1. Forum
  2. FidoNet
  3. ALT.OS.LINUX.MAGEIA

  • MCC under mga v8 X64

    From Vincent Coen@2:250/1 to All on Sun Sep 18 19:28:26 2022
    Hello All!

    For some months when ever I try and run MCC I get errors as in :

    .. - ..
    sudo mcc
    Too late to run INIT block at /usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line 257.
    Ignore the following Glib::Object::Introspection & Gtk3 warnings
    Subroutine Gtk3::main redefined at /usr/share/perl5/vendor_perl/Gtk3.pm
    line 539.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
    line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
    line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
    line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
    line 210.
    "cannot run /usr/sbin/isodumper" since it is not installed [Writing ISO] at /usr/libexec/drakconf line 833.
    Oops, secure memory pool already initialized
    Oops, secure memory pool already initialized
    Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you
    want Webferent signal

    (WebKitWebProcess:2382156): Gdk-ERROR **: 19:22:23.961: The program 'WebKitWebPran X Window System error.
    This probably reflects a bug in the program.
    The error was 'BadValue (integer parameter out of range for operation)'.
    (Details: serial 199 error_code 2 request_code 154 (GLX) minor_code 34)
    (Note to programmers: normally, X errors are reported asynchronously;
    that is, you will receive the error a while after causing it.
    To debug your program, run it with the GDK_SYNCHRONIZE environment
    variable to change this behavior. You can then get a meaningful
    backtrace from your debugger if you break on the gdk_x_error()
    function.)
    Oops, secure memory pool already initialized
    Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you
    want Webferent signal
    .. - ..

    I moved /etc/mcc.cong to mcc.conf.save to see if thet would help but no -
    it recreated it but with same results.

    This error is stopping me checking or adding software.

    Can any one help me please ?


    Vincent


    SEEN-BY: 25/0 250/0 1 2 3 4 5 6 12 263/0 467/4
  • From David W. Hodgins@2:250/1 to All on Sun Sep 18 20:01:49 2022
    On Sun, 18 Sep 2022 14:28:26 -0400, Vincent Coen <VBCoen@gmail.com> wrote:

    Hello All!

    For some months when ever I try and run MCC I get errors as in :

    . - ..
    sudo mcc
    Too late to run INIT block at /usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line 257.
    Ignore the following Glib::Object::Introspection & Gtk3 warnings
    Subroutine Gtk3::main redefined at /usr/share/perl5/vendor_perl/Gtk3.pm
    line 539.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
    line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
    line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
    line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
    line 210.
    "cannot run /usr/sbin/isodumper" since it is not installed [Writing ISO] at /usr/libexec/drakconf line 833.
    Oops, secure memory pool already initialized
    Oops, secure memory pool already initialized
    Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you
    want Webferent signal

    Up to this point, the messages are normal.

    (WebKitWebProcess:2382156): Gdk-ERROR **: 19:22:23.961: The program 'WebKitWebPran X Window System error.
    This probably reflects a bug in the program.
    The error was 'BadValue (integer parameter out of range for operation)'.
    (Details: serial 199 error_code 2 request_code 154 (GLX) minor_code 34)
    (Note to programmers: normally, X errors are reported asynchronously;
    that is, you will receive the error a while after causing it.
    To debug your program, run it with the GDK_SYNCHRONIZE environment
    variable to change this behavior. You can then get a meaningful
    backtrace from your debugger if you break on the gdk_x_error()
    function.)
    Oops, secure memory pool already initialized
    Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you
    want Webferent signal
    . - ..

    I moved /etc/mcc.cong to mcc.conf.save to see if thet would help but no -
    it recreated it but with same results.

    This error is stopping me checking or adding software.

    Can any one help me please ?

    Install updates using "sudo urpmi --auto-update" and see if that fixes the problem with mcc.

    Report back if it doesn't.

    Regards, Dave Hodgins.

