declared here
161 | GBLDEF io_desc *active_device;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:161:18: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
[ 89%] Built target libyottadb
Scanning dependencies of target dse
Scanning dependencies of target gtcm_pkdisp
Scanning dependencies of target yottadb
Scanning dependencies of target dbcertify
Scanning dependencies of target lke
Scanning dependencies of target mupip
Scanning dependencies of target gtmsecshr_real
[ 89%] Building C object CMakeFiles/dse.dir/sr_unix/dse.c.o
[ 89%] Building C object CMakeFiles/semstat2.dir/sr_unix/semstat2.c.o
[ 89%] Building C object CMakeFiles/gtcm_pkdisp.dir/sr_unix_cm/gtcm_pkdisp.c.o
...
RegardsThank you for reporting this. For some reason, the great G is not showing your later post that you are compiling on Gentoo.
– Bhaskar
I just tried building r1.32 on Debian 11, one of the Supported platforms with gcc version 10.2.1 and it compiled without any warnings. There are many Linux distributions, many versions of gcc, and a plethora of compilation flags that control warnings.
Regards
– Bhaskar
I incorrectly sent the answer to the mailing list from another email, so you did not see it.As newer versions of gcc generate more warnings, part of our development activity is to check those warnings, determine which are legitimate (and should be addressed) vs. those which are “check this out” (and should be suppressed with flags).
Yes I followed instructions for gcc from README.
I'm using Calculate Linux Desktop (Gentoo based distro).
Kernel 5.10.32
As far as I remember, when compiling with an early version gcc 10.2.? (may be 10.2.1), there were also problems.
Sergey.
Hi!
Is that how it should be? Is this normal or am I doing something wrong?
gcc 10.3.0
...Are you following the instructions in the README, or are you trying to compile it yourself with your own gcc flags? gcc flags do matter. Also, which Linux distribution/version are you using? Thank you.
[ 89%] Building C object CMakeFiles/libyottadb.dir/sr_unix/ftok_main.c.o
[ 89%] Linking C shared module libyottadb.so /tmp/tmp/YDB/sr_port/gdsfhead.h:1101:21: warning: type of ‘pin_fail_bt’ does not match original declaration [-Wlto-type-mismatch]
1101 | GBLREF bt_rec_ptr_t pin_fail_bt; /* Pointer to bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:891:21: note: ‘pin_fail_bt’ was previously declared here
891 | GBLDEF bt_rec_ptr_t pin_fail_bt; /* Pointer to bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:891:21: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
/tmp/tmp/YDB/sr_port/gdsfhead.h:1102:16: warning: type of ‘pin_fail_bt_contents’ does not match original declaration [-Wlto-type-mismatch]
1102 | GBLREF bt_rec pin_fail_bt_contents; /* Contents of bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:892:16: note: ‘pin_fail_bt_contents’ was previously declared here
892 | GBLDEF bt_rec pin_fail_bt_contents; /* Contents of bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:892:16: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
/tmp/tmp/YDB/sr_port/dm_setup.c:20:18: warning: type of ‘gtm_err_dev’ does not match original declaration [-Wlto-type-mismatch]
20 | GBLREF io_desc *gtm_err_dev;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:412:19: note: ‘gtm_err_dev’ was previously declared here
412 | GBLDEF io_desc *gtm_err_dev;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:412:19: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
/tmp/tmp/YDB/sr_port/m_zwrite.c:47:25: warning: type of ‘svn_data’ does not match original declaration [-Wlto-type-mismatch]
47 | LITREF svn_data_type svn_data[];
| ^
/tmp/tmp/YDB/sr_port/expritem.c:147:22: note: ‘svn_data’ was previously declared here
147 | LITDEF svn_data_type svn_data[] =
| ^
/tmp/tmp/YDB/sr_port/op_close.c:27:18: warning: type of ‘active_device’ does not match original declaration [-Wlto-type-mismatch]
27 | GBLREF io_desc *active_device;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:161:18: note: ‘active_device’ was previously declared here
161 | GBLDEF io_desc *active_device;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:161:18: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
[ 89%] Built target libyottadb
Scanning dependencies of target dse
Scanning dependencies of target gtcm_pkdisp
Scanning dependencies of target yottadb
Scanning dependencies of target dbcertify
Scanning dependencies of target lke
Scanning dependencies of target mupip
Scanning dependencies of target gtmsecshr_real
[ 89%] Building C object CMakeFiles/dse.dir/sr_unix/dse.c.o
[ 89%] Building C object CMakeFiles/semstat2.dir/sr_unix/semstat2.c.o [ 89%] Building C object CMakeFiles/gtcm_pkdisp.dir/sr_unix_cm/gtcm_pkdisp.c.o
...
