• SeaTel

    From Ruben Figueroa@1:116/17 to All on Tue Feb 19 14:32:18 2019
    SeaTel works great. I was wondering if you can incorporate rlogin also
    so that I can connect to some game servers.

    --- Wildcat! v7.0.454.6 (Nov 13 2018), Editor Mod v2.1
    * Origin: Omicron Theta (1:116/17)
  • From Robert Wolfe@1:116/17 to Ruben Figueroa on Tue Feb 19 20:07:56 2019

    On Feb 19, 2019 02:32pm, RUBEN FIGUEROA wrote to ALL:

    SeaTel works great. I was wondering if you can incorporate rlogin also
    so that I can connect to some game servers.

    --- Wildcat! v7.0.454.6 (Nov 13 2018), Editor Mod v2.1

    RLOGIN is not available in WINServer yet. I have it on the feature request list
    I am preparing for Hector to send to him on Friday, if not before.

    ... Robert Wolfe <robert.wolfe@winserver.org>, Sysop, Omicron Theta BBS
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: Omicron Theta (1:116/17)
  • From Ruben Figueroa@1:124/5013 to ROBERT WOLFE on Wed Feb 20 07:07:26 2019
    RLOGIN is not available in WINServer yet. I have it on the feature request list
    I am preparing for Hector to send to him on Friday, if not before.

    Thanks for the feed back.
    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx www.rdfig.net (1:124/5013)
  • From Robert Wolfe@1:116/17 to Ruben Figueroa on Wed Feb 20 17:23:40 2019

    On Feb 20, 2019 07:13am, Ruben Figueroa wrote to Robert Wolfe:

    I am preparing for Hector to send to him on Friday, if not before.

    Thanks for the feed back.

    Yep.

    --- Platinum Xpress/Win/WINServer v3.1

    Are you on the AUP? If so, you should have gotten an update to 7.0 for this like I did.

    ... Robert Wolfe <robert.wolfe@winserver.org>, Sysop, Omicron Theta BBS
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: Omicron Theta (1:116/17)
  • From Zazz@1:124/5014.4 to Robert Wolfe on Wed Feb 20 20:32:26 2019
    Re: RE: SeaTel
    By: Robert Wolfe to Ruben Figueroa on Wed Feb 20 2019 17:23:40

    Are you on the AUP? If so, you should have gotten an update to 7.0 for
    this
    like I did.

    Yes, I am. Did not too long ago update.

    Ruben Figueroa
    aka Zazz
    PBSync Prison BBS
    [1:124/5014.4]
    --- SBBSecho 3.06-Win32
    * Origin: PBSync Prison BBS, Mesquite, Tx (1:124/5014.4)
  • From Robert Wolfe@1:116/17 to Zazz on Thu Feb 21 20:47:52 2019
    Are you on the AUP? If so, you should have gotten an update to 7.0 for like I did.

    Yes, I am. Did not too long ago update.

    The there should be a PXWINS-SETUP.EXE or something like that in your
    PXW directory that you need to run to update to the latest release. As
    always, back up before upgrading :)
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: Omicron Theta (1:116/17)
  • From Ruben Figueroa@1:124/5013 to ROBERT WOLFE on Fri Feb 22 08:15:50 2019
    The there should be a PXWINS-SETUP.EXE or something like that in your
    PXW directory that you need to run to update to the latest release. As always, back up before upgrading :)

    So the pxwims-setup.exe should be run again? The first time I got it I
    ran it, so I guess I got an updated one and need to run that one also.

    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx www.rdfig.net (1:124/5013)
  • From Robert Wolfe@1:116/17 to Ruben Figueroa on Fri Feb 22 16:45:30 2019
    The there should be a PXWINS-SETUP.EXE or something like that in your
    PXW directory that you need to run to update to the latest release. As always, back up before upgrading :)

    So the pxwims-setup.exe should be run again? The first time I got it I
    ran it, so I guess I got an updated one and need to run that one also.

