• testing netmail

    From ogg@21:2/147 to 21:2/100 on Wed Jun 29 11:31:33 2022
    Hi Todd!
    I've sent a few netmails in the past month with no response to other boards. I'm beginning to think it may be something on my end.

    Could you be kind enough and just reply to this to let me know if you got it? That would rule out some things on my end.

    By the way, everything else seems to be working great on this end with the polling, etc.

    Scott

    Sysop, Altair IV BBS
    Lufkin, TX
    fsxnet: 21:2/147

    --- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)
    * Origin: Altair IV BBS (21:2/147)
  • From nblade@21:3/170 to ogg on Wed Jun 29 18:17:10 2022
    It doesn't seem like you sent a proper netmail. This ended up in a message base. I'll see about sending you one from my board and you can try to reply to that.

    ... I think I am, therefore, I am... I think.

    --- Mystic BBS v1.12 A47 2021/12/24 (Linux/64)
    * Origin: RVs and RPGs BBS (21:3/170)
  • From ogg@21:2/147 to nblade on Wed Jun 29 12:35:38 2022
    On 29 Jun 2022, nblade said the following...

    It doesn't seem like you sent a proper netmail. This ended up in a
    message base. I'll see about sending you one from my board and you can
    try to reply to that.

    ... I think I am, therefore, I am... I think.

    --- Mystic BBS v1.12 A47 2021/12/24 (Linux/64)
    * Origin: RVs and RPGs BBS (21:3/170)

    This may explain some issues I've been having.

    ogg

    Sysop, Altair IV BBS
    Lufkin, TX
    fsxnet: 21:2/147

    ... One tequila, two tequila, three tequila, floor.

    --- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)
    * Origin: Altair IV BBS (21:2/147)
  • From Gamgee@21:2/138 to ogg on Wed Jun 29 12:34:00 2022
    ogg wrote to 21:2/100 <=-

    Hi Todd!
    I've sent a few netmails in the past month with no response to
    other boards. I'm beginning to think it may be something on my
    end.

    Could you be kind enough and just reply to this to let me know if
    you got it? That would rule out some things on my end.

    By the way, everything else seems to be working great on this end
    with the polling, etc.

    This appeared in the (public) echomail area, not a (private) netmail,
    just FYI...


    ... Gone crazy, be back later, please leave message.
    === MultiMail/Linux v0.52
    --- SBBSecho 3.15-Linux
    * Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (21:2/138)
  • From ogg@21:2/147 to Gamgee on Wed Jun 29 14:55:51 2022
    On 29 Jun 2022, Gamgee said the following...

    ogg wrote to 21:2/100 <=-

    Hi Todd!
    I've sent a few netmails in the past month with no response to
    other boards. I'm beginning to think it may be something on my
    end.

    Could you be kind enough and just reply to this to let me know if
    you got it? That would rule out some things on my end.

    By the way, everything else seems to be working great on this end with the polling, etc.

    This appeared in the (public) echomail area, not a (private) netmail, just FYI...


    ... Gone crazy, be back later, please leave message.
    === MultiMail/Linux v0.52
    --- SBBSecho 3.15-Linux
    * Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (21:2/138)

    Thanks for the notice. I'm currently trying to figure what/how it happened! ogg

    Sysop, Altair IV BBS
    Lufkin, TX
    fsxnet: 21:2/147

    ... Hard work never killed anyone but why take a risk?

    --- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)
    * Origin: Altair IV BBS (21:2/147)
  • From deon@21:2/116 to ogg on Thu Jun 30 11:48:50 2022
    Re: testing netmail
    By: ogg to 21:2/100 on Wed Jun 29 2022 11:31 am

    I've sent a few netmails in the past month with no response to other boards. I'm beginning to think it may be something on my
    end.

    If you want to test netmail is working, then you can send a ping to my BBS ping@21:2/116 or Hub 3 ping@21:3/100 and a bot will respond.

    If you dont get a response, I can check if I received it and that might help track down where the issue might be.


    ...лоеп
    --- SBBSecho 3.15-Linux
    * Origin: I'm playing with ANSI+videotex - wanna play too? (21:2/116)
  • From ogg@21:2/147 to deon on Wed Jun 29 21:22:14 2022
    On 30 Jun 2022, deon said the following...

    Re: testing netmail
    By: ogg to 21:2/100 on Wed Jun 29 2022 11:31 am

    I've sent a few netmails in the past month with no response to other bo
    I'm beginning to think it may be something on my
    end.