    --- MBSE BBS v1.0.8 (Linux-x86_64)
    * Origin: A noiseless patient Spider (2:250/1@fidonet)
  • From David W. Hodgins@2:250/1 to All on Sun Sep 18 19:58:34 2022
    On Sun, 18 Sep 2022 14:28:26 -0400, Vincent Coen <VBCoen@gmail.com> wrote:

    (WebKitWebProcess:2382156): Gdk-ERROR

    --- MBSE BBS v1.0.8 (Linux-x86_64)
    * Origin: A noiseless patient Spider (2:250/1@fidonet)
  • From Vincent Coen@2:250/1 to David W. Hodgins on Mon Sep 19 00:44:20 2022
    Hello David!

    Sunday September 18 2022 20:01, David W. Hodgins wrote to All:

    On Sun, 18 Sep 2022 14:28:26 -0400, Vincent Coen <VBCoen@gmail.com>
    wrote:

    Hello All!

    For some months when ever I try and run MCC I get errors as in :

    . - ..
    sudo mcc
    Too late to run INIT block at
    /usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line 257.
    Ignore the following Glib::Object::Introspection & Gtk3 warnings
    Subroutine Gtk3::main redefined at
    /usr/share/perl5/vendor_perl/Gtk3.pm line 539. GLib-GObject-CRITICAL
    **: g_boxed_type_register_static: assertion 'g_type_from_name (name)
    == 0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
    'g_type_from_name (name) == 0' failed at
    /usr/lib64/perl5/DynaLoader.pm line 210. GLib-GObject-CRITICAL **:
    g_boxed_type_register_static: assertion 'g_type_from_name (name) ==
    0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
    'g_type_from_name (name) == 0' failed at
    /usr/lib64/perl5/DynaLoader.pm line 210. "cannot run
    /usr/sbin/isodumper" since it is not installed [Writing ISO] at
    /usr/libexec/drakconf line 833. Oops, secure memory pool already
    initialized Oops, secure memory pool already initialized Overriding
    existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you want
    Webferent signal

    Up to this point, the messages are normal.

    (WebKitWebProcess:2382156): Gdk-ERROR **: 19:22:23.961: The program
    'WebKitWebPran X Window System error.
    This probably reflects a bug in the program.
    The error was 'BadValue (integer parameter out of range for
    operation)'.
    (Details: serial 199 error_code 2 request_code 154 (GLX)
    minor_code 34)
    (Note to programmers: normally, X errors are reported
    asynchronously;
    that is, you will receive the error a while after causing it.
    To debug your program, run it with the GDK_SYNCHRONIZE
    environment
    variable to change this behavior. You can then get a meaningful
    backtrace from your debugger if you break on the gdk_x_error()
    function.)
    Oops, secure memory pool already initialized
    Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if
    you want Webferent signal . - ..

    I moved /etc/mcc.cong to mcc.conf.save to see if thet would help but
    no - it recreated it but with same results.

    This error is stopping me checking or adding software.

    Can any one help me please ?

    Install updates using "sudo urpmi --auto-update" and see if that fixes
    the problem with mcc.

    Report back if it doesn't.

    Nope says packages are up to date followed by a long list of packages that
    are now orphaned which I am ignoring as I did this a few years back and it caused chaos !

    What is the name of the mcc packages/s and the instruction to re-install
    may be that will work :(



    Vincent


    SEEN-BY: 25/0 250/0 1 2 3 4 5 6 12 263/0 467/4
  • From David W. Hodgins@2:250/1 to All on Mon Sep 19 03:30:13 2022
    On Sun, 18 Sep 2022 19:44:20 -0400, Vincent Coen <VBCoen@gmail.com> wrote:

    Hello David!

    Sunday September 18 2022 20:01, David W. Hodgins wrote to All:

    On Sun, 18 Sep 2022 14:28:26 -0400, Vincent Coen <VBCoen@gmail.com>
    wrote:

    Hello All!