    What is the date on the setup file you have from your last AUP run?
    Here is the latest I have:

    02/02/2019 02:23 PM 3,654,834 pxwin-setup.exe

    But, yes, each time that file comes down on the AUP, it has to be run
    again. The AUP does not run it for you.
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: Omicron Theta (1:116/17)
  • From Ruben Figueroa@1:124/5013 to ROBERT WOLFE on Sun Feb 24 08:09:00 2019
    What is the date on the setup file you have from your last AUP run?
    Here is the latest I have:

    02/02/2019 02:23 PM 3,654,834 pxwin-setup.exe

    But, yes, each time that file comes down on the AUP, it has to be run
    again. The AUP does not run it for you.

    I have that one and no I have not run it. I will run it this morning
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: Prison Board BBS Mesquite Tx www.rdfig.net (1:124/5013)
  • From Robert Wolfe@1:116/17 to Ruben Figueroa on Mon Feb 25 17:25:00 2019
    Ruben Figueroa wrote to Robert Wolfe <=-

    I have that one and no I have not run it. I will run it this morning
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: Prison Board BBS Mesquite Tx www.rdfig.net (1:124/5013)

    Looks good! :)

    ... Email returned to sender -- insufficient voltage.
    --- MultiMail/OS/2 v0.50
    * Origin: Omicron Theta (1:116/17)
  • From Robert Wolfe@1:116/18.3 to Ruben Figueroa on Sun Apr 7 20:27:40 2019

    On Feb 22, 2019 08:21am, Ruben Figueroa wrote to Robert Wolfe:

    The there should be a PXWINS-SETUP.EXE or something like that in your
    PXW directory that you need to run to update to the latest release. As
    always, back up before upgrading :)

    So the pxwims-setup.exe should be run again? The first time I got it I ran it, so I guess I got an updated one and need to run that one also.

    Old message, I know, but this got tossed into my test system at bbs2.winserver.org and thought I would write a quick followup to this message and see if things were working as they should be.

    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx www.rdfig.net (1:124/5013)

    ... Platinum Xpress & Wildcat!..... Nice!!!!
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: Platinum Xpress Support 305-248-7815 (1:116/18.3)
  • From Ruben Figueroa@1:124/5013 to ROBERT WOLFE on Mon Apr 8 07:45:52 2019
    Old message, I know, but this got tossed into my test system at bbs2.winserver.org and thought I would write a quick followup to this
    message
    and see if things were working as they should be.

    Yep, still working. Also still hoping RLogin from wildcat can be done
    in the near future.

    Playing with ProBoard now. It's at gap.rdfig.net:2828

    Got most going. Got a few issues with message base, echomail.

    Take care.
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: Prison Board BBS Mesquite Tx www.rdfig.net (1:124/5013)
  • From IB JOE@1:342/201 to Ruben Figueroa on Mon Apr 8 16:58:23 2019
    On 04/08/19, Ruben Figueroa said the following...

    Old message, I know, but this got tossed into my test system at bbs2.winserver.org and thought I would write a quick followup to this
    message
    and see if things were working as they should be.

    Yep, still working. Also still hoping RLogin from wildcat can be done
    in the near future.


    I asked Hector years ago to do something about the RLogin so that it would be compatible with Synchronet and Mystic and he said NO... Somebody will have to write a WCBasic file that would/should do the trick.

    IB JOE
    AKA Joe Schweier
    SysOp of Joe's Computer & BBS
    Telnet: joesbbs.com

    --- Mystic BBS v1.12 A39 2018/04/21 (Raspberry Pi/32)
    * Origin: Joe's Computer & BBS -=joesbbs.com=- (1:342/201)
  • From Ruben Figueroa@1:124/5014.5 to IB JOE on Mon Apr 8 20:42:30 2019
    On 04/08/19, Ruben Figueroa said the following...

    Old message, I know, but this got tossed into my test system at
    bbs2.winserver.org and thought I would write a quick followup to
    this
    message
    and see if things were working as they should be.