RegardsThank you for reporting this. For some reason, the great G is not showing your later post that you are compiling on Gentoo.
– Bhaskar
I just tried building r1.32 on Debian 11, one of the Supported platforms with gcc version 10.2.1 and it compiled without any warnings. There are many Linux distributions, many versions of gcc, and a plethora of compilation flags that control warnings.
Regards
– Bhaskar
warnings. As newer versions of gcc generate more warnings, part of our development activity is to check those warnings, determine which are legitimate (and should be addressed) vs. those which are “check this out” (and should be suppressed with flags)I incorrectly sent the answer to the mailing list from another email, so you did not see it.
Yes I followed instructions for gcc from README.
I'm using Calculate Linux Desktop (Gentoo based distro).
Kernel 5.10.32
As far as I remember, when compiling with an early version gcc 10.2.? (may be 10.2.1), there were also problems.
Sergey.
Hi!
Is that how it should be? Is this normal or am I doing something wrong?
gcc 10.3.0
...Are you following the instructions in the README, or are you trying to compile it yourself with your own gcc flags? gcc flags do matter. Also, which Linux distribution/version are you using? Thank you.
[ 89%] Building C object CMakeFiles/libyottadb.dir/sr_unix/ftok_main.c.o
[ 89%] Linking C shared module libyottadb.so /tmp/tmp/YDB/sr_port/gdsfhead.h:1101:21: warning: type of ‘pin_fail_bt’ does not match original declaration [-Wlto-type-mismatch]
1101 | GBLREF bt_rec_ptr_t pin_fail_bt; /* Pointer to bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:891:21: note: ‘pin_fail_bt’ was previously declared here
891 | GBLDEF bt_rec_ptr_t pin_fail_bt; /* Pointer to bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:891:21: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
/tmp/tmp/YDB/sr_port/gdsfhead.h:1102:16: warning: type of ‘pin_fail_bt_contents’ does not match original declaration [-Wlto-type-mismatch]
1102 | GBLREF bt_rec pin_fail_bt_contents; /* Contents of bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:892:16: note: ‘pin_fail_bt_contents’ was previously declared here
892 | GBLDEF bt_rec pin_fail_bt_contents; /* Contents of bt of the cache-record that we failed to pin */
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:892:16: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
/tmp/tmp/YDB/sr_port/dm_setup.c:20:18: warning: type of ‘gtm_err_dev’ does not match original declaration [-Wlto-type-mismatch]
20 | GBLREF io_desc *gtm_err_dev;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:412:19: note: ‘gtm_err_dev’ was previously declared here
412 | GBLDEF io_desc *gtm_err_dev;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:412:19: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
/tmp/tmp/YDB/sr_port/m_zwrite.c:47:25: warning: type of ‘svn_data’ does not match original declaration [-Wlto-type-mismatch]
47 | LITREF svn_data_type svn_data[];
| ^
/tmp/tmp/YDB/sr_port/expritem.c:147:22: note: ‘svn_data’ was previously declared here
147 | LITDEF svn_data_type svn_data[] =
| ^
/tmp/tmp/YDB/sr_port/op_close.c:27:18: warning: type of ‘active_device’ does not match original declaration [-Wlto-type-mismatch]
27 | GBLREF io_desc *active_device;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:161:18: note: ‘active_device’ was previously declared here
161 | GBLDEF io_desc *active_device;
| ^
/tmp/tmp/YDB/sr_port/gbldefs.c:161:18: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
[ 89%] Built target libyottadb
Scanning dependencies of target dse
Scanning dependencies of target gtcm_pkdisp
Scanning dependencies of target yottadb
Scanning dependencies of target dbcertify
Scanning dependencies of target lke
Scanning dependencies of target mupip
Scanning dependencies of target gtmsecshr_real
[ 89%] Building C object CMakeFiles/dse.dir/sr_unix/dse.c.o
[ 89%] Building C object CMakeFiles/semstat2.dir/sr_unix/semstat2.c.o
[ 89%] Building C object CMakeFiles/gtcm_pkdisp.dir/sr_unix_cm/gtcm_pkdisp.c.o
...