    For some months when ever I try and run MCC I get errors as in :

    . - ..
    sudo mcc
    Too late to run INIT block at
    /usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line 257.
    Ignore the following Glib::Object::Introspection & Gtk3 warnings
    Subroutine Gtk3::main redefined at
    /usr/share/perl5/vendor_perl/Gtk3.pm line 539. GLib-GObject-CRITICAL
    **: g_boxed_type_register_static: assertion 'g_type_from_name (name)
    == 0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
    'g_type_from_name (name) == 0' failed at
    /usr/lib64/perl5/DynaLoader.pm line 210. GLib-GObject-CRITICAL **:
    g_boxed_type_register_static: assertion 'g_type_from_name (name) ==
    0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
    'g_type_from_name (name) == 0' failed at
    /usr/lib64/perl5/DynaLoader.pm line 210. "cannot run
    /usr/sbin/isodumper" since it is not installed [Writing ISO] at
    /usr/libexec/drakconf line 833. Oops, secure memory pool already
    initialized Oops, secure memory pool already initialized Overriding
    existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you want
    Webferent signal

    Up to this point, the messages are normal.

    (WebKitWebProcess:2382156): Gdk-ERROR **: 19:22:23.961: The program
    'WebKitWebPran X Window System error.
    This probably reflects a bug in the program.
    The error was 'BadValue (integer parameter out of range for
    operation)'.
    (Details: serial 199 error_code 2 request_code 154 (GLX)
    minor_code 34)
    (Note to programmers: normally, X errors are reported
    asynchronously;
    that is, you will receive the error a while after causing it.
    To debug your program, run it with the GDK_SYNCHRONIZE
    environment
    variable to change this behavior. You can then get a meaningful
    backtrace from your debugger if you break on the gdk_x_error()
    function.)
    Oops, secure memory pool already initialized
    Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if
    you want Webferent signal . - ..

    I moved /etc/mcc.cong to mcc.conf.save to see if thet would help but
    no - it recreated it but with same results.

    This error is stopping me checking or adding software.

    Can any one help me please ?

    Install updates using "sudo urpmi --auto-update" and see if that fixes
    the problem with mcc.

    Report back if it doesn't.

    Nope says packages are up to date followed by a long list of packages that are now orphaned which I am ignoring as I did this a few years back and it caused chaos !

    What is the name of the mcc packages/s and the instruction to re-install
    may be that will work :(

    $ rpm -q -f /usr/bin/mcc
    drakconf-13.27-1.mga8

    What version of the webkit2 package is installed (that's the one that's failing)?
    I have ...
    $ rpm -q webkit2
    webkit2-2.36.7-1.mga8

    Regards, Dave Hodgins

    --- MBSE BBS v1.0.8 (Linux-x86_64)
    * Origin: A noiseless patient Spider (2:250/1@fidonet)
  • From Vincent Coen@2:250/1 to David W. Hodgins on Mon Sep 19 14:59:35 2022
    Hello David!

    Monday September 19 2022 03:30, David W. Hodgins wrote to All:

    On Sun, 18 Sep 2022 19:44:20 -0400, Vincent Coen <VBCoen@gmail.com>
    wrote:

    Hello David!

    Sunday September 18 2022 20:01, David W. Hodgins wrote to All:

    On Sun, 18 Sep 2022 14:28:26 -0400, Vincent Coen
    <VBCoen@gmail.com>
    wrote:

    Hello All!

    For some months when ever I try and run MCC I get errors as in :

    . - ..
    sudo mcc
    Too late to run INIT block at
    /usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line
    257.
    Ignore the following Glib::Object::Introspection & Gtk3 warnings
    Subroutine Gtk3::main redefined at
    /usr/share/perl5/vendor_perl/Gtk3.pm line 539.
    GLib-GObject-CRITICAL
    **: g_boxed_type_register_static: assertion 'g_type_from_name
    (name)
    == 0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static:
    assertion
    'g_type_from_name (name) == 0' failed at
    /usr/lib64/perl5/DynaLoader.pm line 210. GLib-GObject-CRITICAL
    **:
    g_boxed_type_register_static: assertion 'g_type_from_name (name)
    ==
    0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static:
    assertion
    'g_type_from_name (name) == 0' failed at
    /usr/lib64/perl5/DynaLoader.pm line 210. "cannot run
    /usr/sbin/isodumper" since it is not installed [Writing ISO] at
    /usr/libexec/drakconf line 833. Oops, secure memory pool already
    initialized Oops, secure memory pool already initialized
    Overriding
    existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you
    want
    Webferent signal

    Up to this point, the messages are normal.