    Yep, still working. Also still hoping RLogin from wildcat can be
    done
    in the near future.


    I asked Hector years ago to do something about the RLogin so that it
    would be
    compatible with Synchronet and Mystic and he said NO... Somebody will
    have to
    write a WCBasic file that would/should do the trick.

    IB JOE
    AKA Joe Schweier
    SysOp of Joe's Computer & BBS
    Telnet: joesbbs.com


    I wonder if anyone out there who have the skills that would be willing to do so. Thanks or the info.

    - Ruben Figueroa - Prison Board BBS

    ... And just *WHAT* were those mistakes my parents made?

    --- ProBoard v2.17 [Reg]
    * Origin: ProBoard Prison BBS, Mesquite Tx (1:124/5014.5)
  • From Robert Wolfe@1:116/18.3 to Ruben Figueroa on Mon Apr 8 21:42:58 2019
    Yep, still working. Also still hoping RLogin from wildcat can be done
    in the near future.

    We shall see what 8.0 brings...
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: Platinum Xpress Support 305-248-7815 (1:116/18.3)
  • From Robert Wolfe@1:116/18.3 to Ruben Figueroa on Wed Apr 10 12:55:44 2019
    On 4/8/2019 8:42 PM, Ruben Figueroa wrote to Ib Joe:

    I asked Hector years ago to do something about the RLogin so that
    it
    would be
    compatible with Synchronet and Mystic and he said NO...
    Somebody will
    have to
    write a WCBasic file that would/should do the trick.

    I wonder if anyone out there who have the skills that would be willing
    to do
    so. Thanks or the info.

    Outbound rlogin or inbound?

    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: The Lean Angle BBS * Southaven MS * bbs2.winserver.or (1:116/18.3)
  • From Ruben Figueroa@1:124/5013 to ROBERT WOLFE on Fri Apr 12 08:31:30 2019
    I wonder if anyone out there who have the skills that would be willing
    to do
    so. Thanks or the info.

    Outbound rlogin or inbound?

    Outbound.
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: Prison Board BBS Mesquite Tx www.rdfig.net (1:124/5013)
  • From Robert Wolfe@1:116/18.2 to IB JOE on Sat Apr 13 21:35:36 2019
    Old message, I know, but this got tossed into my test system at
    bbs2.winserver.org and thought I would write a quick followup to this
    message
    and see if things were working as they should be.

    Yep, still working. Also still hoping RLogin from wildcat can be done
    in the near future.


    I asked Hector years ago to do something about the RLogin so that it would
    be
    compatible with Synchronet and Mystic and he said NO... Somebody will have
    to
    write a WCBasic file that would/should do the trick.

    Inbound rlogin would have to be a function of wcOnline.exe I would think, and not a function of a WCX.

    --- BBBS/2 v4.10 Toy-4
    * Origin: Omicron Theta/2 * Southaven MS * winserver.org (1:116/18.2)
  • From Robert Wolfe@1:116/18.2 to Ruben Figueroa on Sat Apr 13 21:36:20 2019
    I wonder if anyone out there who have the skills that would be willing
    to do
    so. Thanks or the info.

    Outbound rlogin or inbound?

    Outbound.

    Outbound should not be hard to do. What port does rlogin use?

    --- BBBS/2 v4.10 Toy-4
    * Origin: Omicron Theta/2 * Southaven MS * winserver.org (1:116/18.2)
  • From IB JOE@1:342/201 to Robert Wolfe on Sun Apr 14 07:22:00 2019
    I asked Hector years ago to do something about the RLogin so that it
    wou
    compatible with Synchronet and Mystic and he said NO... Somebody will
    ha
    write a WCBasic file that would/should do the trick.

    Inbound rlogin would have to be a function of wcOnline.exe I would
    think, and not a function of a WCX.


    When I was speaking I was thinking about outbound, even when I was talking
    with Hector at the time. He just stated that it was unsecure... maybe he was thinking about just outbound side of things.

