1. Forum
  2. Usenet
  3. COMP.LANG.CLIPPER

  • Deseperately looking for Blinker3.3

    From roberto.mahave@gmail.com@21:1/5 to All on Sun Jun 16 18:23:46 2019
    Hi all

    Can't find my original media of Blinker3.3 (I licensed it ~30 years ago) and need to rebuild a big Clipper5.2 project that was linked with that version. BlinkInc is out of business and haven't been able to find that sw.

    Any hints ?

    Cheers from Chile !

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Johan Nel@21:1/5 to robert...@gmail.com on Sun Jun 16 22:27:50 2019
    On Monday, June 17, 2019 at 3:23:47 AM UTC+2, robert...@gmail.com wrote:
    Hi all

    Can't find my original media of Blinker3.3 (I licensed it ~30 years ago) and need to rebuild a big Clipper5.2 project that was linked with that version. BlinkInc is out of business and haven't been able to find that sw.

    Any hints ?

    Cheers from Chile !

    Good day Robert,

    Hmmm that might be an issue. The closest I can suggest is to look at harbour as an alternative compiler for the interim. In the long run, I would suggest you look at XSharp.

    Good luck,

    Johan Nel
    FOX member: Friends of XSharp
    https://xsharp.info
    George, South Africa

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From dlzc@21:1/5 to robert...@gmail.com on Mon Jun 17 07:22:53 2019
    Dear robert...:

    On Sunday, June 16, 2019 at 6:23:47 PM UTC-7, robert...@gmail.com wrote:
    Hi all

    Can't find my original media of Blinker3.3 (I licensed it
    ~30 years ago) and need to rebuild a big Clipper5.2
    project that was linked with that version. BlinkInc is out
    of business and haven't been able to find that sw.

    Any hints ?

    Blinker appears to be unobtainium. This appears to be an "alternative", and I have not tried it:
    http://www.devoresoftware.com/freesource/cwsrc.htm

    Harbour or xHarbour should accept your code with few modifications (xHarbour should be fewest), and you will have a 32-bit Windows console application when you are done. There is a newsgroup for xHarbour: comp.lang.xharbour, and there is a UDF that you
    can locate there for swpruncmd, if your code uses it.
    http://www.xharbour.org/

    David A. Smith

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From RTMN@21:1/5 to All on Mon Jun 17 07:20:12 2019
    I can email it to you.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From RTMN@21:1/5 to All on Mon Jun 17 07:22:32 2019
    Hi Robert , I have it. I can send to you.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From RTMN@21:1/5 to Roberto Mahave on Mon Jun 17 13:31:33 2019
    On Monday, June 17, 2019 at 5:17:52 PM UTC-3, Roberto Mahave wrote:
    On Monday, June 17, 2019 at 10:22:33 AM UTC-4, RTMN wrote:
    Hi Robert , I have it. I can send to you.

    Yes pleeeeeeeease !!!

    -R

    https://www.4shared.com/s/fNS6dCyMsgm

    Reply when you finished the download , and I will delete it.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Roberto Mahave@21:1/5 to RTMN on Mon Jun 17 13:17:51 2019
    On Monday, June 17, 2019 at 10:22:33 AM UTC-4, RTMN wrote:
    Hi Robert , I have it. I can send to you.

    Yes pleeeeeeeease !!!

    -R

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Roberto Mahave@21:1/5 to All on Mon Jun 17 18:29:19 2019
    Got it .. Thank you !
    It just did some brief tests and appears to work fine. Tomorrow I'll try to rebuild the entire project.
    I'm grateful beyond words.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From AnthonyL@21:1/5 to dlzc on Tue Jun 18 11:31:13 2019
    On Mon, 17 Jun 2019 07:22:53 -0700 (PDT), dlzc <dlzc1@cox.net> wrote:

    Dear robert...:

    On Sunday, June 16, 2019 at 6:23:47 PM UTC-7, robert...@gmail.com wrote:
    Hi all
    =20
    Can't find my original media of Blinker3.3 (I licensed it
    ~30 years ago) and need to rebuild a big Clipper5.2
    project that was linked with that version. BlinkInc is out
    of business and haven't been able to find that sw.
    =20
    Any hints ?

    Blinker appears to be unobtainium. This appears to be an "alternative", an= >d I have not tried it:
    http://www.devoresoftware.com/freesource/cwsrc.htm


    The link refers to Warplink.

    Some while back I ended up using Warplink - not sure why because I'm
    fairly sure at the time that I had the relevant version of Blink
    around but I ended up preferring Warplink and if memory serves me
    right it was a good sight faster.


    --
    AnthonyL

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From bzeurunkl@gmail.com@21:1/5 to robert...@gmail.com on Thu Aug 1 07:07:56 2019
    On Sunday, June 16, 2019 at 8:23:47 PM UTC-5, robert...@gmail.com wrote:
    Hi all

    Can't find my original media of Blinker3.3 (I licensed it ~30 years ago) and need to rebuild a big Clipper5.2 project that was linked with that version. BlinkInc is out of business and haven't been able to find that sw.

    Any hints ?

    Cheers from Chile !

    I think I may still have my Blinker installed files laying about somewhere. Not sure what version it is. I can check if you like.

    reply here, or to Kirby LW AT yahoo dot com

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Roberto Mahave@21:1/5 to All on Wed Aug 7 14:45:20 2019
    I got Blinker 3.3 and was able to rebuild my project. Thank you anyway !

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From lcandia_2007@21:1/5 to All on Thu Aug 8 05:45:17 2019
    search vetusware.com there are several versions, but not the 3.3

    Cheers from Chile !

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From prkell@gmail.com@21:1/5 to All on Tue Jul 14 07:56:44 2020
    Em domingo, 16 de junho de 2019 22:23:47 UTC-3, robert...@gmail.com escreveu:
    Hi all

    Can't find my original media of Blinker3.3 (I licensed it ~30 years ago) and need to rebuild a big Clipper5.2 project that was linked with that version. BlinkInc is out of business and haven't been able to find that sw.

    Any hints ?

    Cheers from Chile !

    I HAVE A COPY OF BLINKER 3.2, maybe it works for you
    do you have SoulSeekQT? you can reach BLINKER AND OTHER LINKER with this P2P applicattion

    Write to me PRKELL@GMAIL.COM

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)