1. Forum
  2. Usenet
  3. COMP.DCOM.SDH-SONET

  • Ms and Rs connection functions application

    From e.bagherzadeh72@gmail.com@21:1/5 to All on Mon Apr 16 03:26:07 2018
    Hi,
    In G.783 is mentioned that Rs and Ms connection functions are not applicable. I'd wonder why they are defined at all!
    Best Regards,
    Elnaz

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Huub van Helvoort@21:1/5 to All on Mon Apr 16 22:45:00 2018
    Hello Elnaz,

    You wonder:

    In G.783 is mentioned that Rs and Ms connection functions are
    not applicable. I'd wonder why they are defined at all!

    They are defined to match the generic functional model where
    between an adaptation function connection point and a termination
    function connection point there is always a connection function.

    In general the MS and RS connection function are simple point
    to point connections which do not have to be managed.
    So, from a management point of view they are not applicable.

    Best regards, Huub.


    --
    reply to hhelvooort with 2 'o's ================================================================
    http://www.van-helvoort.eu/ ================================================================
    Always remember that you are unique...just like everyone else...

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From e.bagherzadeh72@gmail.com@21:1/5 to Huub van Helvoort on Wed Apr 18 05:39:42 2018
    On Tuesday, April 17, 2018 at 1:15:01 AM UTC+4:30, Huub van Helvoort wrote:
    Hello Elnaz,

    You wonder:

    In G.783 is mentioned that Rs and Ms connection functions are
    not applicable. I'd wonder why they are defined at all!

    They are defined to match the generic functional model where
    between an adaptation function connection point and a termination
    function connection point there is always a connection function.

    In general the MS and RS connection function are simple point
    to point connections which do not have to be managed.
    So, from a management point of view they are not applicable.

    Best regards, Huub.


    --
    reply to hhelvooort with 2 'o's ================================================================
    http://www.van-helvoort.eu/ ================================================================
    Always remember that you are unique...just like everyone else...

    thank you so much for your reply,
    I have another question,
    Can be used Rs connection function as regenerator mode?
    Best regards,
    Elnaz

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Huub van Helvoort@21:1/5 to You on Thu Apr 19 17:49:15 2018
    Hello Elnaz,

    You write:

    I have another question,
    Can be used Rs connection function as regenerator mode?

    Yes, that is possible. See ITU-T recommendation G.783
    Figure III.1/G.783 – STM-16 regenerator model

    (this is also applicable to any STM-N)

    Kind regards, Huub.



    --
    reply to hhelvooort with 2 'o's ================================================================
    http://www.van-helvoort.eu/ ================================================================
    Always remember that you are unique...just like everyone else...

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)