• Mystic and FidoNet

    From Sigsegv@21:3/106 to All on Fri Apr 17 13:37:02 2020
    Hi everyone -- I'm looking for some information on configuring Mystic to be abel to send netmail, so I can obtain my Fidonet node address.

    I used to run a BBS way back in the 80's and 90's, and recall needing
    FrontDoor in order to make this whole thing work.

    I followed Avon's awesome videos on Youtube to setup the Fidonet groups,
    etc., but what I"m missing is how you actually send netmail and to which hub?

    Thanks!!

    --- Mystic BBS v1.12 A45 2020/02/18 (Linux/64)
    * Origin: Neuroflux BBS (21:3/106)
  • From Alpha@21:4/158 to Sigsegv on Fri Apr 17 15:25:46 2020
    111
    Hi everyone -- I'm looking for some information on configuring Mystic to be abel to send netmail, so I can obtain my Fidonet node address.

    There's actually a video that covers netmail setup.

    https://bit.ly/3eu98Zd

    You'd need to get a "real" node number from your NC, and then follow the POLICY4 doc instructions. https://www.fidonet.org/index.html

    That should cover it!

    |14Þ |15Alpha
    |14ÜÝ |07Card & Claw BBS
    |06Þ |08cardandclaw.com:8888

    --- Mystic BBS v1.12 A46 2020/04/13 (Linux/64)
    * Origin: Card & Claw BBS (21:4/158)
  • From Beery@21:4/109 to Sigsegv on Fri Apr 17 11:25:54 2020
    111
    You need to go to www.fidonet.org and first, grab a copy of the nodelist.

    Then, follow the link on "How to Join Fidonet" which will give you details. When you have the nodelist, you can then look for your local NC to your area
    to start the process of joining Fidonet.

    Beery

    --Beery Miller -- 9640 News BBS -- 9640news.ddns.net:9640 --

    --- Mystic BBS v1.12 A46 2020/04/11 (Windows/64)
    * Origin: 9640 News BBS (21:4/109)
  • From Vk3jed@21:1/109 to Sigsegv on Sat Apr 18 12:46:00 2020
    On 04-17-20 13:37, Sigsegv wrote to All <=-

    Hi everyone -- I'm looking for some information on configuring Mystic
    to be abel to send netmail, so I can obtain my Fidonet node address.

    I used to run a BBS way back in the 80's and 90's, and recall needing FrontDoor in order to make this whole thing work.

    Mystic has everything you need - BBS, tosser and mailer. No need to use separate pieces of software nowadays (though you can if you want to).

    I followed Avon's awesome videos on Youtube to setup the Fidonet
    groups, etc., but what I"m missing is how you actually send netmail and
    to which hub?

    I'm not quite sure what you're asking, there's a subtle distinction I'm
    issing.


    ... He's dead, Jim; kick him yourself if you don't believe me.
    === MultiMail/Win v0.51
    --- SBBSecho 3.10-Linux
    * Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (21:1/109)
  • From Captain Obvious@21:1/157 to Sigsegv on Sat Apr 18 05:55:10 2020
    On 17 Apr 2020, Sigsegv said the following...

    I followed Avon's awesome videos on Youtube to setup the Fidonet groups, etc., but what I"m missing is how you actually send netmail and to which hub?

    Most NCs don't actually require you to send them a netmail before assigning
    you a node number nowadays but they are supposed to. Have you set up a fido address in the configuration with a node number of /999 yet? From the Policy4 document:
    You must set up your software so that the from-address in your message does
    not cause problems for the coordinator who receives it. If you pick the address of an existing system, this will cause obvious problems. If your software is capable of using address -1/-1, this is the traditional address used by potential sysops. Otherwise use net/9999 (e.g. if you are applying
    to net 123, set your system up as 123/9999). Many nets have specific instructions available to potential sysops and these procedures may indicate
    a preference for the from-address.

    The message you send must include at least the following information:

    1) Your name.
    2) Your voice telephone number
    3) The name of your system.
    4) The city and state where your system is located.
    5) The phone number to be used when calling your system.
    6) Your hours of operation, netmail and BBS.
    7) The maximum baud rate you can support.
    8) The type of mailer software and modem you are using.

    Anyway, whichever NC you plan to send the netmail to you need to add in
    Mystic CFG under echomail nodes. They should be set up to accept netmail without a password on their end but YMMV.

    Log in to Mystic and in your netmail base go ahead and send the message from there. Mystic has builtin Nodelist browsing so as long as you have that portion set up correctly you should be able to write and send the netmail.

    -=>Richard Miles<=-
    -=>Captain Obvious<=-
    -=>bbs.shadowscope.com<=-

    --- Mystic BBS v1.12 A46 2020/03/12 (Windows/32)
    * Origin: Shadowscope BBS | bbs.shadowscope.com | Temple, GA (21:1/157)