On Thursday, December 13, 2012 at 6:34:19 AM UTC-8,
bln...@googlemail.com wrote:
(snip)
I found the example of SFD detection from OpenCores.org of the EtherMac project,
but i dont have any verilog or vhdl knowledge.
If you can understand digital logic, how it is wired together, for example in thinking about how to wire together 7400 series ICs, you will have an easy time learning either Verilog or VHDL.
Think in terms of wires and gates, write in either HDL.
Thatswhy i wanted to use the Xilinx ISE Schematic tool and some fast logic.
So can you help me by giving me some advice how to make use of some fast logic.
Do i need some FIFOs oder Latches?
Once you know one of Verilog and VHDL, you will almost be able to read the other.
Then learn just a little about the other, and you can easily read it, too.
-- glen
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)