    Still would be nice to have an outbound rLogin mod for WINServer that would expedite an automatic login like SBBS & Mystic do...

    IB JOE
    AKA Joe Schweier
    SysOp of Joe's Computer & BBS
    Telnet: joesbbs.com

    --- Mystic BBS v1.12 A39 2018/04/21 (Raspberry Pi/32)
    * Origin: Joe's Computer & BBS -=joesbbs.com=- (1:342/201)
  • From Robert Wolfe@1:116/18.3 to Ib Joe on Sun Apr 14 21:44:18 2019

    On Apr 14, 2019 07:28am, Ib Joe wrote to Robert Wolfe:

    When I was speaking I was thinking about outbound, even when I was
    talking with Hector at the time. He just stated that it was
    unsecure... maybe he was thinking about just outbound side of things.

    Hector is correct. RLOGIN is unsecure.

    Still would be nice to have an outbound rLogin mod for WINServer that would expedite an automatic login like SBBS & Mystic do...

    I might be able to write something that will let you do an interactive RLOGIN session to start off with, then go from there.

    ... Platinum Xpress & Wildcat!..... Nice!!!!
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: The Lean Angle BBS * Southaven MS * bbs2.winserver.or (1:116/18.3)
  • From IB JOE@1:342/201 to Robert Wolfe on Wed Apr 17 20:25:15 2019
    On 04/14/19, Robert Wolfe said the following...
    I might be able to write something that will let you do an interactive RLOGIN session to start off with, then go from there.

    ... Platinum Xpress & Wildcat!..... Nice!!!!
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: The Lean Angle BBS * Southaven MS * bbs2.winserver.or

    It'll just have to pass either the user name or the user handle and
    Synchronet or mystic bbs will log you on automatically

    :)

    IB JOE
    AKA Joe Schweier
    SysOp of Joe's Computer & BBS
    Telnet: joesbbs.com

    --- Mystic BBS v1.12 A39 2018/04/21 (Raspberry Pi/32)
    * Origin: Joe's Computer & BBS -=joesbbs.com=- (1:342/201)
  • From Robert Wolfe@1:116/17 to Ib Joe on Thu Apr 18 20:51:14 2019

    On Apr 17, 2019 08:31pm, Ib Joe wrote to Robert Wolfe:

    I might be able to write something that will let you do an interactive
    RLOGIN session to start off with, then go from there.

    It'll just have to pass either the user name or the user handle and Synchronet or mystic bbs will log you on automatically

    Yeah, but it's difficult when you get nothing but a blank screen on connect.

    ... Robert Wolfe <robert.wolfe@winserver.org>, Sysop, Omicron Theta BBS
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: Lean Angle BBS * Southaven MS * winserver.org (1:116/17)
  • From IB JOE@1:342/201 to Robert Wolfe on Fri Apr 19 11:15:15 2019
    On 04/18/19, Robert Wolfe said the following...


    On Apr 17, 2019 08:31pm, Ib Joe wrote to Robert Wolfe:

    I might be able to write something that will let you do an
    interacti
    RLOGIN session to start off with, then go from there.

    It'll just have to pass either the user name or the user handle and Synchronet or mystic bbs will log you on automatically

    Yeah, but it's difficult when you get nothing but a blank screen on connect.

    So, I'm not sure exactly what you're talking about.... I know that you have tested out a few BBS packages... but if I can say something that might
    already be known. Both Mystic and Synchronet have an automated. I can
    control whether the BBS reads the handle or the real name... either way, the host RLogin BBS is reading info from the BBS trying to login. I can recall from playing with Mystic BBS that I can play with the Rlogin command line to get the user to get the user to login with the Handle....

    So, all we need to do is to get WINS to do the same. If Hector cold make outbound calls pass info so that it may be compatible to the automated
    connect. I know this may not be something Hector's interested in that... he's more focused on his commercial clients than he his about hobby BBS goers.