    If you want to test netmail is working, then you can send a ping to my
    BBS ping@21:2/116 or Hub 3 ping@21:3/100 and a bot will respond.

    If you dont get a response, I can check if I received it and that might help track down where the issue might be.


    ...лоеп
    --- SBBSecho 3.15-Linux
    * Origin: I'm playing with ANSI+videotex - wanna play too? (21:2/116)

    Thanks!
    Scott

    Sysop, Altair IV BBS
    Lufkin, TX
    fsxnet: 21:2/147

    --- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)
    * Origin: Altair IV BBS (21:2/147)
  • From ACMEBBS@21:4/10 to ogg on Thu Jun 30 05:03:00 2022
    On Wed Jun 29 11:31:00 2022, ogg wrote to 21:2/100 <=-

    Hi Todd!
    I've sent a few netmails in the past month with no response to other boards.
    I'm beginning to think it may be something on my end.

    Could you be kind enough and just reply to this to let me know if you got it?
    That would rule out some things on my end.

    By the way, everything else seems to be working great on this end with the polling, etc.

    Scott

    Sysop, Altair IV BBS
    Lufkin, TX
    fsxnet: 21:2/147

    --- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)
    * Origin: Altair IV BBS (21:2/147)
    ю Synchronet ю fsxNet FTN<>QWK Gateway

    Got it here in Oregon in QWK.


    ... You summoned a WHAT with the Necronomicon?!
    === TitanMail/winnt v1.1.6
    --- SBBSecho 3.06-Win32
    * Origin: fsxNet FTN<>QWK Gateway (21:4/10)
  • From Geri Atricks@21:4/102 to ogg on Wed Jun 29 22:56:51 2022
    Do you have a seperate message area setup for netmail? I think you need one for each network you are a part of. In the message board setting for that area make sure you have TYPE set aws Netmail, and the PRIVATE MSG switch set to yes.

    -Dallas

    p.s. Have you watched the video on youtube about how to setup netmail on Mystic?

    --- Mystic BBS v1.12 A47 2021/09/29 (Windows/64)
    * Origin: Legends of Yesteryear (furmenservices.net:23322) (21:4/102)
  • From ogg@21:2/147 to Geri Atricks on Thu Jun 30 09:25:26 2022
    On 29 Jun 2022, Geri Atricks said the following...

    Do you have a seperate message area setup for netmail? I think you need one for each network you are a part of. In the message board setting for that area make sure you have TYPE set aws Netmail, and the PRIVATE MSG switch set to yes.
    That appears to be my problem. I've corrected it!

    -Dallas

    p.s. Have you watched the video on youtube about how to setup netmail on Mystic?
    That's the first thing I did! Avon comes through again!

    --- Mystic BBS v1.12 A47 2021/09/29 (Windows/64)
    * Origin: Legends of Yesteryear (furmenservices.net:23322) (21:4/102)

    Thanks for the notes. I think I've got it figured out now.

    ogg

    Sysop, Altair IV BBS
    Lufkin, TX
    fsxnet: 21:2/147

    ... There is an exception to every rule, except this one.

    --- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)
    * Origin: Altair IV BBS (21:2/147)
  • From Accession@21:1/200 to Geri Atricks on Thu Jun 30 12:24:14 2022
    On 29 Jun 2022, Geri Atricks said the following...

    Do you have a seperate message area setup for netmail? I think you need one for each network you are a part of.

    For the record, with Mystic you can use one netmail area for all networks. Just as well, you can have a separate one for each network if you want to.

    Regards,
    Nick

    --- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)
    * Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (21:1/200)
  • From ogg@21:2/147 to Accession on Thu Jun 30 17:19:08 2022
    On 30 Jun 2022, Accession said the following...

    On 29 Jun 2022, Geri Atricks said the following...

    Do you have a seperate message area setup for netmail? I think you ne one for each network you are a part of.

    For the record, with Mystic you can use one netmail area for all
    networks. Just as well, you can have a separate one for each network if you want to.

    Regards,
    Nick

    --- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)
    * Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (21:1/200)

    I only had one area for netmail. I changed it to two in the hopes that was the issue. If it's not, I'll be at it again!

    ogg

    Sysop, Altair IV BBS
    Lufkin, TX
    fsxnet: 21:2/147

    ... I wish life had a scroll-back buffer.

    --- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)
    * Origin: Altair IV BBS (21:2/147)
  • From Accession@21:1/200 to ogg on Fri Jul 1 07:20:03 2022
    On 30 Jun 2022, ogg said the following...

