• FTelnet

    From Joe Schweier@1:342/200 to ALL on Wed Jul 8 12:51:34 2020
    Who here uses the FTelnet program with WINServer??

    Thanx
    Joe

    ---
    * Origin: Joe's Mail System 1:342/200 -=joesbbs.com=- (1:342/200)
  • From Terry Roati@3:640/1321 to Joe Schweier on Thu Jul 9 09:51:46 2020

    I do, you can see it on tfb-bbs.org.

    You can use Ftelnet to login in via the web page or log in via the web and
    then login again using Ftelnet and use web & telnet at the same time.

    Terry

    On Jul 08, 2020 12:51pm, Joe Schweier wrote to All:

    Who here uses the FTelnet program with WINServer??

    Thanx
    Joe

    ---
    * Origin: Joe's Mail System 1:342/200 -=joesbbs.com=- (1:342/200)

    ... Platinum Xpress & Wildcat!..... Nice!!!!
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: The File Bank BBS! (3:640/1321)
  • From Joe Schweier@1:342/200 to Terry Roati on Thu Jul 9 09:25:30 2020
    I do, you can see it on tfb-bbs.org.

    You can use Ftelnet to login in via the web page or log
    in via the web and
    then login again using Ftelnet and use web & telnet at
    the same time.

    Terry

    On Jul 08, 2020 12:51pm, Joe Schweier wrote to All:

    Who here uses the FTelnet program with WINServer??

    I am having an absolute bitch of a time getting fTelnet running. It seem that every time I touch my BBS it sends me into a tail spin for days. I ran WINServer for years... had fTelnet for years... and the ephin thing wants to give me a rough time. No matter what way I want to install it it wants to go to the author's test BBS...

    :(
    Joe

    ---
    * Origin: Joe's Mail System 1:342/200 -=joesbbs.com=- (1:342/200)
  • From RUBEN FIGUEROA@1:124/5013 to JOE SCHWEIER on Thu Jul 9 16:42:46 2020
    Who here uses the FTelnet program with WINServer??

    Thanx
    Joe

    Terry and I do. Use it for Telnet to bbs and RLogin to gamesrv.
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: WildCat Prison BBS, Mesquite Tx (1:124/5013)
  • From Terry Roati@3:640/1321 to Joe Schweier on Fri Jul 10 09:54:46 2020
    Hi Joe,

    Run the wizard and fill in your info.

    http://embed-v2.ftelnet.ca/

    Once that is done you can test and should be able to connect to your BBS.

    Once it works, copy the code into the html page you will use to load Ftelnet.

    Terry


    On Jul 09, 2020 09:25am, Joe Schweier wrote to Terry Roati:

    I do, you can see it on tfb-bbs.org.

    You can use Ftelnet to login in via the web page or log
    in via the web and
    then login again using Ftelnet and use web & telnet at
    the same time.

    Terry

    On Jul 08, 2020 12:51pm, Joe Schweier wrote to All:

    Who here uses the FTelnet program with WINServer??

    I am having an absolute bitch of a time getting fTelnet running. It
    seem that every time I touch my BBS it sends me into a tail spin for
    days. I ran WINServer for years... had fTelnet for years... and the
    ephin thing wants to give me a rough time. No matter what way I want
    to install it it wants to go to the author's test BBS...

    :(
    Joe

    ---
    * Origin: Joe's Mail System 1:342/200 -=joesbbs.com=- (1:342/200)

    ... Platinum Xpress & Wildcat!..... Nice!!!!
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: The File Bank BBS! (3:640/1321)
  • From ib joe@1:342/201 to Terry Roati on Fri Jul 10 11:34:12 2020
    On 10 Jul 2020, Terry Roati said the following...

    Hi Joe,

    Run the wizard and fill in your info.

    http://embed-v2.ftelnet.ca/

    Once that is done you can test and should be able to connect to your BBS.

    Once it works, copy the code into the html page you will use to load Ftelnet.

    Terry

    Did that.... before I wrote the post. I have trierd the 2 ways... The one where you run the files local and the way where you use cut and paste the
    info to your web page.... When I test it on fTelnet site... it works.... once
    I cut and paste the info into my web page it connects with the fTelnet test website. If I use the self hosting mode it trys to connct to the fTelnet
    site as well. No where in my setup is there address and I'm at odds with the issue.
    I have had it working in the past, for years, and now I cannot get it running... piss me off. I did change internet providers... but I have no clue...