    Anyway,

    IB JOE
    AKA Joe Schweier
    SysOp of Joe's Computer & BBS
    Telnet: joesbbs.com

    --- Mystic BBS v1.12 A39 2018/04/21 (Raspberry Pi/32)
    * Origin: Joe's Computer & BBS -=joesbbs.com=- (1:342/201)
  • From Robert Wolfe@1:116/18.3 to Ib Joe on Sat Apr 20 17:10:28 2019
    On 4/17/2019 8:31 PM, Ib Joe wrote to Robert Wolfe:

    It'll just have to pass either the user name or the user handle and Synchronet or mystic bbs will log you on automatically

    Yeah, but still having issues with getting something more than just a blank screen on connect.
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: The Lean Angle BBS * Southaven MS * bbs2.winserver.or (1:116/18.3)
  • From Robert Wolfe@1:116/17 to Datalus on Sat May 11 08:52:22 2019
    Hey Sam! :)

    On May 05, 2019 05:48pm, Datalus wrote to Robert Wolfe:

    Yes I'm talking about WinSserver did it with batch files no script.
    and I will fix the name thing when I'm done sorry,

    Not a problem :) Yeah, I got tired of having to deal with batch files so I wrote wcQWKnet to handle the polling, tossing, etc using WINServer's own internal code. It actually works out quite well and a number of people use
    it. Especially since I have made it a free product now :)

    I'm getting ready to put Winserver back up as well as soon as i sort some things out..

    Very cool! If you are interested, I can get you hooked up to WINSnet and XpressNet :)

    --- Mystic BBS v1.12 A43 2019/03/03 (Windows/32)
    * Origin: Deep Space Gateway Crystal River Florida (1:123/120)

    ... Platinum Xpress & Wildcat!..... Nice!!!!
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: Lean Angle BBS * Southaven MS * winserver.org (1:116/17)
  • From Datalus@1:123/120 to Robert Wolfe on Sat May 11 14:57:41 2019
    On 11 May 2019, Robert Wolfe said the following...
    Hey Sam! :)
    I'm getting ready to put Winserver back up as well as soon as i sort things out..

    Very cool! If you are interested, I can get you hooked up to WINSnet and XpressNet :)


    hey Robert, Are you using PX as front end or are you doing something similar
    to me I run irex and PX people say it will eliminate like Irex? As for
    Winsnet and xpressnet that will be fine as long as I dont need to poll them right away It seems when my system upgraded to 7 and new PX alot of my stuff was missing and I havent found my backup yet to see what I need to do to correct it. its been over a year since I messed with WC
    Thanks Sam

    --- Mystic BBS v1.12 A43 2019/03/03 (Windows/32)
    * Origin: Deep Space Gateway Crystal River Florida (1:123/120)
  • From Robert Wolfe@1:116/17 to Datalus on Sat May 11 15:35:22 2019

    On May 11, 2019 03:01pm, Datalus wrote to Robert Wolfe:

    hey Robert, Are you using PX as front end or are you doing something similar to me I run irex and PX people say it will eliminate like Irex?
    As for Winsnet and xpressnet that will be fine as long as I dont need to poll them right away It seems when my system upgraded to 7 and new PX
    alot of my stuff was missing and I havent found my backup yet to see
    what I need to do to correct it. its been over a year since I messed
    with WC Thanks Sam

    I use Internet ReX for binkp between my system and other systems that are not mailer-over-telnet capable. BINKP is still not built into PX yet, and at this point I doubt it ever will be. When you upgraded to the new PX, you probably did not tell it to upgrade only so the files were overwritten. That was fixed in the installer with the latest PX/WINS 7 update.