    (WebKitWebProcess:2382156): Gdk-ERROR **: 19:22:23.961: The
    program
    'WebKitWebPran X Window System error.
    This probably reflects a bug in the program.
    The error was 'BadValue (integer parameter out of range for
    operation)'.
    (Details: serial 199 error_code 2 request_code 154 (GLX)
    minor_code 34)
    (Note to programmers: normally, X errors are reported
    asynchronously;
    that is, you will receive the error a while after causing it.
    To debug your program, run it with the GDK_SYNCHRONIZE
    environment
    variable to change this behavior. You can then get a
    meaningful
    backtrace from your debugger if you break on the
    gdk_x_error()
    function.)
    Oops, secure memory pool already initialized
    Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC
    if
    you want Webferent signal . - ..

    I moved /etc/mcc.cong to mcc.conf.save to see if thet would help
    but
    no - it recreated it but with same results.

    This error is stopping me checking or adding software.

    Can any one help me please ?

    Install updates using "sudo urpmi --auto-update" and see if that
    fixes
    the problem with mcc.

    Report back if it doesn't.

    Nope says packages are up to date followed by a long list of
    packages that are now orphaned which I am ignoring as I did this a
    few years back and it caused chaos !

    What is the name of the mcc packages/s and the instruction to
    re-install may be that will work :(

    $ rpm -q -f /usr/bin/mcc
    drakconf-13.27-1.mga8

    What version of the webkit2 package is installed (that's the one
    that's failing)? I have ... $ rpm -q webkit2 webkit2-2.36.7-1.mga8


    Same for both what do I need to do to re-install them - yes, a bit of a
    long shot :)



    Vincent


    SEEN-BY: 25/0 250/0 1 2 3 4 5 6 12 263/0 467/4
  • From David W. Hodgins@2:250/1 to All on Tue Sep 20 17:23:06 2022
    On Sun, 18 Sep 2022 22:30:13 -0400, David W. Hodgins <dwhodgins@nomail.afraid.org> wrote:

    On Sun, 18 Sep 2022 19:44:20 -0400, Vincent Coen <VBCoen@gmail.com> wrote:

    Hello David!

    Sunday September 18 2022 20:01, David W. Hodgins wrote to All:

    On Sun, 18 Sep 2022 14:28:26 -0400, Vincent Coen <VBCoen@gmail.com>
    wrote:

    Hello All!

    For some months when ever I try and run MCC I get errors as in :

    . - ..
    sudo mcc
    Too late to run INIT block at
    /usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line 257.
    Ignore the following Glib::Object::Introspection & Gtk3 warnings
    Subroutine Gtk3::main redefined at
    /usr/share/perl5/vendor_perl/Gtk3.pm line 539. GLib-GObject-CRITICAL
    **: g_boxed_type_register_static: assertion 'g_type_from_name (name)
    == 0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
    'g_type_from_name (name) == 0' failed at
    /usr/lib64/perl5/DynaLoader.pm line 210. GLib-GObject-CRITICAL **:
    g_boxed_type_register_static: assertion 'g_type_from_name (name) ==
    0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
    'g_type_from_name (name) == 0' failed at
    /usr/lib64/perl5/DynaLoader.pm line 210. "cannot run
    /usr/sbin/isodumper" since it is not installed [Writing ISO] at
    /usr/libexec/drakconf line 833. Oops, secure memory pool already
    initialized Oops, secure memory pool already initialized Overriding
    existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you want
    Webferent signal

    Up to this point, the messages are normal.

    (WebKitWebProcess:2382156): Gdk-ERROR **: 19:22:23.961: The program
    'WebKitWebPran X Window System error.
    This probably reflects a bug in the program.
    The error was 'BadValue (integer parameter out of range for
    operation)'.
    (Details: serial 199 error_code 2 request_code 154 (GLX)
    minor_code 34)
    (Note to programmers: normally, X errors are reported
    asynchronously;
    that is, you will receive the error a while after causing it.
    To debug your program, run it with the GDK_SYNCHRONIZE
    environment
    variable to change this behavior. You can then get a meaningful
    backtrace from your debugger if you break on the gdk_x_error()
    function.)
    Oops, secure memory pool already initialized
    Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if
    you want Webferent signal . - ..

