• f1d0 address

    From Morgan Collins@1:218/840 to All on Wed Sep 1 14:51:38 2021

    Hi All,

    Just found a Hub from which I'm able to subscribe to this Echo. I was going to post and request to be added to the ipv6 list, but it appears I've magically been detected and added. Amazing!

    How does one go about getting one of these?

    Has a ::f1d0:<zone>:<net>:<node> style host address.
    (zone, net, node in decimal notation)

    Morgan
    --- SBBSecho 3.14-Linux
    * Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)
  • From Alexey Vissarionov@2:5020/545 to Morgan Collins on Thu Sep 2 01:18:18 2021
    Good ${greeting_time}, Morgan!

    01 Sep 2021 14:51:38, you wrote to All:

    How does one go about getting one of these?
    Has a ::f1d0:<zone>:<net>:<node> style host address.
    (zone, net, node in decimal notation)

    Normally you would have own /64 subnet and may use any address you like.


    --
    Alexey V. Vissarionov aka Gremlin from Kremlin
    gremlin.ru!gremlin; +vii-cmiii-ccxxix-lxxix-xlii

    ... GPG: 8832FE9FA791F7968AC96E4E909DAC45EF3B1FA8 @ hkp://keys.gnupg.net
    --- /bin/vi
    * Origin: ::1 (2:5020/545)
  • From Morgan Collins@1:218/840 to Michiel van der Vlist on Thu Sep 2 07:21:20 2021
    How does one go about getting one of these?

    Has a ::f1d0:<zone>:<net>:<node> style host address.
    (zone, net, node in decimal notation)

    You have to manually configure it as a fixed address. I see you run Linux, so I can't help you there. I am not famliar with Linux.

    Okay. I know just enough about ip6 to be dangerious, but I'm not an expert by any means. I'll do some googling and see what the steps are. I know my host will assign me an ip6 block if I request it.... so that's probably the first step. But I don't want to break anything in the process.

    I'll poke around, and will continute to monitor this echo.

    Glad to be here!

    Morgan
    --- SBBSecho 3.14-Linux
    * Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)
  • From Richard Menedetter@2:310/31 to Morgan Collins on Sat Sep 4 12:10:48 2021
    Hi Morgan!

    01 Sep 2021 14:51, from Morgan Collins -> All:

    How does one go about getting one of these?
    Has a ::f1d0:<zone>:<net>:<node> style host address.
    (zone, net, node in decimal notation)

    Simply configure a host part that is in line with that requirement: ricsi@menedetter:~$ nslookup menedetter.net
    Name: menedetter.net
    Address: 2a03:4000:4a:c5f::1

    ricsi@menedetter:~$ nslookup fido.ricsi.priv.at
    Name: fido.ricsi.priv.at
    Address: 2a03:4000:4a:c5f:f1d0:2:310:31

    As you see simply assign the correct address.

    In my /etc/network/interfaces
    iface eth0 inet6 static
    address 2a03:4000:4a:c5f:f1d0:2:310:31/64
    gateway fe80::1

    iface eth0 inet6 static
    address 2a03:4000:4a:c5f::1/64
    gateway fe80::1

    CU, Ricsi

    ... The difference between a woman with PMS and a pit bull: Lipstick
    --- GoldED+/LNX
    * Origin: If we're both going to Hell, maybe we should carpool? (2:310/31)
  • From Kees van Eeten@2:280/5003.4 to Richard Menedetter on Sat Sep 4 18:02:02 2021
    Hello Richard!

    04 Sep 21 12:10, you wrote to Morgan Collins:

    As you see simply assign the correct address.

    In my /etc/network/interfaces
    iface eth0 inet6 static
    address 2a03:4000:4a:c5f:f1d0:2:310:31/64
    gateway fe80::1

    iface eth0 inet6 static
    address 2a03:4000:4a:c5f::1/64
    gateway fe80::1

    Another way could be.

    iface eth0 inet6 auto
    pre-up ip token set ::f1d0:2:310:31 dev $IFACE


    Kees

    --- GoldED+/LNX 1.1.5--b20180707
    * Origin: As for me, all I know is that, I know nothing. (2:280/5003.4)