Joystick-operated robot could help surgeons treat stroke remotely
The system could provide teleoperated endovascular treatment to patients during the critical time window after a stroke begins.
Date:
April 13, 2022
Source:
Massachusetts Institute of Technology
Summary:
Engineers developed a telerobotic system to help surgeons remotely
treat patients experiencing stroke or aneurysm. With a modified
joystick, surgeons may control a robotic arm at another hospital
to operate on a patient.
FULL STORY ==========================================================================
MIT engineers have developed a telerobotic system to help surgeons quickly
and remotely treat patients experiencing a stroke or aneurysm. With a
modified joystick, surgeons in one hospital may control a robotic arm
at another location to safely operate on a patient during a critical
window of time that could save the patient's life and preserve their
brain function.
==========================================================================
The robotic system, whose movement is controlled through magnets, is
designed to remotely assist in endovascular intervention -- a procedure performed in emergency situations to treat strokes caused by a blood
clot. Such interventions normally require a surgeon to manually guide
a thin wire to the clot, where it can physically clear the blockage or
deliver drugs to break it up.
One limitation of such procedures is accessibility: Neurovascular surgeons
are often based at major medical institutions that are difficult to reach
for patients in remote areas, particularly during the "golden hour"
-- the critical period after a stroke's onset, during which treatment
should be administered to minimize any damage to the brain.
The MIT team envisions that its robotic system could be installed at
smaller hospitals and remotely guided by trained surgeons at larger
medical centers.
The system includes a medical-grade robotic arm with a magnet attached
to its wrist. With a joystick and live imaging, an operator can adjust
the magnet's orientation and manipulate the arm to guide a soft and thin magnetic wire through arteries and vessels.
The researchers demonstrated the system in a "phantom," a transparent
model with vessels replicating complex arteries of the brain. With just
an hour of training, neurosurgeons were able to remotely control the
robot's arm to guide a wire through a maze of vessels to reach target
locations in the model.
"We imagine, instead of transporting a patient from a rural area to a
large city, they could go to a local hospital where nurses could set up
this system.
A neurosurgeon at a major medical center could watch live imaging of
the patient and use the robot to operate in that golden hour. That's our
future dream," says Xuanhe Zhao, a professor of mechanical engineering
and of civil and environmental engineering at MIT.
==========================================================================
Zhao and his team have published their findings today in Science
Robotics. MIT co-authors include lead author Yoonho Kim, Emily Genevriere,
and Jaehun Choe, along with Pablo Harker, Robert Regenhardt, Justin
Vranic, Adam Dmytriw, and Aman Patel at Massachusetts General Hospital
(MGH), and Marcin Balicki of Philips Research North America.
Tilt and twist Endovascular surgery is a specialized, minimally invasive procedure that involves carefully twisting and guiding a thin medical
wire through the body's arteries and vessels to a target location, in a
way that avoids damaging vessel walls. The procedure typically requires
years of training for a surgeon to master.
Robotic systems are being explored as assistive technologies in
endovascular surgery. These systems mainly involve motor drives
that advance and retract a wire while twisting it through the body's vasculature.
"But having a robot twist with the same level of sophistication
[as a surgeon] is challenging," Kim notes. "Our system is based on a fundamentally different mechanism." The team's new system builds on
work from 2019, in which they demonstrated steering a magnetically
controlled thread through a life-sized silicone model of the brain's
blood vessels. They did so at the time using a handheld magnet, about
the size of a soup can, that they manually manipulated.
==========================================================================
They have since affixed the magnet to the end of a medical-grade robotic
arm, which can be steered using a small joystick knob on a mouse. By
tilting the joystick, researchers can tilt the magnet in an orientation
that a magnetic wire can follow. Buttons on the mouse control a set of motorized linear drives, which advance and retract the wire to make it
move forward and back.
The wire is as thin and flexible as a conventional neurovascular
guidewire, with a soft, magnetically responsive tip that follows and
bends in the direction of a magnetic field.
Finding a path The team tested the robotic system in MGH's Catheter Lab
-- an operating room with standard medical imaging equipment used in endovascular procedures. The researchers installed the robotic arm in the
lab, along with a life-sized silicone model of blood vessels. They set
the joystick, along with a monitor displaying a live video of the model,
in a control room. From there, an operator watched the video while using
the joystick to remotely steer the wire through the vessels.
The team trained a group of neurosurgeons to use the robotic system. After
just one hour of training, each surgeon was able to successfully operate
the system to guide the wire through complex vessels that are difficult
to navigate with a manual guidewire.
The team also used the robotic system to clear simulated clots in
difficult-to- reach areas in the model. They steered the guidewire
through vessels, and around sharp corners and turns, to reach regions
where the researchers simulated clots. Once they guided the wire to the
clot, the surgeons proceeded with standard endovascular methods to thread
a microcatheter along the wire to the site of the clot. They retracted
the wire, leaving the catheter, which they then applied to successfully
remove the clot.
"The primary purpose of the magnetic guidewire is to get to the target
location quickly and safely, so that standard devices like microcatheters
can be used to deliver therapeutics," Kim says. "Our system is like
a pathfinder." He hopes that the teleoperated system can help more
patients receive time- critical treatment. He also sees benefits for
surgeons, who typically perform such vascular procedures in the same
room as the patient, while being exposed to radiation from X-ray imaging.
"The neurosurgeons can operate the robot in another room or even in
another city without repeated exposure to X-rays," Zhao says. "We are
truly excited about the potential impact of this technology on global
health, given that stroke is one of the leading causes of death and
long-term disability." This research was supported in part by the
National Science Foundation, the National Institutes of Health, and
Phillips Research of North America.
========================================================================== Story Source: Materials provided by
Massachusetts_Institute_of_Technology. Original written by Jennifer
Chu. Note: Content may be edited for style and length.
========================================================================== Related Multimedia:
* Images_and_video_of_telerobotic_system ========================================================================== Journal Reference:
1. Yoonho Kim, Emily Genevriere, Pablo Harker, Jaehun Choe, Marcin
Balicki,
Robert W. Regenhardt, Justin E. Vranic, Adam A. Dmytriw, Aman
B. Patel, Xuanhe Zhao. Telerobotic neurovascular interventions
with magnetic manipulation. Science Robotics, 2022; 7 (65) DOI:
10.1126/ scirobotics.abg9907 ==========================================================================
Link to news story:
https://www.sciencedaily.com/releases/2022/04/220413141617.htm
--- up 6 weeks, 2 days, 10 hours, 51 minutes
* Origin: -=> Castle Rock BBS <=- Now Husky HPT Powered! (1:317/3)