    I moved /etc/mcc.cong to mcc.conf.save to see if thet would help but
    no - it recreated it but with same results.

    This error is stopping me checking or adding software.

    Can any one help me please ?

    Install updates using "sudo urpmi --auto-update" and see if that fixes
    the problem with mcc.

    Report back if it doesn't.

    Nope says packages are up to date followed by a long list of packages that >> are now orphaned which I am ignoring as I did this a few years back and it >> caused chaos !

    What is the name of the mcc packages/s and the instruction to re-install
    may be that will work :(

    $ rpm -q -f /usr/bin/mcc
    drakconf-13.27-1.mga8

    What version of the webkit2 package is installed (that's the one that's failing)?
    I have ...
    $ rpm -q webkit2
    webkit2-2.36.7-1.mga8

    The issue only affects some hardware/video drivers. My three systems have never shown the problem.

    There's a new webkit2 update currently in the core updates testing repo. https://bugs.mageia.org/show_bug.cgi?id=30866

    To install the testing version, as root install and run qarepo.
    In qarepo set the mirror to the mageia directory on your preferred mirror, such as "http://mirror.math.princeton.edu/pub/mageia".
    Set the release to 8, and select the Core checkbox.
    In the RPMS box copy and paste the following lines ... lib64javascriptcoregtk4.0_18-2.36.8-1.mga8 lib64javascriptcore-gir4.0-2.36.8-1.mga8
    lib64webkit2gtk4.0_37-2.36.8-1.mga8
    lib64webkit2gtk-gir4.0-2.36.8-1.mga8
    lib64webkit2-devel-2.36.8-1.mga8
    webkit2-2.36.8-1.mga8
    webkit2-jsc-2.36.8-1.mga8.x86_64.rpm

    Select the Update button.

    You should then be able to install the testing version of webkit2 using either mgaapplet or using "urpmi --auto-select".

    Regards, Dave Hodgins

    --- MBSE BBS v1.0.8 (Linux-x86_64)
    * Origin: A noiseless patient Spider (2:250/1@fidonet)
  • From Vincent Coen@2:250/1 to David W. Hodgins on Wed Sep 21 15:00:27 2022
    Hello David!

    Tuesday September 20 2022 17:23, David W. Hodgins wrote to All:

    On Sun, 18 Sep 2022 22:30:13 -0400, David W. Hodgins <dwhodgins@nomail.afraid.org> wrote:

    On Sun, 18 Sep 2022 19:44:20 -0400, Vincent Coen <VBCoen@gmail.com>
    wrote:

    Hello David!

    Sunday September 18 2022 20:01, David W. Hodgins wrote to All:

    On Sun, 18 Sep 2022 14:28:26 -0400, Vincent Coen
    <VBCoen@gmail.com>
    wrote:

    Hello All!

    For some months when ever I try and run MCC I get errors as in
    :

    . - ..
    sudo mcc
    Too late to run INIT block at
    /usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line
    257.
    Ignore the following Glib::Object::Introspection & Gtk3
    warnings
    Subroutine Gtk3::main redefined at
    /usr/share/perl5/vendor_perl/Gtk3.pm line 539.
    GLib-GObject-CRITICAL
    **: g_boxed_type_register_static: assertion 'g_type_from_name
    (name)
    == 0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static:
    assertion
    'g_type_from_name (name) == 0' failed at
    /usr/lib64/perl5/DynaLoader.pm line 210. GLib-GObject-CRITICAL
    **:
    g_boxed_type_register_static: assertion 'g_type_from_name
    (name) ==
    0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static:
    assertion
    'g_type_from_name (name) == 0' failed at
    /usr/lib64/perl5/DynaLoader.pm line 210. "cannot run
    /usr/sbin/isodumper" since it is not installed [Writing ISO] at
    /usr/libexec/drakconf line 833. Oops, secure memory pool
    already
    initialized Oops, secure memory pool already initialized
    Overriding
    existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you
    want
    Webferent signal

    Up to this point, the messages are normal.

