• Synchro Points again..

    From Bucko@21:4/131 to All on Sun Jul 29 16:27:30 2018
    Another question since I am having a tough time getting Sychro setup with BinkIt or binkD is setting up this point off of my Mystic board easier to do with QWK?? I mean it's not going anywhere except my inhouse Mystic board.. Easier? or should I stick with trying to get binkIt working??

    --- Mystic BBS v1.12 A39 2018/04/21 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Al@21:4/106 to Bucko on Sun Jul 29 13:38:50 2018
    Re: Synchro Points again..
    By: Bucko to All on Sun Jul 29 2018 04:27 pm

    Another question since I am having a tough time getting Sychro setup with BinkIt or binkD is setting up this point off of my Mystic board easier to do with QWK?? I mean it's not going anywhere except my inhouse Mystic board.. Easier? or should I stick with trying to get binkIt working??

    Easier?

    I would stick with your binkit or binkd plan for now. You are almost done if I have been following along right.

    QWK networking probably is easier.. but..

    I have never been able to successfully setup mystic as a hub. That doesn't mean it can't be done.. I may have missed something and you may have success.

    You will have to use the correct message base numbers for the QWK areas. I'm not sure how to determine that from a Mystic BBS. A little trial and error may be needed to get it done.

    Ttyl :-),
    Al


    ... Survival tip #42 - Never play leapfrog with a unicorn.
    --- SBBSecho 3.05-Linux
    * Origin: The Rusty MailBox - Penticton, BC Canada (21:4/106)
  • From Bucko@21:4/131 to Al on Sun Jul 29 17:27:40 2018
    On 07/29/18, Al said the following...


    Easier?

    I would stick with your binkit or binkd plan for now. You are almost
    done if I have been following along right.

    QWK networking probably is easier.. but..

    I have never been able to successfully setup mystic as a hub. That
    doesn't mean it can't be done.. I may have missed something and you may have success.

    You will have to use the correct message base numbers for the QWK areas. I'm not sure how to determine that from a Mystic BBS. A little trial and error may be needed to get it done.

    Ttyl :-),

    Thanks for the vote of confidence Al, I'm just having a heck of a time
    getting binkIt to work.. I even tried BinkD but can't seem to get it to startup.. I don't know but when I start seeing double when I am trying to do something I walk away from it for a bit, so I am working on my gameserver
    right now, setting up the computer it is going to run on.. I did this when I was working on getting an Amiga Emulator running to run an Amiga board and
    when I came back to it I saw it clearer and was able to get the emulator
    setup and running fine.. Maybe some time away again will help.. LOL

    --- Mystic BBS v1.12 A39 2018/04/21 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Al@21:4/106 to Bucko on Sun Jul 29 14:47:14 2018
    Re: Re: Synchro Points again..
    By: Bucko to Al on Sun Jul 29 2018 05:27 pm

    Thanks for the vote of confidence Al, I'm just having a heck of a time getting binkIt to work..

    If you have BinkIT installed there will be a section for it in your ctrl/services.ini like so..

    [BINKP]
    Port=24554
    Command=binkit.js

    If you already have another binkp answering on port 24554 (your Mystic probably does) you'll want to change that poer to something else like 24555. You'll have to remember to use that alternate port in the node setting in Mystic as well.

    You'll have to watch with Mystic's mailer, binkit and binkd that there are no port conflicts or something won't work.. :)

    I even tried BinkD but can't seem to get it to startup..

    A port conflict is the usual problem here.

    I don't know but when I start seeing double when I am trying to
    do something I walk away from it for a bit,

    Yep, I have a few things on my todo list that I just had to walk away from. I'll have a sleep on it and get back to them another day.. :)

    Ttyl :-),
    Al


    ... Math problems? Call 1-800-10*(24+13)-(64-16)/2^14E2.
    --- SBBSecho 3.05-Linux
    * Origin: The Rusty MailBox - Penticton, BC Canada (21:4/106)
  • From Bucko@21:4/131 to Al on Sun Jul 29 17:52:20 2018
    On 07/29/18, Al said the following...

