Forum: >>> Magnum BBS <<<

3 bit comparator

From =?UTF-8?B?RMawxqFuZyBExrDGoW5n?=@21:1/5 to All on Sun Mar 28 08:25:28 2021

comparator3bit.vhd:library IEEE;
use IEEE.STD_LOGIC_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;

entity comparator3bit is
port (
p : in std_logic_vector(2 downto 0);
q : in std_logic_vector(2 downto 0);
p_le_q : out std_logic
);
end comparator3bit;

Architecture Behavior of comparator3bit is
begin
process (p, q)
begin
if p<q then p_le_q <= '1';
else p_le_q <= '0';
end if;
end process;
end Behavior;

comparator3bit_tb.vhd:
library IEEE;
use IEEE.STD_LOGIC_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
USE ieee.numeric_std.ALL;

entity comparator3bit_tb is
end comparator3bit_tb;

Architecture tb of comparator3bit_tb is
component comparator3bit_tb is
port ( p : in std_logic_vector(2 downto 0);
q : in std_logic_vector(2 downto 0);
p_le_q : out std_logic);
end component;
signal p,q : std_logic_vector(2 downto 0) := (others => '0');
signal p_le_q : std_logic;
signal i,j : integer;
begin
UUT : entity work.comparator3bit port map (p => p, q => q ,p_le_q => p_le_q);
process
begin
for i in 0 to 8 loop
p <= std_logic_vector(to_unsigned(i+2,3));
q <= std_logic_vector(to_unsigned(i,3));
end loop;
wait;
end process;
end;

When I run the simulation comparator3bit_tb and add the wave then the graph does not show p_le_q output. How to fix thanks

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

From Maurice SAAB@21:1/5 to Maurice SAAB on Mon Mar 29 09:58:49 2021

On 29/03/2021 09:57, Maurice SAAB wrote:

On 28/03/2021 18:25, Dương Dương wrote:

comparator3bit.vhd:library IEEE;
use IEEE.STD_LOGIC_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;

entity comparator3bit is
    port (
        p : in std_logic_vector(2 downto 0);
        q : in std_logic_vector(2 downto 0);
        p_le_q : out std_logic
        );
end comparator3bit;

Architecture Behavior of comparator3bit is
begin
    process (p, q)
    begin
    if p<q then p_le_q <= '1';
    else p_le_q <= '0';
    end if;
    end process;
end Behavior;

comparator3bit_tb.vhd:
library IEEE;
use IEEE.STD_LOGIC_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
USE ieee.numeric_std.ALL;

entity comparator3bit_tb is
end comparator3bit_tb;

Architecture tb of comparator3bit_tb is
    component comparator3bit_tb is
    port ( p : in std_logic_vector(2 downto 0);
        q : in std_logic_vector(2 downto 0);
        p_le_q : out std_logic);
    end component;
    signal p,q : std_logic_vector(2 downto 0) := (others => '0');
    signal p_le_q : std_logic;
    signal i,j : integer;
begin
    UUT : entity work.comparator3bit port map (p => p, q => q ,p_le_q

p_le_q);

    process
    begin
    for i in 0 to 8 loop
        p <= std_logic_vector(to_unsigned(i+2,3));
        q <= std_logic_vector(to_unsigned(i,3));
         end loop;
    wait;
    end process;
end;

When I run the simulation comparator3bit_tb and add the wave then the
graph does not show p_le_q output. How to fix thanks

you should wait for some time after assigning p and q, try this:
for i in 0 to 8 loop
        for i in 0 to 8 loop
        p <= std_logic_vector(to_unsigned(i+2,3));
        q <= std_logic_vector(to_unsigned(i,3));
       end loop;
    wait;
HTH

you should wait for some time after assigning p and q, try this:
for i in 0 to 8 loop
for i in 0 to 8 loop
p <= std_logic_vector(to_unsigned(i+2,3));
q <= std_logic_vector(to_unsigned(i,3));
wait for 100 ns;
end loop;
wait;
HTH

