• OT: plug and pray webcam on windows xp

    From Dimiter_Popoff@21:1/5 to All on Fri Jun 10 03:09:44 2022
    Moments ago I posted this only to SED, then remembered the chances
    someone could help here are perhaps higher (unless the groups overlapp completely nowadays....). Anyway, separate post but same, here it goes:

    A somewhat moronic question but well, perhaps someone has been there
    and done it.
    My old (also external) webcam which I use in order to look at my lab
    when I am not there (USB connected to an old xp laptop) began to lose
    its presence at times (gets back on app restart but well, I need it to
    work when I am not there).
    So I got a new one,
    https://natec-zone.com/product/lori .

    Wasted me a whole day today and no chance for xp to recognize it.
    On the windows 10 laptop it just works; on the xp it stays unrecognized.
    I tried all the obvious, installed various drivers etc., nothing.
    Found a much longer version of upnphosts.dll (something like 300k,
    mine was 182 or so), nothing.
    I guess I'll give up on it and get another but... it does claim to work
    with XP. Haven't tried to talk to the makers, I already wasted enough
    time on that as it is.
    So if by some chance someone knows something I can try - some particular
    driver etc. - please help. I am far from a windows freak, I can manage
    little more than what is obvious to me.
    The windows xp is 32 bit as far as I can tell, the laptop is acer
    extensa 5630Z (has no inbuilt camera, it is > 10 years old and its
    main - if not sole - function is to operate the camera.....).
    I know there are many alternative ways to do it, but it would be
    nice if this thing would eventually work.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Dave Nadler@21:1/5 to All on Wed Jun 22 11:16:56 2022
    On 6/9/2022 8:09 PM, Dimiter_Popoff wrote:
    Moments ago I posted this only to SED, then remembered the chances
    someone could help here are perhaps higher (unless the groups overlapp completely nowadays....). Anyway, separate post but same, here it goes:

    A somewhat moronic question but well, perhaps someone has been there
    and done it.
    My old (also external) webcam which I use in order to look at my lab
    when I am not there (USB connected to an old xp laptop) began to lose
    its presence at times (gets back on app restart but well, I need it to
    work when I am not there).
    So I got a new one,
    https://natec-zone.com/product/lori .

    Wasted me a whole day today and no chance for xp to recognize it.
    On the windows 10 laptop it just works; on the xp it stays unrecognized.
    I tried all the obvious, installed various drivers etc., nothing.
    Found a much longer version of upnphosts.dll (something like 300k,
    mine was 182 or so), nothing.
    I guess I'll give up on it and get another but... it does claim to work
    with XP. Haven't tried to talk to the makers, I already wasted enough
    time on that as it is.
    So if by some chance someone knows something I can try - some particular driver etc. - please help. I am far from a windows freak, I can manage
    little more than what is obvious to me.
    The windows xp is 32 bit as far as I can tell, the laptop is acer
    extensa 5630Z (has no inbuilt camera, it is > 10 years old and its
    main - if not sole - function is to operate the camera.....).
    I know there are many alternative ways to do it, but it would be
    nice if this thing would eventually work.

    Hi Dimiter - I'm cleaning out my basement and find a set of unused
    Logitech Orbit USB cameras for XP. I was about to toss them into
    electronics recycling - yours if you want them!
    Thankfully I have only one Windows XP VM remaining which I must use to
    support an old product - and no camera needs!
    See ya, Dave

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Dimiter_Popoff@21:1/5 to Dave Nadler on Wed Jun 22 23:01:21 2022
    On 6/22/2022 18:16, Dave Nadler wrote:
    On 6/9/2022 8:09 PM, Dimiter_Popoff wrote:
    Moments ago I posted this only to SED, then remembered the chances
    someone could help here are perhaps higher (unless the groups overlapp
    completely nowadays....). Anyway, separate post but same, here it goes:

    A somewhat moronic question but well, perhaps someone has been there
    and done it.
    My old (also external) webcam which I use in order to look at my lab
    when I am not there (USB connected to an old xp laptop) began to lose
    its presence at times (gets back on app restart but well, I need it to
    work when I am not there).
    So I got a new one,
    https://natec-zone.com/product/lori .

    Wasted me a whole day today and no chance for xp to recognize it.
    On the windows 10 laptop it just works; on the xp it stays unrecognized.
    I tried all the obvious, installed various drivers etc., nothing.
    Found a much longer version of upnphosts.dll (something like 300k,
    mine was 182 or so), nothing.
    I guess I'll give up on it and get another but... it does claim to work
    with XP. Haven't tried to talk to the makers, I already wasted enough
    time on that as it is.
    So if by some chance someone knows something I can try - some particular
    driver etc. - please help. I am far from a windows freak, I can manage
    little more than what is obvious to me.
    The windows xp is 32 bit as far as I can tell, the laptop is acer
    extensa 5630Z (has no inbuilt camera, it is > 10 years old and its
    main - if not sole - function is to operate the camera.....).
    I know there are many alternative ways to do it, but it would be
    nice if this thing would eventually work.

    Hi Dimiter - I'm cleaning out my basement and find a set of unused
    Logitech Orbit USB cameras for XP. I was about to toss them into
    electronics recycling - yours if you want them!
    Thankfully I have only one Windows XP VM remaining which I must use to support an old product - and no camera needs!
    See ya, Dave

    Thanks David, really appreciated, but there is no need.
    I wanted to replace the misbehaving camera for nostalgic reasons
    (nostalgia related to the person because of whom I started using
    it some 7 years ago in that mode). Now this camera behaves again,
    has behaved for over a week (you tell me how come, was it the
    camera or the xp laptop which has practically no other function).
    And I connected the newly bought one to the 10 laptop, its view
    duplicates - at higher quality - the view of the old one...
    All this is just to keep me calm when out, we used to
    not leave the house unattended unless really unavoidable (like
    going to a hospital or the like). I could get some IP cameras but
    these won't change much if anything, what am I going to do in case
    I see what I don't want to see any different what I would do now.

    Dimiter

    http://www.flickr.com/photos/didi_tgi/

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)