However, I have not had luck with 'make www' or 'make'. make www fails immediately (sorry, the error has scrolled off), and a simple make runs
cd ../deps/cdk-5.0-20161210/ && ./configure /bin/sh: 1: ./configure: Permission denied
You wont see any output though as it is redirected to the log file. If
you want you could email me the log.
However, I have not had luck with 'make www' or 'make'. make www fails immediately (sorry, the error has scrolled off), and a simple make runs
make www would have failed if you don't have libmicrohttpd-dev installed.
cd ../deps/cdk-5.0-20161210/ && ./configure /bin/sh: 1: ./configure: Permission denied
This is a mystery. What happens if you go into deps/cdk-5.0-20161210 and
type ./configure manually?
Are you compiling with the same user that checked out the source? are you able to run /bin/sh ?
If you want to get a log of everything, you should be able to do
something like this:
make > logfile.txt 2>&1
You wont see any output though as it is redirected to the log file. If
you want you could email me the log.
I will try that but, before I do, there may be something important I forgot to mention. Because the pi has limited disk space compared to my other machines, I was installing Magicka to an NFS share that is under my home directory. While the user has r/w/x to everything on the share, I wondered later if it being on a share might cause issues during a
compile?
I will try that but, before I do, there may be something important I forgot to mention. Because the pi has limited disk space compared to my other machines, I was installing Magicka to an NFS share that is under my home directory. While the user has r/w/x to everything on the share, I wondered later if it being on a share might cause issues during a compile?
That actually was it. It is working now. :) I may try in future to
move the installation to the NFS share but, for now, I guess it is fine running from a thumb drive. :)
I'll do some research and see if any other projects have had issues
running configure scripts on NFS. Perhaps there is an option that needs
to be passed to mount or something.
Maybe. For reference, it is mounted in fstab using the following
options:
rw,user,rsize=8192,wsize=8192,hard,intr
rw,user,rsize=8192,wsize=8192,hard,intrThanks, I've opened an issue on github and will look into it soonish. https://github.com/MagickaBBS/MagickaBBS/issues/17
It's there if you think of anything you want to add to it, it will
probably be a few days before I get into it.
Sysop: | Keyop |
---|---|
Location: | Huddersfield, West Yorkshire, UK |
Users: | 294 |
Nodes: | 16 (2 / 14) |
Uptime: | 247:28:13 |
Calls: | 6,626 |
Calls today: | 2 |
Files: | 12,175 |
Messages: | 5,320,897 |