--
Cet email a fait l'objet d'une analyse antivirus par AVG.
http://www.avg.com

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

From Maurice SAAB@21:1/5 to All on Mon Mar 29 09:57:28 2021

On 28/03/2021 18:25, Dương Dương wrote:

comparator3bit.vhd:library IEEE;
use IEEE.STD_LOGIC_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;

entity comparator3bit is
port (
p : in std_logic_vector(2 downto 0);
q : in std_logic_vector(2 downto 0);
p_le_q : out std_logic
);
end comparator3bit;

Architecture Behavior of comparator3bit is
begin
process (p, q)
begin
if p<q then p_le_q <= '1';
else p_le_q <= '0';
end if;
end process;
end Behavior;

comparator3bit_tb.vhd:
library IEEE;
use IEEE.STD_LOGIC_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
USE ieee.numeric_std.ALL;

entity comparator3bit_tb is
end comparator3bit_tb;

Architecture tb of comparator3bit_tb is
component comparator3bit_tb is
port ( p : in std_logic_vector(2 downto 0);
q : in std_logic_vector(2 downto 0);
p_le_q : out std_logic);
end component;
signal p,q : std_logic_vector(2 downto 0) := (others => '0');
signal p_le_q : std_logic;
signal i,j : integer;
begin
UUT : entity work.comparator3bit port map (p => p, q => q ,p_le_q => p_le_q);
process
begin
for i in 0 to 8 loop
p <= std_logic_vector(to_unsigned(i+2,3));
q <= std_logic_vector(to_unsigned(i,3));
end loop;
wait;
end process;
end;

When I run the simulation comparator3bit_tb and add the wave then the graph does not show p_le_q output. How to fix thanks

you should wait for some time after assigning p and q, try this:
for i in 0 to 8 loop
for i in 0 to 8 loop
p <= std_logic_vector(to_unsigned(i+2,3));
q <= std_logic_vector(to_unsigned(i,3));
end loop;
wait;
HTH

--
Cet email a fait l'objet d'une analyse antivirus par AVG.
http://www.avg.com

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

From Charles Bailey@21:1/5 to All on Thu Apr 1 21:33:59 2021

On 2021-03-28 10:25, Dương Dương wrote:

comparator3bit.vhd:library IEEE;
use IEEE.STD_LOGIC_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;

entity comparator3bit is
port (
p : in std_logic_vector(2 downto 0);
q : in std_logic_vector(2 downto 0);
p_le_q : out std_logic
);
end comparator3bit;

Architecture Behavior of comparator3bit is
begin
process (p, q)
begin
if p<q then p_le_q <= '1';
else p_le_q <= '0';
end if;
end process;
end Behavior;

comparator3bit_tb.vhd:
library IEEE;
use IEEE.STD_LOGIC_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
USE ieee.numeric_std.ALL;

entity comparator3bit_tb is
end comparator3bit_tb;

Architecture tb of comparator3bit_tb is
component comparator3bit_tb is
port ( p : in std_logic_vector(2 downto 0);
q : in std_logic_vector(2 downto 0);
p_le_q : out std_logic);
end component;
signal p,q : std_logic_vector(2 downto 0) := (others => '0');
signal p_le_q : std_logic;
signal i,j : integer;
begin
UUT : entity work.comparator3bit port map (p => p, q => q ,p_le_q => p_le_q);
process
begin
for i in 0 to 8 loop
p <= std_logic_vector(to_unsigned(i+2,3));
q <= std_logic_vector(to_unsigned(i,3));
end loop;
wait;
end process;
end;

When I run the simulation comparator3bit_tb and add the wave then the graph does not show p_le_q output. How to fix thanks

Main problem: your FOR loop doesn't advance simulation time with each iteration. Your whole simulation completes in 0 ps. Put a WAIT
statement, such as "wait for 20 ns;" before the "end loop;"

A few other comments:
Remove the references to the std_logic_arith and std_logic_unsigned
packages. Those are non-standard packages that came from Synopsys, not
IEEE, and are considered deprecated. Plus, you are not actually using
them anyway.

Because your testbench uses entity instantiation for comparator3bit, you
don't need the component definition for it.

Charles Bailey

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

Who's Online

System Info

Sysop:	Keyop
Location:	Huddersfield, West Yorkshire, UK
Users:	292
Nodes:	16 (2 / 14)
Uptime:	207:35:24
Calls:	6,618
Files:	12,168
Messages:	5,317,007

3 bit comparator

Who's Online

System Info