    (WebKitWebProcess:2382156): Gdk-ERROR **: 19:22:23.961: The
    program
    'WebKitWebPran X Window System error.
    This probably reflects a bug in the program.
    The error was 'BadValue (integer parameter out of range for
    operation)'.
    (Details: serial 199 error_code 2 request_code 154 (GLX)
    minor_code 34)
    (Note to programmers: normally, X errors are reported
    asynchronously;
    that is, you will receive the error a while after causing
    it.
    To debug your program, run it with the GDK_SYNCHRONIZE
    environment
    variable to change this behavior. You can then get a
    meaningful
    backtrace from your debugger if you break on the
    gdk_x_error()
    function.)
    Oops, secure memory pool already initialized
    Overriding existing handler for signal 10. Set
    JSC_SIGNAL_FOR_GC if
    you want Webferent signal . - ..

    I moved /etc/mcc.cong to mcc.conf.save to see if thet would
    help but
    no - it recreated it but with same results.

    This error is stopping me checking or adding software.

    Can any one help me please ?

    Install updates using "sudo urpmi --auto-update" and see if that
    fixes
    the problem with mcc.

    Report back if it doesn't.

    Nope says packages are up to date followed by a long list of
    packages that are now orphaned which I am ignoring as I did this a
    few years back and it caused chaos !

    What is the name of the mcc packages/s and the instruction to
    re-install may be that will work :(

    $ rpm -q -f /usr/bin/mcc
    drakconf-13.27-1.mga8

    What version of the webkit2 package is installed (that's the one
    that's failing)? I have ... $ rpm -q webkit2 webkit2-2.36.7-1.mga8

    The issue only affects some hardware/video drivers. My three systems
    have never shown the problem.

    There's a new webkit2 update currently in the core updates testing
    repo.
    https://bugs.mageia.org/show_bug.cgi?id=30866

    To install the testing version, as root install and run qarepo.
    In qarepo set the mirror to the mageia directory on your preferred
    mirror, such as "http://mirror.math.princeton.edu/pub/mageia". Set the release to 8, and select the Core checkbox. In the RPMS box copy and
    paste the following lines
    ... lib64javascriptcoregtk4.0_18-2.36.8-1.mga8 lib64javascriptcore-gir 4.0-2.36.8-1.mga8 lib64webkit2gtk4.0_37-2.36.8-1.mga8 lib64webkit2gtk- gir4.0-2.36.8-1.mga8 lib64webkit2-devel-2.36.8-1.mga8 webkit2-2.36.8-1
    .mga8 webkit2-jsc-2.36.8-1.mga8.x86_64.rpm

    Select the Update button.

    You should then be able to install the testing version of webkit2
    using either mgaapplet or using "urpmi --auto-select".

    Regards, Dave Hodgins

    OK, done the above and used urpmi then ran mcc and get :

    -bash-5.1$ mcc

    Too late to run INIT block at /usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line 257.



    (mcc:2663876): dbind-WARNING **: 14:59:51.319: Couldn't register with accessibility bus: Did not receive a reply. Possible causes include: the
    remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
    Ignore the following Glib::Object::Introspection & Gtk3 warnings
    Subroutine Gtk3::main redefined at /usr/share/perl5/vendor_perl/Gtk3.pm
    line 539.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
    line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
    line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
    line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
    line 210.
    "cannot run /usr/sbin/isodumper" since it is not installed [Writing ISO] at /usr/libexec/drakconf line 833.
    Oops, secure memory pool already initialized
    Oops, secure memory pool already initialized
    Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you
    want WebKit to use a different signal

    (WebKitWebProcess:2663934): Gdk-ERROR **: 15:00:03.186: The program 'WebKitWebProcess' received an X Window System error.
    This probably reflects a bug in the program.
    The error was 'BadValue (integer parameter out of range for operation)'.
    (Details: serial 199 error_code 2 request_code 154 (GLX) minor_code 34)
    (Note to programmers: normally, X errors are reported asynchronously;
    that is, you will receive the error a while after causing it.
    To debug your program, run it with the GDK_SYNCHRONIZE environment
    variable to change this behavior. You can then get a meaningful
    backtrace from your debugger if you break on the gdk_x_error()
    function.)

