• More then one person at one time via telnet

    From Gregory Deyss@21:1/127 to All on Wed Oct 20 20:23:52 2021
    Hello All,
    Is it possible for more than one person to connect to Mystic via a telnet connection?
    My recent experience has been that only one person is allowed. I believe I
    have my configuration setup to allow for more than one person at a time.
    Not sure what is wrong.

    Thanks
    Greg

    --- Mystic BBS v1.12 A46 2020/08/26 (Windows/64)
    * Origin: Capital Station BBS * telnet://csbbs.dyndns.org * (21:1/127)
  • From Al@21:4/106 to Gregory Deyss on Wed Oct 20 17:35:57 2021
    Hello Gregory,

    Is it possible for more than one person to connect to Mystic via a
    telnet connection? My recent experience has been that only one person
    is allowed. I believe I have my configuration setup to allow for more
    than one person at a time. Not sure what is wrong.

    I'm not sure there has ever been more than one person on my BBS at the same time but I think it should be OK.

    In Mystic -cfg -> Servers -> General Options I have Max BBS Nodes set to 6, and under Configure Servers -> Telnet I have Max Allowed also set to 6.

    Ttyl :-),
    Al

    ... There's always one more bug.
    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: The Rusty MailBox - Penticton, BC Canada (21:4/106)
  • From paulie420@21:2/150 to Gregory Deyss on Thu Oct 21 08:32:12 2021
    Hello All,
    Is it possible for more than one person to connect to Mystic via a telnet connection?

    Heck yea - I've had 6 nodes filled at once, and we've even had MeaTLoTioN's PiMP (Phone in my pocket) BBS filled with 10 nodes - on a OnePlus cell phone. LOL.

    I suggest jacking nodes up to 10 in settings; I don't know what hardware COULDN'T handle them. (2o runs on a Raspberry Pi w/ 1GB RAM...)



    |07p|15AULIE|1142|07o
    |08.........

    --- Mystic BBS v1.12 A47 2021/08/29 (Raspberry Pi/32)
    * Origin: 2o fOr beeRS bbs>>>20ForBeers.com:1337 (21:2/150)
  • From bcw142@21:1/145 to Gregory Deyss on Mon Dec 20 17:52:49 2021
    On 20 Oct 2021, Gregory Deyss said the following...

    Hello All,
    Is it possible for more than one person to connect to Mystic via a telnet connection?

    Yes, I have 16 telnet lines open for example. The default is 3 at the same time, but you can do much more - not sure of a limit. It's in the telnet
    server settings, you can also do ssh. NNTP. POP3 and a few others.

    ... It said "insert disk #3", but only two will fit...

    --- Mystic BBS v1.12 A47 2021/12/13 (Raspberry Pi/32)
    * Origin: Mystic Pi BBS bcw142.zapto.org (21:1/145)