A new heat engine with no moving parts is as efficient as a steam
turbine
Date:
April 13, 2022
Source:
Massachusetts Institute of Technology
Summary:
Engineers have developed a heat engine with no moving parts that
is as efficient as a steam turbine. The design could someday enable
a fully decarbonized power grid, researchers say.
FULL STORY ========================================================================== Engineers at MIT and the National Renewable Energy Laboratory (NREL) have designed a heat engine with no moving parts. Their new demonstrations show
that it converts heat to electricity with over 40 percent efficiency --
a performance better than that of traditional steam turbines.
==========================================================================
The heat engine is a thermophotovoltaic (TPV) cell, similar to a solar
panel's photovoltaic cells, that passively captures high-energy photons
from a white- hot heat source and converts them into electricity. The
team's design can generate electricity from a heat source of between
1,900 to 2,400 degrees Celsius, or up to about 4,300 degrees Fahrenheit.
The researchers plan to incorporate the TPV cell into a grid-scale
thermal battery. The system would absorb excess energy from renewable
sources such as the sun and store that energy in heavily insulated banks
of hot graphite. When the energy is needed, such as on overcast days,
TPV cells would convert the heat into electricity, and dispatch the
energy to a power grid.
With the new TPV cell, the team has now successfully demonstrated the main parts of the system in separate, small-scale experiments. They are working
to integrate the parts to demonstrate a fully operational system. From
there, they hope to scale up the system to replace fossil-fuel-driven
power plants and enable a fully decarbonized power grid, supplied entirely
by renewable energy.
"Thermophotovoltaic cells were the last key step toward demonstrating
that thermal batteries are a viable concept," says Asegun Henry, the
Robert N. Noyce Career Development Professor in MIT's Department of
Mechanical Engineering.
"This is an absolutely critical step on the path to proliferate renewable energy and get to a fully decarbonized grid." Henry and his collaborators
have published their results today in the journal Nature. Co-authors at
MIT include Alina LaPotin, Kevin Schulte, Kyle Buznitsky, Colin Kelsall,
Andrew Rohskopf, and Evelyn Wang, the Ford Professor of Engineering and
head of the Department of Mechanical Engineering, along with collaborators
at NREL in Golden, Colorado.
========================================================================== Jumping the gap More than 90 percent of the world's electricity comes
from sources of heat such as coal, natural gas, nuclear energy, and concentrated solar energy. For a century, steam turbines have been the industrial standard for converting such heat sources into electricity.
On average, steam turbines reliably convert about 35 percent of a heat
source into electricity, with about 60 percent representing the highest efficiency of any heat engine to date. But the machinery depends on
moving parts that are temperature- limited. Heat sources higher than
2,000 degrees Celsius, such as Henry's proposed thermal battery system,
would be too hot for turbines.
In recent years, scientists have looked into solid-state alternatives --
heat engines with no moving parts, that could potentially work efficiently
at higher temperatures.
"One of the advantages of solid-state energy converters are that they
can operate at higher temperatures with lower maintenance costs because
they have no moving parts," Henry says. "They just sit there and reliably generate electricity." Thermophotovoltaic cells offered one exploratory
route toward solid-state heat engines. Much like solar cells, TPV cells
could be made from semiconducting materials with a particular bandgap --
the gap between a material's valence band and its conduction band. If a
photon with a high enough energy is absorbed by the material, it can kick
an electron across the bandgap, where the electron can then conduct, and thereby generate electricity -- doing so without moving rotors or blades.
==========================================================================
To date, most TPV cells have only reached efficiencies of around
20 percent, with the record at 32 percent, as they have been made
of relatively low-bandgap materials that convert lower-temperature,
low-energy photons, and therefore convert energy less efficiently.
Catching light In their new TPV design, Henry and his colleagues looked
to capture higher- energy photons from a higher-temperature heat source, thereby converting energy more efficiently. The team's new cell does so
with higher-bandgap materials and multiple junctions, or material layers, compared with existing TPV designs.
The cell is fabricated from three main regions: a high-bandgap alloy,
which sits over a slightly lower-bandgap alloy, underneath which is a mirror-like layer of gold. The first layer captures a heat source's highest-energy photons and converts them into electricity, while
lower-energy photons that pass through the first layer are captured by
the second and converted to add to the generated voltage. Any photons
that pass through this second layer are then reflected by the mirror,
back to the heat source, rather than being absorbed as wasted heat.
The team tested the cell's efficiency by placing it over a heat flux
sensor - - a device that directly measures the heat absorbed from the
cell. They exposed the cell to a high-temperature lamp and concentrated
the light onto the cell.
They then varied the bulb's intensity, or temperature, and observed
how the cell's power efficiency -- the amount of power it produced,
compared with the heat it absorbed -- changed with temperature. Over a
range of 1,900 to 2,400 degrees Celsius, the new TPV cell maintained an efficiency of around 40 percent.
"We can get a high efficiency over a broad range of temperatures relevant
for thermal batteries," Henry says.
The cell in the experiments is about a square centimeter. For a grid-scale thermal battery system, Henry envisions the TPV cells would have to scale
up to about 10,000 square feet (about a quarter of a football field),
and would operate in climate-controlled warehouses to draw power from
huge banks of stored solar energy. He points out that an infrastructure
exists for making large-scale photovoltaic cells, which could also be
adapted to manufacture TPVs.
"There's definitely a huge net positive here in terms of sustainability,"
Henry says. "The technology is safe, environmentally benign in its
life cycle, and can have a tremendous impact on abating carbon dioxide emissions from electricity production." This research was supported,
in part, by the U.S. Department of Energy.
========================================================================== Story Source: Materials provided by
Massachusetts_Institute_of_Technology. Original written by Jennifer
Chu. Note: Content may be edited for style and length.
========================================================================== Journal Reference:
1. Alina LaPotin, Kevin L. Schulte, Myles A. Steiner, Kyle Buznitsky,
Colin
C. Kelsall, Daniel J. Friedman, Eric J. Tervo, Ryan M. France,
Michelle R. Young, Andrew Rohskopf, Shomik Verma, Evelyn N. Wang,
Asegun Henry.
Thermophotovoltaic efficiency of 40%. Nature, 2022; 604 (7905):
287 DOI: 10.1038/s41586-022-04473-y ==========================================================================
Link to news story:
https://www.sciencedaily.com/releases/2022/04/220413131137.htm
--- up 6 weeks, 2 days, 10 hours, 51 minutes
* Origin: -=> Castle Rock BBS <=- Now Husky HPT Powered! (1:317/3)