• [ANSI] fsxNet from Mystic --> Synchronet

    From mastermind@21:1/101 to All on Sat Apr 25 10:04:26 2020
    |04Without any software-politics
    , I am moving American Pi BBS
    from Mystic toSynchronet software
    . Synchro is much better in the current for MY need
    s.Couple quick questions...
    I have all the info for fsxNet that I did while run
    ning it on my MysticBBS... I assum
    e that I'll just setup a net for Synchro and en
    ter in all mycurrent password, QWK stuff
    , HUB details and the like that I *alre
    ady* have.Is that correct?
    Do I need to let Avon or f
    sxNet know anything because I'm switching
    softwares? Does anything need to change on MY end
    ? I dig fsxNet and don
    't want to lose it... I see other S
    ynchros with fsx, so Iknow I
    can- I just want to make sure I do it correct
    ly.Thanks in advance ladies &
    gents. WOOT!|15M|
    08@|15STERM|07i|15
    ND
    --- Mystic BBS v1.12 A46 2020/04/20 (Windows/32)
    * Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (21:1/101)
  • From alterego@21:2/116 to mastermind on Sat Apr 25 14:45:26 2020
    132
    Re: [ANSI] fsxNet from Mystic --> Synchronet
    By: mastermind to All on Sat Apr 25 2020 10:04 am

    [0m[1;1H[1;30m|[36m04[37mW[0mithout any software[1;30m-[0mpolitics [A[32C[1;30m, [37mI [0mam moving [1mA[0mmerican [1mP[0mi [1mBBS [A[62C[0mfrom [1mM[0mystic to[B[76D[1mS[0mynchronet software[1;30m

    I'm not sure what you are asking, but I just see a bunch of noise.

    I know there are ANSI codes in here, but it doesnt render well for me. Can you turn them off?
    ...лоег



    ... I'm not broke, I'm just badly bent.
    --- SBBSecho 3.10-Linux
    * Origin: I'm playing with ANSI+videotex - wanna play too? (21:2/116)
  • From apam@21:1/126 to mastermind on Sat Apr 25 15:07:10 2020
    I have all the info for fsxNet that I did while running it on my
    Mystic BBS... I assume that I'll just setup a net for Synchro and
    enter in all my current password, QWK stuff, HUB details and the
    like that I *already* have. Is that correct

    Yes.

    Do I need to let Avon or fsxNet know anything because I'm switching softwares? Does anything need to change on MY end?

    No.

    I dig fsxNet and don't want to lose it... I see other Synchros with
    fsx, so I know I can- I just want to make sure I do it correctly.

    Should be pretty painless, It's just a matter of setting things up with
    your current settings.

    Andrew

    --- MagickaBBS v0.13alpha (Linux/x86_64)
    * Origin: HappyLand - telnet://magickabbs.com:2023/ (21:1/126)
  • From ryan@21:1/168 to alterego on Fri Apr 24 23:46:40 2020
    I know there are ANSI codes in here, but it doesnt render well for me.
    Can you turn them off?

    Seconded - I think ansi codes are supposed to be reserved for ads, no? In specific subs?

    --- Mystic BBS v1.12 A46 2020/04/13 (Linux/64)
    * Origin: monterey bbs (21:1/168)
  • From mastermind@21:1/101 to apam on Mon Apr 27 19:01:58 2020
    Should be pretty painless, It's just a matter of setting things up with your current settings.

    Andrew

    As always with you, thanks - I don't know how that message got written as
    ANSI but it was messy for others to read and you got it sorted and answered
    my questions. Cheers.... appreciate the help.

    |15M|08@|15STERM|07i|15ND

    --- Mystic BBS v1.12 A46 2020/04/20 (Windows/32)
    * Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (21:1/101)
  • From apam@21:1/126 to mastermind on Mon Apr 27 17:03:54 2020
    As always with you, thanks - I don't know how that message got
    written as ANSI but it was messy for others to read and you got it
    sorted and answered my questions. Cheers.... appreciate the help.

    No worries, have fun with synchronet :)

    Andrew

    --- MagickaBBS v0.13alpha (Linux/x86_64)
    * Origin: HappyLand - telnet://magickabbs.com:2023/ (21:1/126)