• Hatch/Auto-hatch information

    From Underminer@21:4/103 to FSXNet.FSX_MYS on Wed May 12 17:57:47 2021
    Hello all,
    Is there a source with a bit more information on how hatching and the auto hatch feature work in mystic?
    I setup an ini with autohatch enabled and a couple areas listed. When I run mutil it claims to be hatching, but no tic/flo files are produced.
    Also I'm unclear from the wiki, do you have to provide a filename or filespec in addition to the filebase/echotag for it to work appropriately? Is this part of my issue?

    Many thanks
    --- SBBSecho 3.14-Linux
    * Origin: The Undermine - bbs.undermine.ca (21:4/103)
  • From Al@21:4/106.1 to Underminer on Wed May 12 17:33:15 2021
    Re: Hatch/Auto-hatch information
    By: Underminer to FSXNet.FSX_MYS on Wed May 12 2021 05:57 pm

    I setup an ini with autohatch enabled and a couple areas listed. When I run mutil it claims to be hatching, but no tic/flo files are produced.

    I have not used the autohatch feature, so I'm not sure about that.

    When mutil tosses files to other nodes it always puts them (the file and the tic) in the target nodes filebox. So each node you want to send files to needs to have a filebox or it fails.

    Files and tics are not added to the BSO, the BSO is not used for files and tics, just the filebox.

    Ttyl :-),
    Al

    ... Luxuriantly hand-crafted from only the finest ASCII.
    --- SBBSecho 3.14-Linux
    * Origin: The Rusty MailBox - Penticton, BC Canada (21:4/106.1)
  • From Underminer@21:4/103 to All on Wed May 12 19:59:16 2021

    I setup an ini with autohatch enabled and a couple areas listed. When I run mutil it claims to be hatching, but no tic/flo files are produced.

    I have not used the autohatch feature, so I'm not sure about that.

    When mutil tosses files to other nodes it always puts them (the file and the tic) in the target nodes filebox. So each node you want to send files to needs to have a filebox or it fails.

    Files and tics are not added to the BSO, the BSO is not used for files and tics, just the filebox.


    AHA! That's probably where the problem is. I have not configured fileboxes.
    --- SBBSecho 3.14-Linux
    * Origin: The Undermine - bbs.undermine.ca (21:4/103)
  • From Underminer@21:4/103 to All on Thu May 13 02:45:48 2021
    On Wed, 12 May 2021 19:59:16 -0600
    "Underminer" <underminer@bbs.undermine.ca> wrote:


    I setup an ini with autohatch enabled and a couple areas listed. When I
    run mutil it claims to be hatching, but no tic/flo files are produced.

    I have not used the autohatch feature, so I'm not sure about that.

    When mutil tosses files to other nodes it always puts them (the file and the tic) in the target nodes filebox. So each node you want to send files to needs to have a filebox or it fails.

    Files and tics are not added to the BSO, the BSO is not used for files and tics, just the filebox.


    AHA! That's probably where the problem is. I have not configured fileboxes.

    Unfortunately still no joy. Anyone done a walkthrough on hatching with Mystic? --- SBBSecho 3.14-Linux
    * Origin: The Undermine - bbs.undermine.ca (21:4/103)
  • From Avon@21:1/101 to Underminer on Thu May 13 20:55:23 2021
    On 13 May 2021 at 02:45a, Underminer pondered and said...

    Unfortunately still no joy. Anyone done a walkthrough on hatching with Mystic? --- SBBSecho 3.14-Linux

    I can help you good sir.

    Just let me know to start with what are you trying to hatch and to whom?

    If you want to email me your hatch ini and we can go from there :)

    Best, Paul

    --- Mystic BBS v1.12 A46 2020/08/26 (Windows/32)
    * Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (21:1/101)
  • From Underminer@21:4/103 to Avon on Fri May 14 13:34:01 2021
    Re: Re: Hatch/Auto-hatch information
    By: Avon to Underminer on Thu May 13 2021 08:55 pm

    Unfortunately still no joy. Anyone done a walkthrough on hatching
    with Mystic? --- SBBSecho 3.14-Linux
    I can help you good sir.
    Just let me know to start with what are you trying to hatch and to whom? If you want to email me your hatch ini and we can go from there :)

    Thank you, sir!
    I have managed to get passthrough tossing working with enabling fileboxes, but still am still unable to hatch files. I'm not specifically in need of hatching anything in the moment, but want to understand the process and make sure it works before I have need. I shall fire you off an email.
    ===
    Underminer - The Undermine BBS
    --- SBBSecho 3.14-Linux
    * Origin: The Undermine - bbs.undermine.ca (21:4/103)
  • From Avon@21:1/101 to Underminer on Sat May 15 14:42:47 2021
    On 14 May 2021 at 01:34p, Underminer pondered and said...

    Thank you, sir!
    I have managed to get passthrough tossing working with enabling
    fileboxes, but still am still unable to hatch files. I'm not
    specifically in need of hatching anything in the moment, but want to understand the process and make sure it works before I have need. I
    shall fire you off an email. ===

    Got it and replied. I think the suggestions will hopefully solve your probs :)

    Nice chatting with you again. Thanks for posting in fsxNet :)

    --- Mystic BBS v1.12 A46 2020/08/26 (Windows/32)
    * Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (21:1/101)