RegardsThank you for reporting this. For some reason, the great G is not showing your later post that you are compiling on Gentoo.
– Bhaskar
I just tried building r1.32 on Debian 11, one of the Supported platforms with gcc version 10.2.1 and it compiled without any warnings. There are many Linux distributions, many versions of gcc, and a plethora of compilation flags that control
I tested compilation with gcc 10.2.0-r5. Same 10 warnings and notices.Regards
– Bhaskar
[ 89%] Building C object CMakeFiles/libyottadb.dir/sr_unix/ftok_main.c.o
[ 89%] Linking C shared module libyottadb.so /tmp/YDB/sr_port/gdsfhead.h:1101:21: warning: type of ‘pin_fail_bt’ does not match original declaration [-Wlto-type-mismatch]
1101 | GBLREF bt_rec_ptr_t pin_fail_bt; /* Pointer to bt of the cache-record that we failed to pin */
| ^
/tmp/YDB/sr_port/gbldefs.c:891:21: note: ‘pin_fail_bt’ was previously declared here
891 | GBLDEF bt_rec_ptr_t pin_fail_bt; /* Pointer to bt of the cache-record that we failed to pin */
| ^
/tmp/YDB/sr_port/gbldefs.c:891:21: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
/tmp/YDB/sr_port/gdsfhead.h:1102:16: warning: type of ‘pin_fail_bt_contents’ does not match original declaration [-Wlto-type-mismatch]
1102 | GBLREF bt_rec pin_fail_bt_contents; /* Contents of bt of the cache-record that we failed to pin */
| ^
/tmp/YDB/sr_port/gbldefs.c:892:16: note: ‘pin_fail_bt_contents’ was previously declared here
892 | GBLDEF bt_rec pin_fail_bt_contents; /* Contents of bt of the cache-record that we failed to pin */
| ^
/tmp/YDB/sr_port/gbldefs.c:892:16: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
/tmp/YDB/sr_port/dm_setup.c:20:18: warning: type of ‘gtm_err_dev’ does not match original declaration [-Wlto-type-mismatch]
20 | GBLREF io_desc *gtm_err_dev;
| ^
/tmp/YDB/sr_port/gbldefs.c:412:19: note: ‘gtm_err_dev’ was previously declared here
412 | GBLDEF io_desc *gtm_err_dev;
| ^
/tmp/YDB/sr_port/gbldefs.c:412:19: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
/tmp/YDB/sr_port/m_zwrite.c:47:25: warning: type of ‘svn_data’ does not match original declaration [-Wlto-type-mismatch]
47 | LITREF svn_data_type svn_data[];
| ^
/tmp/YDB/sr_port/expritem.c:147:22: note: ‘svn_data’ was previously declared here
147 | LITDEF svn_data_type svn_data[] =
| ^
/tmp/YDB/sr_port/op_close.c:27:18: warning: type of ‘active_device’ does not match original declaration [-Wlto-type-mismatch]
27 | GBLREF io_desc *active_device;
| ^
/tmp/YDB/sr_port/gbldefs.c:161:18: note: ‘active_device’ was previously declared here
161 | GBLDEF io_desc *active_device;
| ^
/tmp/YDB/sr_port/gbldefs.c:161:18: note: code may be misoptimized unless ‘-fno-strict-aliasing’ is used
[ 89%] Built target libyottadb
Scanning dependencies of target dbcertify
Scanning dependencies of target dse
Scanning dependencies of target mupip
Sysop: | Keyop |
---|---|
Location: | Huddersfield, West Yorkshire, UK |
Users: | 296 |
Nodes: | 16 (2 / 14) |
Uptime: | 39:57:25 |
Calls: | 6,648 |
Files: | 12,193 |
Messages: | 5,329,408 |