    Re: Re: Synchro Points again..

    If you have BinkIT installed there will be a section for it in your ctrl/services.ini like so..

    [BINKP]
    Port=24554
    Command=binkit.js

    If you already have another binkp answering on port 24554 (your Mystic probably does) you'll want to change that poer to something else like 24555. You'll have to remember to use that alternate port in the node setting in Mystic as well.

    Unfortunately that is not the issue right now, the issue is when I jsexec binkit install I am getting an error when it starts reading from fido.js in
    the load directory line 2 reference error require is not defined..

    Driving me nuts because I don't understand java and my kid who is the all knowing all powerful wizard of java for me is not here!!! LOL

    --- Mystic BBS v1.12 A39 2018/04/21 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Vk3jed@21:1/109 to Bucko on Mon Jul 30 09:33:00 2018
    On 07-29-18 16:27, Bucko wrote to All <=-

    Another question since I am having a tough time getting Sychro setup
    with BinkIt or binkD is setting up this point off of my Mystic board easier to do with QWK?? I mean it's not going anywhere except my
    inhouse Mystic board.. Easier? or should I stick with trying to get
    binkIt working??

    I haven't used BinkIT, but from what others have said, it looks pretty easy to setup. Digital Man can certainly help there. I use binkd myself, and have had no issues getting it working. Anyway, what issues are you having? I know first time I setup Synchronet, I had issues with the multiple steps needed, but now I have adding a new net down to such a fine art, I can do it all in one hit and get it right first time, as I did with RetroNet yesterday. :)


    ... Archaeologist: A person whose career lies in ruins.
    === MultiMail/Win v0.51
    --- SBBSecho 3.03-Linux
    * Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (21:1/109)
  • From Vk3jed@21:1/109 to Al on Mon Jul 30 09:37:00 2018
    On 07-29-18 14:47, Al wrote to Bucko <=-

    You'll have to watch with Mystic's mailer, binkit and binkd that there
    are no port conflicts or something won't work.. :)

    Are they running on the same BBS Bucko? If so, Al is right here. Or you have to go down the more complex route of running multiple IPs on the same box like I do, but I suggest using a different port, it is much easier. :D

    I even tried BinkD but can't seem to get it to startup..

    A port conflict is the usual problem here.

    binkd.log is very useful for debugging here. :)


    ... I'm on the computer and I'm not wearing pants!
    === MultiMail/Win v0.51
    --- SBBSecho 3.03-Linux
    * Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (21:1/109)
  • From Bucko@21:4/131 to Vk3jed on Sun Jul 29 21:24:06 2018
    On 07/30/18, Vk3jed said the following...


    I haven't used BinkIT, but from what others have said, it looks pretty easy to setup. Digital Man can certainly help there. I use binkd
    myself, and have had no issues getting it working. Anyway, what issues are you having? I know first time I setup Synchronet, I had issues with the multiple steps needed, but now I have adding a new net down to such
    a fine art, I can do it all in one hit and get it right first time, as I did with RetroNet yesterday. :)
    V
    Well, BinkIT is supposed to be simple my issues are with the jsfido java
    file, it is giving me an error when I install.. As for binkD can't seem to
    find a working version, I have downloaded a few but I am just burnt with it.. Gonna give it a couple of days then go back to it..

    --- Mystic BBS v1.12 A39 2018/04/21 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Bucko@21:4/131 to Vk3jed on Sun Jul 29 21:25:14 2018
    On 07/30/18, Vk3jed said the following...


    Are they running on the same BBS Bucko? If so, Al is right here. Or
    you have to go down the more complex route of running multiple IPs on
    the same box like I do, but I suggest using a different port, it is much easier. :D

    No actually, they are on two different VM's same host but different VM's..
    Also two different ports...

