• Telnettable PCBoard under Windows?

    From dreaded@21:1/5 to Tech Bio Research on Sun Aug 27 09:03:45 2017
    On Sun, 27 Aug 2017 08:30:35 -0500, dreaded <dreaded@none.com> wrote:

    Found this in an old post by Dane Beko-

    On 15 Dec 2007, Tech Bio Research <tchbiorsrch@sbcglobal.net> wrote to
    All:

    Yes but how do i do it??

    Assign your BBS computer a static IP; open port 23 on your router and
    point to
    the computer with the static IP. That way, when a caller telnets to
    your DSL
    or cable IP, your router will bounce the call to the computer that's
    been
    designated to receive telnet calls (on port 23).

    Go to www.netfoss.com and download NetFoss 1.0. In the README file,
    there are
    instructions on how to configure NetFoss to work with PcBoard. Net2BBS
    is the
    telnet server that comes with NetFoss. I bring up Net2BBS and it
    reads the
    NET2BBS.INI file that you need to edit for your configuration. When a
    telnet
    caller arrives, Net2BBS calls PcBoard with a batch file:

    d:\netfoss\nf.bat /n*N /h*H C:\pcb\pcboard.bat *N

    The NF.BAT file is:

    === Cut ===
    @echo off
    d:\netfoss\netfoss.com %1
    rem ** If running a non-door32.sys system, add a " %1" to end of
    above
    line **
    if errorlevel 1 goto end
    d:\netfoss\netcom.exe %1 %2 %3 %4 %5 %6 %7 %8 %9
    d:\netfoss\netfoss.com /u
    :end
    === Cut ===

    The PCBOARD.BAT file is:

    === Cut ===
    @ECHO OFF
    CLS
    SET PCB=/NODE:%1 /PORT1F:
    SET PCBDRIVE=C:
    SET PCBDIR=\PCB\NODE%1
    SET PCBDAT=C:\PCB\PCBOARD.DAT
    SET NODE=%1
    :top
    %pcbdrive%
    cd %pcbdir%
    if exist remote.bat REN remote.bat remote.sys
    if exist door.bat DEL door.bat
    if exist endpcb DEL endpcb
    c:\pcb\pcboardm /file:%pcbdat% /C:115200
    if exist remote.bat CALL remote.bat
    if exist door.bat CALL door.bat
    if exist event.bat CALL event.bat
    if NOT exist endpcb GOTO top
    :end
    === Cut ===

    In PCBSETUP, you tell PcBoard not to use a modem but rather a fossil
    driver
    (hence the /PORT1F: on the 3rd line of the pcboard.bat file); you also
    need to
    tell PcBoard to drop to DOS after each call (part of PCBSETUP).

    That's it. PcBoard loads with the command line "cP\pcb\pcboardm
    /file:%pcbdat%
    /C:115200 (the C:115200 tells PcBoard that the caller is already
    online).

    Works like a charm. :-)


    FamilyNet <> Internet Gated Mail
    http://www.familynet-international.org



    Has ayone accomplished this?

    Any PCBoard sysops left out there at all? ;-)

    -=DrEaDeD=-
    Providing a public service for a.b.s.u since 1929!

    -=DrEaDeD=-
    Providing a public service for a.b.s.u since 1929!

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From dreaded@21:1/5 to All on Sun Aug 27 08:30:35 2017
    Has ayone accomplished this?

    Any PCBoard sysops left out there at all? ;-)

    -=DrEaDeD=-
    Providing a public service for a.b.s.u since 1929!

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)