    Thanx

    IB Joe
    AKA Joe Schweier
    SysOp of Joe's BBS
    -= JoesBBS.Com =-

    --- Mystic BBS v1.12 A45 2020/02/18 (Raspberry Pi/32)
    * Origin: Joe's BBS -=JoesBBS.Com=- (1:342/201)
  • From Terry Roati@3:640/1321 to Ib Joe on Sat Jul 11 11:02:16 2020

    Hi Joe,


    On Jul 10, 2020 11:40am, Ib Joe wrote to Terry Roati:

    Did that.... before I wrote the post. I have trierd the 2 ways... The
    one where you run the files local and the way where you use cut and
    paste the info to your web page.... When I test it on fTelnet site...
    it works.... once I cut and paste the info into my web page it connects with the fTelnet test website. If I use the self hosting mode it trys
    to connct to the fTelnet site as well. No where in my setup is there address and I'm at odds with the issue.
    I have had it working in the past, for years, and now I cannot get it running... piss me off. I did change internet providers... but I have
    no clue...

    All I can think of is that maybe one of the ports required is not open in
    your firewall. If it works from Ftlenet site then the issue is definitely at your end.

    Terry

    ... Platinum Xpress & Wildcat!..... Nice!!!!
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: The File Bank BBS! (3:640/1321)
  • From ib joe@1:342/201 to Terry Roati on Fri Jul 10 20:35:36 2020
    On 11 Jul 2020, Terry Roati said the following...


    Hi Joe,


    On Jul 10, 2020 11:40am, Ib Joe wrote to Terry Roati:

    Did that.... before I wrote the post. I have trierd the 2 ways...
    Th
    one where you run the files local and the way where you use cut and paste the info to your web page.... When I test it on fTelnet
    site...
    it works.... once I cut and paste the info into my web page it
    connec
    with the fTelnet test website. If I use the self hosting mode it
    try
    to connct to the fTelnet site as well. No where in my setup is
    there
    address and I'm at odds with the issue.
    I have had it working in the past, for years, and now I cannot get
    it
    running... piss me off. I did change internet providers... but I
    hav
    no clue...

    All I can think of is that maybe one of the ports required is not open
    in your firewall. If it works from Ftlenet site then the issue is definitely at your end.

    Terry

    I have the same thinking.... no clue... works on the test butg doesn't work when I cut and paste it over...

    Wrote the author a message ... no answer yet...

    :(

    IB Joe
    AKA Joe Schweier
    SysOp of Joe's BBS
    -= JoesBBS.Com =-

    --- Mystic BBS v1.12 A45 2020/02/18 (Raspberry Pi/32)
    * Origin: Joe's BBS -=JoesBBS.Com=- (1:342/201)
  • From Robert Wolfe@1:261/20 to Ib Joe on Sun Jul 12 23:31:25 2020
    All I can think of is that maybe one of the ports required is no
    in your firewall. If it works from Ftlenet site then the issue is definitely at your end.

    Terry

    I have the same thinking.... no clue... works on the test butg
    doesn't work when I cut and paste it over...

    Wrote the author a message ... no answer yet...

    Please keep us posted.


    --- InterEcho 1.20
    * Origin: Omicron Theta/2 * os2bbs.us * Southaven MS (1:261/20)
  • From ib joe@1:342/201 to Robert Wolfe on Sun Jul 12 12:26:15 2020
    On 12 Jul 2020, Robert Wolfe said the following...

    All I can think of is that maybe one of the ports required is no in your firewall. If it works from Ftlenet site then the issue is definitely at your end.

    Terry

    I have the same thinking.... no clue... works on the test butg
    doesn't work when I cut and paste it over...

    Wrote the author a message ... no answer yet...

    Please keep us posted.


    No problem..

    IB Joe
    AKA Joe Schweier
    SysOp of Joe's BBS
    -= JoesBBS.Com =-

    --- Mystic BBS v1.12 A45 2020/02/18 (Raspberry Pi/32)
    * Origin: Joe's BBS -=JoesBBS.Com=- (1:342/201)
  • From ib joe@1:342/201 to Robert Wolfe on Tue Jul 14 18:25:31 2020
    On 12 Jul 2020, Robert Wolfe said the following...

    All I can think of is that maybe one of the ports required is no in your firewall. If it works from Ftlenet site then the issue is definitely at your end.

    Terry

    I have the same thinking.... no clue... works on the test butg
    doesn't work when I cut and paste it over...

    Wrote the author a message ... no answer yet...

    Please keep us posted.

    I'm almost there.... piss me off... I using back ups of back ups and and I
    was always editing the wrong file. You have no idea how many times I was playing with the wrong html file. Now I'm getting an ftelnet error... at
    least it's not what I was getting

    IB Joe
    AKA Joe Schweier
    SysOp of Joe's BBS
    -= JoesBBS.Com =-

    --- Mystic BBS v1.12 A45 2020/02/18 (Raspberry Pi/32)
    * Origin: Joe's BBS -=JoesBBS.Com=- (1:342/201)