    --- Mystic BBS v1.12 A39 2018/04/21 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Dumas Walker@21:1/175 to BUCKO on Sun Jul 29 19:53:00 2018
    Driving me nuts because I don't understand java and my kid who is the all knowing all powerful wizard of java for me is not here!!! LOL

    I find when I am having issues like this that it is best to wait and let DM
    get back with me with an answer. It usually fixes it or at least gets me a
    lot closer. :)

    ---
    þ SLMR 2.1a þ Oooo, Better run, Mr. Wino!!!
    * Origin: Capitol City Online - capitolcityonline.net (21:1/175)
  • From Bucko@21:4/131 to Dumas Walker on Sun Jul 29 23:08:32 2018
    On 07/29/18, Dumas Walker said the following...


    I find when I am having issues like this that it is best to wait and let DM get back with me with an answer. It usually fixes it or at least
    gets me a lot closer. :)


    I agree with you Dumas, that is why I walked away from it for a bit.. I ended up working on my Gameserver and have that running now.. At least now I can
    put all of my doors in one spot and share them among my different boards..

    --- Mystic BBS v1.12 A39 2018/04/21 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Vk3jed@21:1/109 to Bucko on Mon Jul 30 17:29:00 2018
    On 07-29-18 21:24, Bucko wrote to Vk3jed <=-

    Well, BinkIT is supposed to be simple my issues are with the jsfido
    java file, it is giving me an error when I install.. As for binkD can't

    I think Digital Man is your best resource there.

    seem to find a working version, I have downloaded a few but I am just burnt with it.. Gonna give it a couple of days then go back to it..

    Have you checked binkd.log? That's pretty good at shedding light on crashes.


    ... Thunderclap - an extremely violent form of VD.
    === MultiMail/Win v0.51
    --- SBBSecho 3.03-Linux
    * Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (21:1/109)
  • From Vk3jed@21:1/109 to Bucko on Mon Jul 30 17:32:00 2018
    On 07-29-18 21:25, Bucko wrote to Vk3jed <=-

    No actually, they are on two different VM's same host but different
    VM's.. Also two different ports...

    Oh, OK. That shouldn't be an issue, since the VMs are effectively separate machines with different IPs. Really need to see what your binkd.log file
    hows.


    ... A year spent in AI is enough to make one believe in God.
    === MultiMail/Win v0.51
    --- SBBSecho 3.03-Linux
    * Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (21:1/109)
  • From Al@21:4/106 to Bucko on Mon Jul 30 09:53:50 2018
    Re: Re: Synchro Points again..
    By: Bucko to Al on Sun Jul 29 2018 05:52 pm

    Unfortunately that is not the issue right now, the issue is when I jsexec binkit install I am getting an error when it starts reading from fido.js in the load directory line 2 reference error require is not defined..

    What version of SBBS did you start with and what do you have now?

    That error sounds like your install is not fully up to date.

    On my SBBS here fido.js is in /sbbs/exec/load and is v1.33 2018/06/17. The contents of the load directory is important also.

    Ttyl :-),
    Al


    ... Should I or shouldn't I?... Too late, I did!
    --- SBBSecho 3.05-Linux
    * Origin: The Rusty MailBox - Penticton, BC Canada (21:4/106)
  • From Bucko@21:4/131 to Al on Mon Jul 30 13:44:02 2018
    On 07/30/18, Al said the following...


    What version of SBBS did you start with and what do you have now?

    That error sounds like your install is not fully up to date.

    On my SBBS here fido.js is in /sbbs/exec/load and is v1.33 2018/06/17.
    The contents of the load directory is important also.


    Hi Al, I started with the base file system then upgraded the exec load and I believe text directorys from the ftp site which were dated 7/26.. I am not in front of my computer now to get the version number so I can't be sure.. I
    will check it when I get home.. Gonna try a different route tonight when I
    get home which I think will solve all of my problems. I found a tutorial
    online on setting up Radius (Argus) and I am going to try that. If it works then I am set.. :) I'll let you all know...

    --- Mystic BBS v1.12 A39 2018/04/21 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)