• decoupling the ADC reference on 16F15344

    From Johann Klammer@21:1/5 to All on Sun Nov 7 16:27:34 2021
    Hello,

    I would like to know if there's a way to output the internal
    adc vref(1.024 or 2.048 V) onto the vref+ pin, to attach an external
    decoupling capacitor. The Datasheet is a bit unclear on this.
    There's a bit to connect the ext aref pin from adc vref, but I think
    that just uses vhatever voltage is there externally.
    (ADPREF in ADCON1). There's also the DAC1OE2 bit in DAC1CON0,
    but they don't really say on what pin that shows up.
    DAC1OUT2 is not in the pin list.

    Regards,
    Johann

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)