    Needless to say I cannot access any mcc menu item.


    Vincent


    SEEN-BY: 25/0 250/0 1 2 3 4 5 6 12 263/0 467/4
  • From William Unruh@2:250/1 to All on Wed Sep 21 23:28:48 2022
    On 2022-09-21, Vincent Coen <VBCoen@gmail.com> wrote:

    (removed old replies and suggestion to try mcc from testing)
    OK, done the above and used urpmi then ran mcc and get :

    -bash-5.1$ mcc

    Too late to run INIT block at /usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line 257.



    (mcc:2663876): dbind-WARNING **: 14:59:51.319: Couldn't register with accessibility bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
    Ignore the following Glib::Object::Introspection & Gtk3 warnings
    Subroutine Gtk3::main redefined at /usr/share/perl5/vendor_perl/Gtk3.pm
    line 539.

    That error message I find most strange. What accessibility bus? What
    remote application? Why is mcc trying to connect with a remote (not on
    your system I presume) application. It sounds like your system is set up differently that most. Do you have accessibility stuff on your system?


    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
    line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
    line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
    line 210.
    GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
    line 210.
    "cannot run /usr/sbin/isodumper" since it is not installed [Writing ISO] at /usr/libexec/drakconf line 833.
    Oops, secure memory pool already initialized
    Oops, secure memory pool already initialized
    Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you
    want WebKit to use a different signal

    I do not understand these reference to WebKit.
    What is it? Why is it running? Can you try getting rid of it, and seeing
    if that helps? (It seems to be an Apple browser engine. Why MCC would be
    using it I do not know but it seems to be messing it up, maybe)



    (WebKitWebProcess:2663934): Gdk-ERROR **: 15:00:03.186: The program 'WebKitWebProcess' received an X Window System error.
    This probably reflects a bug in the program.
    The error was 'BadValue (integer parameter out of range for operation)'.
    (Details: serial 199 error_code 2 request_code 154 (GLX) minor_code 34)
    (Note to programmers: normally, X errors are reported asynchronously;
    that is, you will receive the error a while after causing it.
    To debug your program, run it with the GDK_SYNCHRONIZE environment
    variable to change this behavior. You can then get a meaningful
    backtrace from your debugger if you break on the gdk_x_error()
    function.)

    Needless to say I cannot access any mcc menu item.


    Vincent



    --- MBSE BBS v1.0.8 (Linux-x86_64)
    * Origin: A noiseless patient Spider (2:250/1@fidonet)
  • From David W. Hodgins@2:250/1 to All on Thu Sep 22 01:10:08 2022
    On Wed, 21 Sep 2022 18:28:48 -0400, William Unruh <unruh@invalid.ca> wrote:
    On 2022-09-21, Vincent Coen <VBCoen@gmail.com> wrote:
    -bash-5.1$ mcc
    (mcc:2663876): dbind-WARNING **: 14:59:51.319: Couldn't register with
    accessibility bus: Did not receive a reply. Possible causes include: the
    remote application did not send a reply, the message bus security policy
    blocked the reply, the reply timeout expired, or the network connection was >> broken.
    Ignore the following Glib::Object::Introspection & Gtk3 warnings
    Subroutine Gtk3::main redefined at /usr/share/perl5/vendor_perl/Gtk3.pm
    line 539.

    That error message I find most strange. What accessibility bus? What
    remote application? Why is mcc trying to connect with a remote (not on
    your system I presume) application. It sounds like your system is set up differently that most. Do you have accessibility stuff on your system?

    The dbind-warning is from dbus. It's only used for communications between applications on the same system. The term remote in this case does not been over a network, it's just the way dbus handles messages.

    Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you
    want WebKit to use a different signal

    I do not understand these reference to WebKit.
    What is it? Why is it running? Can you try getting rid of it, and seeing
    if that helps? (It seems to be an Apple browser engine. Why MCC would be using it I do not know but it seems to be messing it up, maybe)

    The webkit utility is created by Apple.

    Mageia's webkit2 package description "WebKitGTK is the port of the portable
    web rendering engine WebKit to the GTK platform".