    ... Platinum Xpress & Wildcat!..... Nice!!!!
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: Lean Angle BBS * Southaven MS * winserver.org (1:116/17)
  • From Robert Wolfe@1:116/18.3 to Datalus on Tue May 14 08:29:36 2019
    Yes I'm talking about WinSserver did it with batch files no script.
    and I will fix the name thing when I'm done sorry,

    Yeah, I found it easier to do it with WINS' internal FTP code through a configurable WCX than through a batch file.
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: Omicorn Theta II * Southaven, MS * bbs2.winserver.org (1:116/18.3)
  • From Greg Youngblood@1:123/131 to Robert Wolfe on Wed May 22 10:09:35 2019
    Re: Re: SeaTel

    I wonder if anyone out there who have the skills that would be
    willin

    I sure it can be done being John Pritchett has one for Trade Wars 2002
    using rlogin port 513 for Wildcat 5,6,7


    -Greg Youngblood

    --- Virtual Advanced Ver 2 for DOS
    * Origin: The Ghetto BBS (1:123/131)
  • From mark lewis@1:3634/12.73 to Greg Youngblood on Wed May 22 19:18:52 2019

    OT: greg, */PLEASE/* turn off that binkp setting that forces secure sessions with all systems on your 1:123/130 so my system can finally deliver these netmails that have been waiting here for delivery/pickup since March and April... please???

    Date/Time: 09 Mar 19 06:48:26
    To : Greg Youngblood
    From : Platinum Xpress
    Subj : Areafix Report

    Date/Time: 09 Mar 19 06:48:26
    To : Greg Youngblood
    From : Platinum Xpress
    Subj : Areafix Report

    Date/Time: 02 Apr 19 00:57:14
    To : Greg Youngblood
    From : Robert Wolfe
    Subj : RE: Areafix Report

    BinkP got fatal error 'Unsecured session not allowed' from remote: 1:123/130@fidonet,21:4/119@fsxnet,57:57/7@gatornet,777:777/13@xnet,314:314/150@ pinet,169:1/113@battle,80:774/65@retronet,700:100/23 @spooknet,44:100/22@dorenet

    )\/(ark

    Always Mount a Scratch Monkey
    Do you manage your own servers? If you are not running an IDS/IPS yer doin' it wrong...
    ... There's no Betty Rubble in Flintstones Chewable Vitamins.
    ---
    * Origin: (1:3634/12.73)
  • From Sam Penwright@1:123/120 to Robert Wolfe on Wed Sep 11 11:15:33 2019
    On May 05, 2019 05:48pm, Datalus wrote to Robert Wolfe:
    so I wrote wcQWKnet to handle the polling, tossing, etc using
    WINServer's own internal code. It actually works out quite well and a number of people use it. Especially since I have made it a free product now :)

    Okay Ill give it a try since for some reason my batch doesn't seem too work
    any more. Its say authentication failure and I don't know why it works on my laptop but not my server. I copied from laptop to server.
    Very cool! If you are interested, I can get you hooked up to WINSnet and XpressNet :)

    Okay But I'm having trouble with getting FSX and Survnet and VKradio polling with out instructions it really hard to get the other networks to poll and receive mail. Any help in this matter would be appreciated. I'll buy the
    first round of beer!
    Thanks Sam Penwright

    --- Mystic BBS v1.12 A43 2019/03/03 (Windows/32)
    * Origin: Deep Space Gateway Crystal River Florida (1:123/120)
  • From Robert Wolfe@1:261/20 to Sam Penwright on Fri Sep 13 17:11:03 2019
    Okay Ill give it a try since for some reason my batch doesn't seem
    too work any more. Its say authentication failure and I don't know
    why it works on my laptop but not my server. I copied from laptop to
    server.

    Sweet. Let me know if you have any questions.

    Very cool! If you are interested, I can get you hooked up to WI
    XpressNet :)

    Okay But I'm having trouble with getting FSX and Survnet and VKradio
    polling with out instructions it really hard to get the other
    networks to poll and receive mail. Any help in this matter would be appreciated. I'll buy the first round of beer!

    What kinds of issues are you having? I get fsxNet on both my Mystic and on my WINServer systems.