    I only had one area for netmail. I changed it to two in the hopes that was the issue. If it's not, I'll be at it again!

    --- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)

    You're running the latest version, so there's no issue with one netmail area whatsoever. Since it's not letting me copy/paste, I can try to give you a short version of my netmail area's config:

    Name: Netmail
    Base Type: Netmail
    Newsgroup: Netmail
    QWK Name: NETMAIL
    Echo Tag: NETMAIL
    FIle Name: netmail
    Path: /home/user/mystic/msgs
    List ACS: s20(g2|g3|g4|g5|g6)
    Read ACS: s20(g2|g3|g4|g5|g6)
    Post ACS: s20(g2|g3|g4|g5|g6)
    Sysop ACS: s255(g2|g3|g4|g5|g6)

    Net Address: 0:0/0 (Local Address)
    Export To: 3 node(s)

    That should get you started. Take note on the last one above, you're exporting to every uplink's individual address for each network with AKA matching. And list, read, post, and sysop ACS should include every group that is an echomail network that includes a netmail area (g1 here is my Local areas, so not needed).

    Hope that helps!

    Regards,
    Nick

    --- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)
    * Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (21:1/200)
  • From ogg@21:2/147 to Accession on Fri Jul 1 08:14:27 2022
    On 01 Jul 2022, Accession said the following...

    On 30 Jun 2022, ogg said the following...

    I only had one area for netmail. I changed it to two in the hopes t was the issue. If it's not, I'll be at it again!

    --- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)

    You're running the latest version, so there's no issue with one netmail area whatsoever. Since it's not letting me copy/paste, I can try to give you a short version of my netmail area's config:

    Name: Netmail
    Base Type: Netmail
    Newsgroup: Netmail
    QWK Name: NETMAIL
    Echo Tag: NETMAIL
    FIle Name: netmail
    Path: /home/user/mystic/msgs
    List ACS: s20(g2|g3|g4|g5|g6)
    Read ACS: s20(g2|g3|g4|g5|g6)
    Post ACS: s20(g2|g3|g4|g5|g6)
    Sysop ACS: s255(g2|g3|g4|g5|g6)

    Net Address: 0:0/0 (Local Address)
    Export To: 3 node(s)

    That should get you started. Take note on the last one above, you're exporting to every uplink's individual address for each network with AKA matching. And list, read, post, and sysop ACS should include every group that is an echomail network that includes a netmail area (g1 here is my Local areas, so not needed).

    Hope that helps!

    Regards,
    Nick

    --- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)
    * Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (21:1/200)

    I'll give that a try, thanks!

    ogg

    Sysop, Altair IV BBS
    Lufkin, TX
    fsxnet: 21:2/147

    --- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)
    * Origin: Altair IV BBS (21:2/147)
  • From nblade@21:3/170 to ogg on Fri Jul 1 14:30:23 2022
    Looks like you are running Mystic. What is your Netmail Message Base set for?

    I know my area is set for the following for some key fields

    Base type : Netmail
    Net Address : Which is my Net Address
    Export To : set to export to my FSXNet Hub

    If I had to guess one of those is set right for your base, because when you post to that message base, after you enter a To: it should ask you for the node adresss.

    Actually I just thought about it, since we did exchnage netmail when I sent you one. You are posting to Netmail when you try to send one out right? Because you can't send netmail to/from an echomail group only the netmail group.

    ... Fer sell cheep: BBS spel chekker. Wurks grate.

    --- Mystic BBS v1.12 A47 2021/12/24 (Linux/64)
    * Origin: RVs and RPGs BBS (21:3/170)
  • From ogg@21:2/147 to nblade on Fri Jul 1 10:53:16 2022

    If I had to guess one of those is set right for your base, because when you post to that message base, after you enter a To: it should ask you
    for the node adresss.

    Actually I just thought about it, since we did exchnage netmail when I sent you one. You are posting to Netmail when you try to send one out right? Because you can't send netmail to/from an echomail group only the netmail group.

    That may be the problem. I might not have checked the area I was in.
    I'm going to let things settle down for a while to see if what I've done is working. I've been getting a lot of suggestions that have made sense and am working through them.

    Thanks for the help!

    ogg

    Sysop, Altair IV BBS
    Lufkin, TX
    fsxnet: 21:2/147

    ... Multitasking: Reading in the bathroom

    --- Mystic BBS v1.12 A48 2022/04/26 (Linux/64)
    * Origin: Altair IV BBS (21:2/147)