• User Port Connector Enclosure

    From Charles Gutman@3:770/3 to All on Mon Aug 17 21:40:48 2020
    I'm working on an RS232 Cable, but have came to realize that it looks crappy. Does anyone h or ppen to know where I may locate a thin enclosure for the user port connector end near the C64?
    The other end looks beautiful and I really desire to make it look like an "actual cable."

    Thanks so much

    Charles

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
  • From Robert Roland@3:770/3 to charlesgutman@gmail.com on Tue Aug 18 21:02:49 2020
    On Mon, 17 Aug 2020 21:40:48 -0700 (PDT), Charles Gutman <charlesgutman@gmail.com> wrote:

    Does anyone h or ppen to know where I may locate a thin enclosure for the user port connector end near the C64?

    Would a 3D printed one be acceptable?

    There are models available for free download. For example: https://www.thingiverse.com/thing:3368773
    --
    RoRo

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
  • From Charles Gutman@3:770/3 to Robert Roland on Sun Oct 18 20:45:51 2020
    On Tuesday, August 18, 2020 at 12:02:53 PM UTC-7, Robert Roland wrote:
    On Mon, 17 Aug 2020 21:40:48 -0700 (PDT), Charles Gutman <charlesgutman@gmail.com> wrote:

    Does anyone h or ppen to know where I may locate a thin enclosure for the
    user port connector end near the C64?

    Would a 3D printed one be acceptable?

    There are models available for free download. For example: https://www.thingiverse.com/thing:3368773
    --
    RoRo

    Actually I'm not skilled enough to work this concept. I was just thinking of a minor 1 timer project with two pieces of thin plastic with 4 corner holes drilled in it to cover my telnet cable end.

    Thank you

    Charles

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)