    Vincent, is your system using wayland?

    Regards, Dave Hodgins

    --- MBSE BBS v1.0.8 (Linux-x86_64)
    * Origin: A noiseless patient Spider (2:250/1@fidonet)
  • From Vincent Coen@2:250/1 to David W. Hodgins on Thu Sep 22 14:25:41 2022
    Hello David!

    Thursday September 22 2022 01:10, David W. Hodgins wrote to All:


    Vincent, is your system using wayland?

    Regards, Dave Hodgins


    Looking at o/p from rpmlist.sh I see :

    egl-wayland-json
    kwayland
    kwayland-server
    lib64gstwayland1.0_0
    lib64kf5wayland5
    lib64kwaylandserver5
    lib64nvidia-egl-wayland1
    lib64qt5waylandclient5
    lib64wayland-client0
    lib64wayland-cursor0
    lib64wayland-devel
    lib64wayland-egl1
    lib64wayland-server0
    wayland-protocols-devel
    wayland-tools
    x11-server-xwayland

    Looks like it is, is this the problem and if so how do I remove them -
    assuming it does not break any thing ?


    Vincent


    SEEN-BY: 25/0 250/0 1 2 3 4 5 6 12 263/0 467/4
  • From David W. Hodgins@2:250/1 to All on Thu Sep 22 17:21:30 2022
    On Thu, 22 Sep 2022 09:25:41 -0400, Vincent Coen <VBCoen@gmail.com> wrote:
    Thursday September 22 2022 01:10, David W. Hodgins wrote to All:
    Vincent, is your system using wayland?

    Looks like it is, is this the problem and if so how do I remove them - assuming it does not break any thing ?

    It's not necessary to remove them. Just log out, then at the login screen, before you enter the password, click on where it says "Plasma Wayland",
    and select "Plasma" (or "Plasma on Xorg" depending on the login manager),
    then enter the password and login.

    Regards, Dave Hodgins



    --- MBSE BBS v1.0.8 (Linux-x86_64)
    * Origin: A noiseless patient Spider (2:250/1@fidonet)
  • From Vincent Coen@2:250/1 to David W. Hodgins on Thu Sep 22 18:49:16 2022
    Hello David!

    Thursday September 22 2022 17:21, David W. Hodgins wrote to All:

    On Thu, 22 Sep 2022 09:25:41 -0400, Vincent Coen <VBCoen@gmail.com>
    wrote:
    Thursday September 22 2022 01:10, David W. Hodgins wrote to All:
    Vincent, is your system using wayland?

    Looks like it is, is this the problem and if so how do I remove them
    - assuming it does not break any thing ?

    It's not necessary to remove them. Just log out, then at the login
    screen, before you enter the password, click on where it says "Plasma Wayland", and select "Plasma" (or "Plasma on Xorg" depending on the
    login manager), then enter the password and login.

    Will try that - its possible due for a reboot as uptime is 40 days - which
    for me is very short :)





    Vincent


    SEEN-BY: 25/0 250/0 1 2 3 4 5 6 12 263/0 467/4
  • From Vincent Coen@2:250/1 to David W. Hodgins on Thu Sep 22 19:02:23 2022
    Hello David!

    Thursday September 22 2022 17:21, David W. Hodgins wrote to All:

    On Thu, 22 Sep 2022 09:25:41 -0400, Vincent Coen <VBCoen@gmail.com>
    wrote:
    Thursday September 22 2022 01:10, David W. Hodgins wrote to All:
    Vincent, is your system using wayland?

    Looks like it is, is this the problem and if so how do I remove them
    - assuming it does not break any thing ?

    It's not necessary to remove them. Just log out, then at the login
    screen, before you enter the password, click on where it says "Plasma Wayland", and select "Plasma" (or "Plasma on Xorg" depending on the
    login manager), then enter the password and login.

    I have plasma but not Wayland plasma or not and have booted to it loaded
    mcc at it now operates - at least offering the correct menu options.

    Thanks,




    Vincent


    SEEN-BY: 25/0 250/0 1 2 3 4 5 6 12 263/0 467/4