    --- InterEcho 1.20
    * Origin: Omicron Theta/WC4 * Memphis TN * wc4.winserver.org (1:261/20)
  • From Robert Wolfe@1:116/18.62 to Ib Joe on Sun Mar 15 23:10:35 2020
    Robert do you use WINS to poll any qwk mail??

    Yes, I do.


    --- InterEcho 1.20
    * Origin: Poseidon SoftWorx, Southaven MS, U.S.A. (1:116/18.62)
  • From Robert Wolfe@1:116/18.62 to Ib Joe on Sun Mar 15 23:11:01 2020
    Is that a utility you made?? I use to use wcqwk and it worked
    okay... never had a problem with it. I have forgot how I made it
    run. I need to figure out how to get a cfg file to poll vert.

    Yes, wcQWKnet is a WCX that I wrote and maintain.


    --- InterEcho 1.20
    * Origin: Poseidon SoftWorx, Southaven MS, U.S.A. (1:116/18.62)
  • From Joe Schweier@1:342/200 to Robert Wolfe on Tue Mar 17 12:44:32 2020
    Is that a utility you made?? I use to use wcqwk and it worked
    okay... never had a problem with it. I have forgot how I made it
    run. I need to figure out how to get a cfg file to poll vert.

    Yes, wcQWKnet is a WCX that I wrote and maintain.

    OMG, this is an old old message...

    I tried that in the past and couldn't get it to work... I run/ran a batch file using iFTP as a client to do QWK, works fine. U think Hector would have done something internal, it would have been nothing for him to do.

    Joe

    ---
    * Origin: Joe's Mail System 1:342/200 -=joesbbs.com=- (1:342/200)
  • From Robert Wolfe@1:116/18.62 to Joe Schweier on Thu Mar 19 19:16:21 2020
    Yes, wcQWKnet is a WCX that I wrote and maintain.

    OMG, this is an old old message...

    Sorry, guess I just needed a post to make :)

    I tried that in the past and couldn't get it to work... I run/ran a
    batch file using iFTP as a client to do QWK, works fine. U think
    Hector would have done something internal, it would have been
    nothing for him to do.

    I agree. Yeah, I have been thinking about giving iFTP a try, but with wcQWKnet
    4.0 about to be released, I would like that to be tested more before I make that commitment.


    --- InterEcho 1.20
    * Origin: Poseidon SoftWorx, Southaven MS, U.S.A. (1:116/18.62)
  • From RON PETERS@1:123/140 to JOE SCHWEIER on Thu Mar 19 17:56:34 2020
    Hello Joe

    I tried that in the past and couldn't get it to work... I run/ran a
    batch file using iFTP as a client to do QWK, works fine.
    U think Hector would have done
    something internal, it would have been nothing for him to do.

    Hector Santos made QWK via FTP available on the Server side of Wildcat!
    more than ten years ago.

    I am retired now, but I ran QWK/FTP for my small business for several
    years with customers using various FTP Clients.

    It has to be manually setup and configured and there is more than one
    approach that can be used. In a nutshell its not there by default!

    I recall it being discussed in the Santronics Mailing Lists from time
    to time so if anyone is interested on the server side setup they could
    ask via the SSI list

    Best Wishes



    Ron

    --- Platinum Xpress/Win/WINServer v3.0pr5
    * Origin: Fido Since 1991 | QWK by Web | BBS.FIDOSYSOP.ORG (1:123/140)
  • From Robert Wolfe@1:116/17 to Ron Peters on Sat Mar 21 19:23:10 2020
    Hector Santos made QWK via FTP available on the Server side of Wildcat!
    more than ten years ago.

    So where is it documented? Plus I don't think it's done quite the same
    way as Synchronet and Mystic do it to where the QWK packet is always "available" for downloading in the root directory of the FTP server.

    I am retired now, but I ran QWK/FTP for my small business for several

    Please, care to share the documentation on this?
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: Lean Angle BBS * Southaven MS * winserver.org (1:116/17)